journal article·2017-07

Tensile/Shear Behaviour of Multi-stitched/Nano Composites

Kadir Bilisik, Gaye Kaya

Journal of Electronic Materials· Volume 46· Issue 7
Publisher page

Abstract

This study aims to investigate tensile/shear behavior of multi-stitched/nano composites. For this purpose, non-stitched, non-stitched/nano, multi-stitched and multi-stitched/nano composites were made. It was shown that the warp/filling tensile strength and modulus of composites were slightly reduced in both multi-stitched and multi-stitched/nano composites due to fiber breakage that resulted from the multi-stitching process. In addition, there were not significant differences between non-stitched and multi-stitched structures. The non-stitched/nano composite showed slightly higher in-plane shear strength compared with the non-stitched composite. The in-plane shear strength of the non-stitched composite, on the other hand, increased steadily compared to the multi-stitched composite because of the stitching process and the interface between the stitching yarn and polymer matrix. Stitching significantly improved the delamination resistance in the multi-stitched and multi-stitched/nano composites experienced a small amount of damaged areas. The incorporation of nano silica improved the damage resistance of multi-stitched composites. Therefore, the damaged tolerance composite was developed with stitching and the addition of the nano silica for various industrial applications, such as electronic boards.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Polydiacetylene-based materials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. O. Al-Khudairi and H. Ghasemnejad, Renew. Energ. 81, 936 (2015).10.1016/j.renene.2015.04.015 ↗
2. J.S. Mumby, J. Electron. Mater. 18, 241 (1989).10.1007/BF02657415 ↗
3. J.S. Mumby and J. Yuan, J. Electron. Mater. 18, 287 (1989).10.1007/BF02657420 ↗
4. A. Yonetken, GU J. Sci. 28, 419 (2015).
5. J.A. Paulson, A. Mesbah, X. Zhu, M.C. Molaro, and R.D. Braatz, J. Process Contr. 27, 38 (2015).10.1016/j.jprocont.2014.10.005 ↗
6. A.P. Mouritz, J. Mater. Design. Appl. 218, 87 (2004).
7. K.T. Tan, N. Watanabe, and Y. Iwahori, Int. J. Damage Mech. 21, 51 (2012).10.1177/1056789510397070 ↗
8. K.T. Tan, N. Watanabe, and Y. Iwahori, Compos. Part B Eng. 42, 874 (2011).10.1016/j.compositesb.2011.01.011 ↗
9. T.C. Truong, M. Vettori, S. Lomov, and I. Verpoest, Compos. Part A Appl. Sci. 36, 1207 (2005).10.1016/j.compositesa.2005.02.004 ↗
10. U. Beier, F. Fischer, J.K.V. Sandler, V. Altstadt, C. Weimer, and W. Buchs, Compos. Part A Appl. Sci. 38, 1655 (2007).10.1016/j.compositesa.2007.02.007 ↗
11. C. Weimer and P. Mitschang, Compos. Part A Appl. Sci. 32, 1477 (2011).10.1016/S1359-835X(01)00046-X ↗
12. K. Bilisik, Text. Res. J. 82, 1442 (2012).10.1177/0040517512438132 ↗
13. W.D. Freeston Jr., M.M. Platt, and M.M. Schoppee, Text. Res. J. 37, 948 (1967).10.1177/004051756703701107 ↗
14. J. Launay, G. Hivest, A.V. Duong, and P. Boisse, Compos. Sci. Technol. 68, 506 (2008).10.1016/j.compscitech.2007.06.021 ↗
15. A.G. Prodromou and J. Chen, Compos. Part A Appl. Sci. 28, 491 (1997).10.1016/S1359-835X(96)00150-9 ↗
16. K. Bilisik, J. Reinf. Plast. Compos. 29, 1173 (2010).10.1177/0731684409103153 ↗
17. A.H. Weisberg, S.M. Aceves, F. Espinosa-Loza, E.L. Orozco, B. Myers, and B. Spencer, Int. J. Hydrog. Energy 38, 9271 (2013).10.1016/j.ijhydene.2013.05.068 ↗
18. F. Sen and A. Uckardas, J. Polytech. 16, 97 (2013).
19. N.D. Greef, L. Gorbatikh, S.V. Lomov, and I. Verpoest, Compos. Part A Appl. Sci. 42, 1635 (2011).10.1016/j.compositesa.2011.07.013 ↗
20. V. Yong and H.T. Hahn, Nanotechnolgy 15, 1338 (2004).10.1088/0957-4484/15/9/038 ↗
21. A. Patnaik, A. Satapathy, S.S. Mahapatra, and R.R. Dash, J. Reinf. Plast. Compos. 28, 1305 (2009).10.1177/0731684407086589 ↗
22. D.C. Davis, J.W. Wilkerson, J. Zhu, and V.G. Hadjiev, Compos. Sci. Technol. 71, 1089 (2011).10.1016/j.compscitech.2011.03.014 ↗
23. F.H. Gojny, M.H.G. Wichmann, B. Fiedler, and K. Schulte, Compos. Sci. Technol. 65, 2300 (2005).10.1016/j.compscitech.2005.04.021 ↗
24. J. Zhu, A. Imam, R. Crane, K. Lozano, V.N. Khabashesku, and E.V. Barrera, Compos. Sci. Technol. 67, 1509 (2007).10.1016/j.compscitech.2006.07.018 ↗
25. K. Bilisik and G. Yolacan, Fiber. Polym. 15, 614 (2014).10.1007/s12221-014-0614-0 ↗