journal article·2004-11

Etching of 4H-SiC using a NF3 inductively coupled plasma

Byungwhan Kim, Byung-Teak Lee

Journal of Electronic Materials· Volume 33· Issue 11
Publisher page

Abstract

Etching of silicon carbide (SiC) was conducted in a NF3/CH4 inductively coupled plasma (ICP) at low pressure. The etch responses examined include the etch rate, surface roughness, and profile angle. For the variations in the source power, the direct-current (DC) bias strongly affected the etch rate. The profile angle varied inconsistently with the bias power. It was commonly observed without regard to the pressure level that, at lower gas ratios, the surface roughness was inversely related to the DC bias. At higher gas ratios, the surface roughness seemed to be dominated by surface reactions. In estimating etch mechanisms, the DC bias played an important role in qualitatively separating chemical and physical effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Electrostatic Discharge in Electronics · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. R. Wolf and R. Helbig, J. Electrochem. Soc. 143, 1037 (1996).10.1149/1.1836578 ↗
2. P.H. Yih and A.J. Steckl, J. Electrochem. Soc. 142, 312 (1995).10.1149/1.2043918 ↗
3. A. Tasaka et al., J. Vac. Sci. Technol. A 20, 1254 (2002).10.1116/1.1481044 ↗
4. J.B. Casady, S.S. Mani, R.R. Siergiej, W. Urban, V. Balakrishna, P.A. Sanger, and C.D. Brandt, J. Electrochem. Soc. 154, L53 (1998).
5. M. Kothandaraman, D. Alok, and B.J. Baliga, J. Electron. Mater. 25, 875 (1996).10.1007/BF02666652 ↗
6. J.J. Wang, E.S. Lambers, S.J. Pearton, M. Ostling, C.M. Zetterling, J.M. Grow, F. Ren, and R.J. Shul, J. Vac. Sci. Technol. A 16, 2204 (1998).10.1116/1.581328 ↗
7. H.J. Coi and B.-T Lee, J. Electron. Mater., 32, 1 (2003).10.1007/s11664-003-0244-6 ↗
8. L. Cao, B. Li, and H. Zhao, J. Electrochem. Soc. 145, 3609 (1998).10.1149/1.1838850 ↗
9. F.A. Khan and I. Adesida, Appl. Phys. Lett. 75, 2268 (1999).10.1063/1.124986 ↗
10. B. Kim, S. Kong, and B.T. Lee, J. Vac. Sci. Technol. A 20, 146 (2002).10.1116/1.1427882 ↗
11. B. Kim, H.J. Choi, and B.T. Lee, J. Vac. Sci. Technol. A 20, 424 (2002).10.1116/1.1448509 ↗
12. B. Kim and B. Lee, IEEE Trans. Plasma Sci. 30, 2074 (2002).10.1109/TPS.2002.807497 ↗
13. S.M. Kong, H.J. Choi, B.T. Lee, S.Y. Han, and J.L. Lee, J. Electron. Mater. 31, 209 (2002).10.1007/s11664-002-0208-2 ↗
14. R. Van Roijen, C.W.T. Bulle-Lieuwma, and E.A. Montie, J. Vac. Sci. Technol. B 10, 2188 (1992).10.1116/1.586187 ↗
15. B.-T Lee, S.-Y. Jung, J.-L. Lee, Y.-J Park, M.-C. Paek, and K.-I. Cho, Semicond. Sci. Technol. 16, 471 (2001).10.1088/0268-1242/16/6/309 ↗
16. B. Kim and K. Kwon, J. Appl. Phys. 93, 76 (2003).10.1063/1.1527216 ↗
17. J.R. Flemish and K. Xie, J. Electrochem. Soc. 143, 2620 (1996).10.1149/1.1837058 ↗
18. S. Samukawa, Appl. Phys. Lett. 68, 316 (1996).10.1063/1.116071 ↗
19. B. Kim, J.H. Sun, C.J. Choi, D.D. Lee, and Y.S. Seol, J. Vac. Sci. Technol. A 18, 417 (2000).10.1116/1.582203 ↗
20. B. Kim, S. Kim, S.-C. Ahn, and B.-T. Lee, Thin Solid Films 434, 276 (2003).10.1016/S0040-6090(03)00459-0 ↗
21. C.M. Melier-Smith and C.J. Mogab, Thin Film Processes (New York: Academic Press, 1978), p. 540.