Influence of Thermal Cycling on the Thermal Resistance of Solder Interfaces
Source abstract
Abstract
The thermal resistance of Si/Sn-52In/Cu sandwiched samples was measured by the laser flash method after various stages of thermal cycling. The thermal resistance was found to increase with increasing thermal cycles after 120 cycles. Cross-sections of the samples were examined by scanning electron microscopy. Cracks were observed in both the solder bulk and the interface between the intermetallic compound and solder. The increase of the thermal resistance was related to widening of the crack segments that were inclined to the interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Thermal properties of materials · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. F. Sarvar, D.C. Whalley, and P.P. Conway, Electronics System Integraion Technology conference (Dresden, Germany, 2006), p. 1292.10.1109/ESTC.2006.280178 ↗
2. Amy S. Fleischer, L.H. Chang, and Barry C. Johnson, Microelectron. Reliab., 46, 794 (2004).10.1016/j.microrel.2005.01.019 ↗
3. X.J. Hu, L.N. Jiang, and K.E. Goodson, 20th IEEE SEMI-THERM Symposium (2004), p. 98.
4. W.T. Chen and C. W. Nelson, IBM J. Develop, 23, 179 (1979).10.1147/rd.232.0179 ↗
5. J. He, W.L. Morris, M.C. Shaw, and N. Sridhar, International Symposium on Microelectronics (1998), p. 583
6. D.R. Olsen and H.M. Berg, IEEE Trans. Comp. Hybrids Manuf. Technol., CHMT-2, 257 (1979).10.1109/TCHMT.1979.1135450 ↗
7. W.J. Parker, R. J. Jenkins, C. P. Butler and G. L. Abbott, J. Appl. Phys., 32, 1679 (1961).10.1063/1.1728417 ↗
8. R. Prasher, Proc. IEEE 94, 1571 (2006).10.1109/JPROC.2006.879796 ↗
9. H. Inoue, Y. Kurihara, and H. Hachino, IEEE Trans. Comp. Hybrids. Manuf. Technol., CHMT-9, 190 (1986).10.1109/TCHMT.1986.1136634 ↗
10. W.H. Moy and Y.–L. Shen, Microelectron. Reliab., 47, 1300, (2007).10.1016/j.microrel.2006.08.021 ↗
11. J. W. Hutchinson and Z. Suo, Adv. Appl. Mech., 29, 63, (1992).10.1016/S0065-2156(08)70164-9 ↗
12. D.-G. Kim and S.-B. Jung, J. Alloy Compd., 386, 151, (2005).10.1016/j.jallcom.2004.05.055 ↗
13. H.P.R. Frederikse, R.J. Fields, and A. Feldman, J. Appl. Phys., 72, 2879, (1992).10.1063/1.351487 ↗
14. H.L.J. Pang, K.H. Tan, X.Q. Shi, and Z.P. Wang, Mater. Sci. Eng., 307, 42, (2001).10.1016/S0921-5093(00)01958-4 ↗
15. P.L. Hacke, Y. Fahmy, and H. Conrad, J. Electron. Mater., 27, 941, (1998).10.1007/s11664-998-0125-0 ↗