journal article·2017-07

Magnetic Properties of Hematite-Titania Nanocomposites from Ilmenite Leachant Solutions

M. M. S. Sanad, M. M. Rashad

Journal of Electronic Materials· Volume 46· Issue 7
Publisher page

Abstract

Different Fe2O3/TiO2 nanocomposite ratios have been auto-synthesized from the leaching solution of Egyptian ilmenite ore with and without solvent extraction of soluble iron ions. Hydrolysis-hydrothermal strategy was then implemented for preparation of Fe2O3-TiO2 nanocomposites. The x-ray diffraction results indicated that rutile and hematite were only found at high iron oxide content. Meanwhile, anatase and hematite were the predominant phases at low iron oxide content. High-resolution transmission electron microscopy investigations exhibited nano-rods like morphology and the space lattice distances of TiO2 and Fe2O3 were clearly estimated. Moreover, the chemical composition of different Fe2O3-TiO2 nanocomposites was also elucidated using energy dispersive spectroscopy and Fourier transform infrared analyses techniques. The values of saturation magnetization (Ms) and remanent magnetization (Mr) were noticeably increased by 17.5% and 18.4% with increasing the Fe2O3/TiO2 molar ratio from 1.0 to 3.0, respectively. Field cooling-warming magnetization studies showed that the Morin transition temperature (TM = 200 K) was consistent with the previously published values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Minerals Flotation and Separation Techniques · Iron oxide chemistry and applications · Geochemistry and Elemental Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. J. Tian, Z. Zhao, A. Kumar, R.I. Boughton, and H. Liu, Chem. Soc. Rev. 43, 6920 (2014).10.1039/C4CS00180J ↗
2. M.M.S. Sanad, M.M. Rashad, and K. Powers, Appl. Phys. A 118, 655 (2015).10.1007/s00339-014-8775-7 ↗
3. M.M.S. Sanad, A.E. Shalan, M.M. Rashad, and M.H.H. Mahmoud, Appl. Surf. Sci. 359, 315 (2015).10.1016/j.apsusc.2015.10.106 ↗
4. T. Takamura, P.J. Ko, J. Sharma, R. Yukino, S. Ishizawa, and A. Sandhu, Sensors http://www.ncbi.nlm.nih.gov/pub med/2605374715 , 12983 (2015).10.3390/s150612983 ↗
5. H. Hong, J. Lim, C.J. Choi, S.W. Shin, and H.J. Krause, Rev. Sci. Instrum. 85, 013705 (2014).10.1063/1.4861916 ↗
6. J. Zhu, S. Wei, M. Chen, H. Gu, S.B. Rapole, S. Pallavkar, T.C. Ho, J. Hopper, and Z. Guo, Appl. Surf. Sci. 302, 198 (2014).10.1016/j.apsusc.2013.10.138 ↗
7. D.K. Yi, S.S. Lee, and J.Y. Ying, Chem. Mater. 18, 2459 (2006).10.1021/cm052885p ↗
8. S.H. Hussein-Al-Ali, M.E. El Zowalaty, M.Z. Hussein, M. Ismail, D. Dorniani, and T.J. Webster, Int. J. Nanomed. 9, 351 (2014).
9. H.-C. Huang, G.-L. Huang, H.-L. Chen, and Y.-D. Lee, Thin Solid Films 515, 1033 (2006).10.1016/j.tsf.2006.07.071 ↗
10. K.E. Dekrafft, C. Wang, and W. Lin, Adv. Mater. 24, 2014 (2012).10.1002/adma.201200330 ↗
11. L. Sun, W. Wu, S. Zhang, Y. Liu, X. Xiao, F. Ren, G. Cai, and C. Jiang, J. Nanosci. Nanotechnol. 13, 5428 (2013).10.1166/jnn.2013.7495 ↗
12. C.T. Fleacaa, M. Scarisoreanua, I. Morjana, R. Alexandrescua, F. Dumitrachea, C. Luculescua, I.P. Morjana, R. Birjegaa, A.M. Niculescua, G. Filotib, V. Kuncserb, E. Vasilec, V. Danciud, and M. Popa, Appl. Surf. Sci. 302, 198 (2014).10.1016/j.apsusc.2013.10.138 ↗
13. S. Chen, Y. Zhang, W. Han, D. Wellburn, J. Liang, and C. Liu, Appl. Surf. Sci. 283, 422 (2013).10.1016/j.apsusc.2013.06.125 ↗
14. H. Liu, H.K. Shon, X.A. Sun, S. Vigneswaran, and N. Hao, Appl. Surf. Sci. 257, 5813 (2011).10.1016/j.apsusc.2011.01.110 ↗
15. A.K. Patra, A. Dutta, and A. Bhaumik, Appl. Mater. Interfaces 4, 5022 (2012).10.1021/am301394u ↗
16. E.A. Abdel-Aal, M.H.H. Mahmoud, M.M.S. Sanad, A. Criscuoli, A. Figoli, and E. Drioli, Int. J. Miner. Proc. 96, 62 (2010).10.1016/j.minpro.2010.05.002 ↗
17. M.H.H. Mahmoud, A.A. Ismail, and M.M.S. Sanad, Chem. Eng. J. 187, 96 (2012).10.1016/j.cej.2012.01.105 ↗
18. M.H.H. Mahmoud, A.A. Afifi, and I.A. Ibrahim, Hydrometallurgy 73, 99 (2004).10.1016/j.hydromet.2003.08.001 ↗
19. C.A. Grimes and G.K. Mor, TiO2 Nanotube Arrays: Synthesis, Properties, and Applications, pp 1–385, p 200, Springer Science & Business Media, 2009, ISBN1441900683, 9781441900685.10.1007/978-1-4419-0068-5_1 ↗
20. D.A.H. Hanaor and C.C. Sorrell, J. Mater. Sci. 46, 855 (2011).10.1007/s10853-010-5113-0 ↗
21. M.A. Ahmed, E.E. El-Katori, and Z.H. Gharni, J. Alloys Compd. 553, 19 (2013).10.1016/j.jallcom.2012.10.038 ↗
22. M.M. Ba-Abbad, A.H. Kadhum, A.B. Mohamad, M.S. Takriff, and K. Sopian, Int. J. Electrochem. Sci. 7, 4871 (2012).10.1016/S1452-3981(23)19588-5 ↗
23. H. Xia, W. Xiong, C.K. Lim, Q. Yao, Y. Wang, and J. Xie, Nano Res. 7, 1797 (2014).10.1007/s12274-014-0539-3 ↗
24. S. Dai, Y. Wu, T. Sakai, Z. Du, H. Sakai, and M. Abe, Nanoscale Res. Lett. 5, 1829 (2010).10.1007/s11671-010-9720-0 ↗
25. S. Bagheri, K. Shameli, and S.B. Abd Hamid, J. Chem. 2013, 1 (2013).10.1155/2013/848205 ↗
26. L. Chena, X. Pang, Y. Guangshui, and J. Zhang, Adv. Mater. Lett. 1, 75 (2010).10.5185/amlett.2010.4117 ↗
27. M. Hema, A.Y. Arasi, P. Tamilselvi, and R. Anbarasan, Chem. Sci Trans. 2, 239 (2013).10.7598/cst2013.344 ↗
28. L. Li, D. Qin, X. Yang, and G. Liu, Polym. Chem. 1, 289 (2010).10.1039/B9PY00230H ↗
29. S.Z. Mohammadi, M. Khorasani-Motlagh, Sh. Jahani, and M. Yousefi, Int. J. Nanosci. Nanotechnol. 8, 87 (2012).
30. V. Paredes-Garcia, N. Toledo, J. Denardin, D. Venegas-Yazigi, C. Cruz, E. Spodine, and Z. Luo, J. Chil. Chem. Soc. 58, 2011 (2013).10.4067/S0717-97072013000400023 ↗
31. N. Rinaldi-Montes, P. Gorria, D. Martínez-Blanco, A.B. Fuertes, L.F. Barquín, J. Rodríguez Fernandez, I. de Pedro, M.L. Fdez-Gubieda, J. Alonso, L. Olivi, G. Aquilantie, and J.A. Blanco, Nanoscale 6, 457 (2014).10.1039/C3NR03961G ↗
32. Q. Pan, K. Huang, S. Ni, F. Yang, S. Lin, and D. He, J. Phys. D Appl. Phys. 42, 015417 (2009).10.1088/0022-3727/42/1/015417 ↗
33. M.S. Islam, Y. Kusumoto, and M. Abdulla-Al-Mamun, Mater. Lett. 66, 165 (2012).10.1016/j.matlet.2011.08.057 ↗
34. N.M. Deraz and A. Alarifi, Ceram. Int. 38, 4049 (2012).10.1016/j.ceramint.2011.12.081 ↗
35. F. Bødker, M.F. Hansen, C.B. Koch, K. Lefmann, and S. Mørup, Phys. Rev. B 61, 6826 (2000).10.1103/PhysRevB.61.6826 ↗
36. S.A. Jayanthi, D.M.G.T. Nathan, J. Jayashainy, and P. Sagayaraj, Mater. Chem. Phys. 162, 316 (2015).10.1016/j.matchemphys.2015.05.073 ↗
37. M. Reufer, H. Dietsch, U. Gasser, B. Grobety, A.M. Hirt, V.K. Malik, and P. Schurtenberger, J. Phys. Condens Matter 16, 065102 (2011).10.1088/0953-8984/23/6/065102 ↗
38. J.P. Vejpravova, D. Niznansky, V. Vales, B. Bittova, V. Tyrpek, S. Danis, V. Holy, and S. Doyle, Int. J. Chem. Mol. Nucl. Mater. Metall. Eng. 6, 6 (2012).