Characterization and Electrochemical Mechanism for Bromide-Containing Conductive Anodic Filament (CAF) Failure
Source abstract
Abstract
Conductive anodic filament (CAF) is a failure mode in printed wiring boards (PWBs) that occurs under temperature–humidity–bias (T–H–B) conditions. The filament, which is copper containing, grows subsurface from the anode to the cathode along the epoxy–glass fiber interface. In this study, hole-to-hole test coupons were processed using two thermal excursions for a high-bromide-containing (~15 wt.%) hot air soldering leveling (HASL) fluid. The coupons were then exposed to accelerated temperature, humidity, and bias conditions of 85°C, 85% relative humidity (RH), and 200 V bias, respectively, for 28 days. The aged coupons were then cross-sectioned, and scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) revealed that, in addition to bromide CAF, a copper-bromide-containing compound was present in the polymer matrix. The bromide-containing CAF was characterized using transmission electron microscopy (TEM) to be Cu2(OH)3Br. In addition, the copper-containing compound formed in the polymer matrix was characterized using x-ray photoelectron spectroscopy (XPS) to be CuBr. An electrochemical mechanism for the formation of bromide-containing CAF has been proposed based on the XPS data. It has been shown using Fourier-transform infrared (FTIR) spectroscopy that the polyol constituent from the flux diffuses into the board during soldering. Ion chromatography was used to show that bromide ions from the flux also diffuse into the board material during soldering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical Analysis and Applications · Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. P.J. Boddy, R.H. Delaney, J.N. Lahti, and E.F. Landry, 14th Annual Proceedings of Reliability Physics (1976), p. 108.
2. J.N. Lahti, R.H. Delaney, and J.H. Hines, 17th Annual Proceedings of Reliability Physics (1979), p. 39.
3. D.J. Lando, J.P. Mitchell, and T.L. Welsher, 17th Annual Proceedings of Reliability Physics (1979), p. 51.
4. T.L. Welsher, J.P. Mitchell, and D.J. Lando, 18th Annual Proceedings of Reliability Physics (1980), p. 235.
5. T.L. Welsher, J.P. Mitchell, and D.J. Lando, Annual Report of the Conference on Electrical Insulation and Dielectric Phenomena (1980), p. 234.
6. A. DerMarderosian, Proceedings of IPC (Fall Meeting) (San Francisco, 1976), p. 708.
7. F.M. Zado, AT&T Eng. 27, 41 (1983).
8. J. Brous, Electron. Packag. Prod. 21, 80 (1981).
9. J. Brous, Proceedings of NEPCON West (1992), p. 386.
10. J.A. Jachim (Masters of Science Thesis in Metallurgy, Georgia Institute of Technology, 1994).
11. W.J. Ready (Master of Science Thesis in Metallurgy, Georgia Institute of Technology, 1997).
12. W.J. Ready (PHD Thesis in Materials Science and Engineering, Georgia Institute of Technology, 2000).
13. W.J. Ready and L.J. Turbini, J. Electron. Mater. 31, 1208 (2002).10.1007/s11664-002-0012-z ↗
14. W.J. Ready, L.J. Turbini, S.R. Stock, and B.A. Smith, 34th Annual Proceedings of Reliability Physics, Dallas, TX (1996), p. 267.
15. A. Caputo, L.J. Turbini, and D.D. Perovic, J. Electron. Mater. 39, 85 (2010).10.1007/s11664-009-0964-3 ↗
16. A. Caputo, L.J. Turbini, and D.D. Perovic, J. Electron. Mater. 39, 92 (2010).10.1007/s11664-009-0965-2 ↗
17. C.F. Coombs, Printed Circuits Handbook, 5th ed. (New York: McGraw-Hill, 2001).
18. D.R. Lefebvre, K.M. Takahashi, A.J. Muller, and W.R. Raju, J. Adhes. Sci. Technol. 5, 201 (1991).10.1163/156856191X00152 ↗
19. Joint Committee for Powder Diffraction Standards Powder Diffraction File, International Center for Diffraction Data, Swarthmore, PA (Card Number 00-045-1309,1986).
20. M.J. Munoz-Portero, J. García-Antón, J.L. Guiñón, and V. Pérez-Herranz, Corrosion 60, 749 (2004).10.5006/1.3287854 ↗
21. R.L. Brossard, Can. J. Chem. 62, 36 (1984).
22. B. Hibbert, S. Richards, and V. Gonzalves, Corros. Sci. 30, 367 (1990).10.1016/0010-938X(90)90044-6 ↗
23. T. Aben and D. Tromans, J. Electrochem. Soc. 142, 398 (1995).10.1149/1.2044031 ↗
24. Z.H. Gu, S.J. Xia, and T.Z. Fahidy, Electrochim. Acta 41, 2045 (1996).10.1016/0013-4686(96)00010-2 ↗
25. V. Perez-Herranz, M.T. Montañés, J. García-Antón, and J.L. Guiñón, Corrosion 57, 835 (2001).10.5006/1.3290310 ↗
26. A. Igual-Munoz, J.G. Antón, J.L. Guiñón, and V.P. Herranz, Corrosion 58, 560 (2002).10.5006/1.3277647 ↗
27. A. Igual-Munoz, J. García-Antón, J.L. Guiñón, and V. Pérez-Herranz, Corrosion 57, 516 (2001).10.5006/1.3290377 ↗
28. M. Itagaki, Y. Hirata, and K. Watanabe, Corros. Sci. 45, 1023 (2003).10.1016/S0010-938X(02)00185-3 ↗
29. M. Itagaki, H. Yoichi, W. Kunihiro, H. Takashi, and M. Kenji, Corros. Eng. 53, 329 (2004).10.3323/jcorr1991.53.329 ↗
30. M.J. Munoz-Portero, J. García-Antón, J.L. Guiñón, and V. Pérez-Herranz, Corrosion 61, 464 (2005).10.5006/1.3280646 ↗
31. M.T. Montanes, V. Pérez-Herranz, J. García-Antón, and J.L. Guiñón, Corrosion 62, 64 (2006).10.5006/1.3278253 ↗