Thermoelectric Properties of Cu-Doped n-Type Bi2Te2.85Se0.15 Prepared by Liquid Phase Growth Using a Sliding Boat
Source abstract
Abstract
N-type Bi2Te2.85Se0.15 thermoelectric materials were prepared by liquid phase growth (LPG) using a sliding boat, a simple and short fabrication process for Bi2Te3-related materials. Cu was selected as a donor dopant, and its effect on thermoelectric properties was investigated. Thick sheets and bars of Cu x Bi2 Te2.85Se0.15 (x=0–0.25) of 1–2mm in thickness were obtained using the process. X-ray diffraction patterns and scanning electron micrographs showed that the in-plane direction tended to correspond to the hexagonal c-plane, which is the preferred direction for thermoelectric conversion. Cu-doping was effective in controlling conduction type and carrier (electron) concentration. The conduction type was p-type for undoped Bi2Te2.85Se0.15 and became n-type after Cu-doping. The Hall carrier concentration was increased by Cu-doping. Small resistivity was achieved in Cu0.02Bi2Te2.85Se0.15 owing to an optimized amount of Cu-doping and high crystal orientation. As a result, the maximum power factor near 310K for Cu0.02Bi2Te2.85Se0.15 was approximately 4×10−3W/K2m and had good reproducibility. Furthermore, the thermal stability of Cu0.02Bi2Te2.85Se0.15 was also confirmed by thermal cycling measurements of electrical resistivity. Thus, n-type Bi2Te2.85Se0.15 with a large power factor was prepared using the present LPG process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Thermodynamics and Statistical Mechanics · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. W.M. Yim and F.D. Rosi, Solid-State Electron. 15, 1121 (1972).10.1016/0038-1101(72)90172-4 ↗
2. J.R. Wiese and L. Muldawer, J. Phys. Chem. Solids 15, 13 (1960).10.1016/0022-3697(60)90094-9 ↗
3. H. Kaibe, Y. Tanaka, M. Sakata, and I. Nishida, J. Phys. Chem. Solids 50, 945 (1989).10.1016/0022-3697(89)90045-0 ↗
4. I.J. Ohsugi, T. Kojima, and I.A. Nishida, J. Appl. Phys. 68, 5692 (1990).10.1063/1.346985 ↗
5. M. Carle, P. Pierrat, C.L. Graver, S. Scherrer, and H. Scherrer, J. Phys. Chem. Solids 56, 201 (1995).10.1016/0022-3697(94)00166-9 ↗
6. Y. Kinemuchi, T. Aoki, H. Kaga, K. Okanoue, H. Ishiguro, and K. Watari, J. Electron. Mater. 38, 1089 (2009).10.1007/s11664-008-0640-z ↗
7. Y.F. Zhou, X.Y. Li, S.Q. Bai, and L.D. Chen, J. Cryst. Growth 312, 775 (2010).10.1016/j.jcrysgro.2009.12.061 ↗
8. H. Kitagawa, T. Nagamori, T. Tatsuta, T. Kitamura, Y. Shinohara, and Y. Noda, Scr. Mater. 49, 309 (2003).10.1016/S1359-6462(03)00278-1 ↗
9. H. Kitagawa, T. Takino, T. Tsukutani, T. Kato, M. Nanba, and K. Kamata, J. Electron. Mater. 42, 2043 (2013).10.1007/s11664-013-2518-y ↗
10. O.B. Sokolov, S.Ya. Skipidarov, and N.I. Duvankov, J. Thermoelectr. 4, 48 (2003).
11. O.B. Sokolov, SYa Skipidarov, N.I. Duvankov, and G.G. Shabunina, J. Cryst. Growth 262, 442 (2004).10.1016/j.jcrysgro.2003.10.073 ↗
12. T.E. Svechnikova, P.P. Konstantinov, and G.T. Alekseeva, Inorg. Mater. 36, 556 (2000).10.1007/BF02757952 ↗
13. D.B. Hyun, J.S. Hwang, B.C. You, T.S. Oh, and C.W. Hwang, J. Mater. Sci. 33, 5595 (1998).10.1023/A:1004460030657 ↗
14. W.S. Liu, Q. Zhang, Y. Lan, S. Chen, X. Yan, Q. Zhang, H. Wang, D. Wang, G. Chen, and Z. Ren, Adv. Energy Mater. 1, 577 (2011).10.1002/aenm.201100149 ↗
15. M.K. Zhitinskaya, S.A. Nemov, and T.E. Svechnikova, Semiconductors 41, 1140 (2007).10.1134/S1063782607100028 ↗
16. S. Fujimoto, S. Sano, and T. Kajitani, J. Alloy. Compd. 443, 182 (2007).10.1016/j.jallcom.2007.03.037 ↗
17. D.L. Greenaway and G. Harbeke, J. Phys. Chem. Solids 26, 1585 (1965).10.1016/0022-3697(65)90092-2 ↗