Fabrication of Multilayer-Type Mn-Si Thermoelectric Device
Source abstract
Abstract
This research aims to develop a direct-contact manganese silicon p/n multilayer-type thermoelectric power generation block. p-type MnSi1.74 and n-type Mn0.7Fe0.3Si1.68 ball-milled powders with diameter of about 10 μm or less were mixed with polyvinyl butyl alcohol diluted with methylbenzene at pigment volume concentration of approximately 70%. The doctor-blade method produced 45-μm-thick p- and n-type pigment plates. The insulator, i.e., powdered glass, was mixed with cellulose to form insulator slurry. Lamination of manganese silicide pigment layers and screen-printed insulator layers was carried out to fabricate multilayer direct-contact thermoelectric devices. Hot pressing and spark plasma sintering were carried out at 450°C and 900°C, respectively. Four to 30 thermoelectric (TE) p/n pairs were fabricated in a 10 mm × 10 mm × 10 mm sintered TE block. The maximum output was 11.7 mW/cm2 at a temperature difference between 20°C and 700°C, which was about 1/85 of the ideal power generation estimated from the thermoelectric data of the bulk MnSi1.74 and Mn0.7Fe0.3Si1.68 materials. A power generation test using an engine test bench was also carried out.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. V.K. Zaitsev, Thermoelectric Properties of Anisotropic MnSi1.75.CRC Handbook of Thermoelectrics, ed. D.M. Rowe (NY: CRC Press, 1995),
2. M.I. Fedorov and V.K. Zaitsev, Thermoelectrics of Transition Metal Silicides.Thermoelectric Handbook: Macro to Nano, ed. D.M. Rowe (Boca Raton: CRC Press, 2006), pp. 31–33.
3. Y. Miyazaki, Y. Saito, K. Hayashi, K. Yubuta, and T. Kajitani, Jpn. J. Appl. Phys. 50, 035804 (2011).10.7567/JJAP.50.035804 ↗
4. S. Asanabe, J. Phys. Soc. Japan 20, 933 (1965).10.1143/JPSJ.20.933 ↗
5. I. Aoyama, M.I. Fedorov, V.K. Zaitsev, F.Yu. Solomkin, I.S. Eremin, A.Yu. Samunin, M. Muroujima, S. Sano, and T. Tsuji, Jpn. Soc. Appl. Phys. 44, 8562 (2005).10.1143/JJAP.44.8562 ↗
6. T. Kajikawa, Thermoelectric Power Generation System Recovering Industrial Waste Heat.Thermoelectric Handbook: Macro to Nano, ed. D.M. Rowe (Boca Raton: CRC Press, 2006),