journal article·2015-03

Printability and Electrical Conductivity of UV Curable MWCNT Ink

Ada Ortega, Byungwoo Park, Nam Soo Kim

Journal of Electronic Materials· Volume 44· Issue 3
Publisher page

Abstract

Composites reinforced with multiwalled carbon nanotubes (MWCNT) in a photosensitive acrylic matrix were successfully synthesized and their printing, rheological, and electrical behavior was characterized. The shape of the reinforcement MWCNT particles was analyzed by transmission electron microscopy. The MWCNT were mixed in the acrylic polymer at increasing concentrations until the percolation threshold was determined at 2 wt.% with a conductivity of 4.26 × 10−4 S/cm. The large increase in viscosity with addition of MWCNT showed the need for a printing system capable of dispensing solutions of up to 613 × 103 cp. Lines were printed with a precision dispensing system mounted in computer controlled x–y–z stages, while an integrated ultraviolet light emission diode dot with a single wavelength of 385 nm cured seconds after the ink was dispensed. The wetting properties of the composite with respect to polyester, polyethylene terephthalate, polyimide, and paper films were analyzed with a goniometer. The relationship between the contact angle, pattern accuracy, and electrical conductivity was determined for each substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Y. Iwahoria, S. Ishiwatab, T. Sumizawab, and T. Ishikawa, Compos. A 36, 1430 (2005).10.1016/j.compositesa.2004.11.017 ↗
2. H. Lorenza, J. Fritzschea, A. Dasb, K.W. Stöckelhuberb, R. Jurkb, G. Heinrichb, and M. Klüppel, Compos. Sci. Technol. 69, 2135 (2009).10.1016/j.compscitech.2009.05.014 ↗
3. F. Bauer, R. Flyunt, K. Czihal, H. Ernst, S. Naumov, and␣M.R. Buchmeiser, Nucl. Instr. Methods B 265, 87 (2007).10.1016/j.nimb.2007.08.030 ↗
4. R. Halliday, Key Benefits of Next-Gen UV LED Technology (Lumex Creating LED and LCD Solutions Together, 2010), http://www.lumex.com/en/tech-notes/article/key_benefits_of_ next-gen_uv-led_tech/ . Accessed 29 July 2010.
5. Z. Doğruyol, G. Temel, S.K. Doğruyol, Ö. Pekcan, and N. Arsu, Prog. Org. Coat. 76, 944 (2013).10.1016/j.porgcoat.2012.10.013 ↗
6. Z. Ranjbara, A. Jannesari, S. Rastegar, and Sh. Montazeri, Prog. Org. Coat. 66, 372 (2009).10.1016/j.porgcoat.2009.08.007 ↗
7. Y.Y. Huang and E.M. Terentjev, Polymers 4, 275 (2012).10.3390/polym4010275 ↗
8. N.S. Kim and K.N. Han, J. Appl. Phys. 108, 102801 (2010).10.1063/1.3510359 ↗
9. J. Hoffman, S.Y. Hwang, A. Ortega, N.S. Kim, and K.S. Moon, J. Electron. Packag. 135, 011006 (2013).10.1115/1.4023809 ↗
10. J. Daniel, Printed Electronics: Technologies, Challenges and Application (International Workshop on Flexible and Printed Electronics, 2010), http://www.parc.com/publication/ 2566/printed-electronics.html . Accessed 8–10 September 2010.
11. M. Vlasea and E. Toyserkani, J. Mater. Process. Technol. 213, 1970 (2013).10.1016/j.jmatprotec.2013.05.011 ↗
12. K.K.B. Han, L. Li, and I.M. Hutchings, CIRP Ann. Manuf. Technol. 57, 601 (2008).10.1016/j.cirp.2008.09.006 ↗
13. M.A. Mcleod and D.G. Baird, Compos. B. 30, 297 (1999).10.1016/S1359-8368(98)00061-4 ↗
14. S. Yang and J.R.G. Evans, Powder Technol. 178, 56 (2007).10.1016/j.powtec.2007.04.004 ↗