The Thermionic Vacuum Arc Method for Rapid Deposition of Cu/CuO/Cu2O Thin Film
Source abstract
Abstract
Copper oxide (CuOx) thin film has been deposited on glass substrate using the thermionic vacuum arc (TVA) method. The TVA system works in high-vacuum condition. The microstructural, surface, and optical properties were investigated. Reflection planes corresponding to Cu2O, CuO, and Cu crystal networks were detected in the x-ray diffraction (XRD) pattern. According to the XRD results, the deposited thin film was in polycrystalline form. The grain size, Miller indices, dislocation density, and microstrain were calculated. The crystalline size obtained from the CuO reflections was approximately 20 nm. The average roughness of the deposited film was measured to be 1.8 nm. The height distribution function of the grain size on the deposited surface was determined, revealing a mean grain height of 11 nm. The deposited film exhibited high transparency in the ultraviolet–visible (UV–Vis) spectroscopic region. The refractive index of the film was measured to be 2.20 at 632 nm. The optical bandgap and real part of the dielectric constant were found to be 1.5 eV and 4.84, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. A.A. Al-Ghamdi, M. Khedr, M.S. Ansari, P. Hasan, M.S. Abdel-wahab, and A. Farghali, Physica E 81, 83 (2016).10.1016/j.physe.2016.03.004 ↗
2. J.S.K. Arockiasamy and J. Irudayaraj, Ceram. Int. 42, 6198 (2016).10.1016/j.ceramint.2015.12.180 ↗
3. S.-L. Cheng and M.-F. Chen, Nanoscale Res. Lett. 7, 119 (2012).10.1186/1556-276X-7-119 ↗
4. M. Dahrul and H. Alatas, Procedia Environ. Sci. 33, 661 (2016).10.1016/j.proenv.2016.03.121 ↗
5. L. Debbichi, M. Marco de Lucas, J. Pierson, and P. Kruger, J. Phys. Chem. C 116, 10232 (2012).10.1021/jp303096m ↗
6. A.S. Ethiraj and D.J. Kang, Nanoscale Res. Lett. 7, 70 (2012).10.1186/1556-276X-7-70 ↗
7. D. Jundale, P. Joshi, S. Sen, and V. Patil, J. Mater. Sci. Mater. Electron. 23, 1492 (2012).10.1007/s10854-011-0616-2 ↗
8. S. Karthick Kumar, S. Murugesan, S. Suresh, and S. Paul Raj, J. Sol. Energy 94, 299 (2013).10.1016/j.solener.2013.05.018 ↗
9. H.R. Kim, A. Razzaq, C.A. Grimes, and S.-I. In, J. CO2 Util. 20, 91 (2017).10.1016/j.jcou.2017.05.008 ↗
10. F. Koffyberg and F. Benko, J. Appl. Phys. 53, 1173 (1982).10.1063/1.330567 ↗
11. Ş. Korkmaz, B. Geçici, S.D. Korkmaz, R. Mohammadigharehbagh, S. Pat, S. Özen, V. Şenay, and H.H. Yudar, Vacuum 131, 142 (2016).10.1016/j.vacuum.2016.06.010 ↗
12. K. Mageshwari and R. Sathyamoorthy, Mater. Sci. Semicond. Process. 16, 337 (2013).10.1016/j.mssp.2012.09.016 ↗
13. A. Othonos and M. Zervos, Nanoscale Res. Lett. 6, 622 (2011).10.1186/1556-276X-6-622 ↗
14. A. Ogwu, T. Darma, and E. Bouquerel, J. Achiev. Mater. Manuf. Eng. 24, 172 (2007).
15. J. Pierson, A. Thobor-Keck, and A. Billard, Appl. Surf. Sci. 210, 359 (2003).10.1016/S0169-4332(03)00108-9 ↗
16. C. Surdu-Bob, R. Vladoiu, M. Badulescu, and G. Musa, Diamond Relat. Mater. 17, 1625 (2008).10.1016/j.diamond.2008.02.032 ↗
17. C. Surdu-Bob, I. Mustata, and C. Iacob, J. Optoelectron. Adv. Mater. 9, 2932 (2007).
18. H. Ehrich, J. Schuhmann, G. Musa, A. Popescu, and I. Mustata, Thin Solid Films 333, 95 (1998).10.1016/S0040-6090(98)00842-6 ↗
19. M. Özkan, N. Ekem, M. Balbag, and S. Pat, Proc. IME J. Mater. Des. Appl. 226, 103 (2012).
20. S. Özen, V. Şenay, S. Pat, and Ş. Korkmaz, Scanning 38, 14 (2015).10.1002/sca.21237 ↗
21. S.-M. Park, A. Razzaq, Y.H. Park, S. Sorcar, Y. Park, C.A. Grimes, and S.-I. In, ACS Omega 1, 868 (2016).10.1021/acsomega.6b00164 ↗
22. A. El Sayed, S. El-Gamal, W. Morsi, and G. Mohammed, J. Mater. Sci. 50, 4717 (2015).10.1007/s10853-015-9023-z ↗
23. K.I. Mohammed, A.S. Jasim, and S.N. Rashid, Int. J. Phys. 4, 59 (2016).