journal article·2014-12

Effect of Board Thickness on Sn-Ag-Cu Joint Interconnect Mechanical Shock Performance

Tae-Kyu Lee, Weidong Xie

Journal of Electronic Materials· Volume 43· Issue 12
Publisher page

Abstract

The mechanical stability of solder joints with Sn-Ag-Cu alloy joints on various board thicknesses was investigated with a high G level shock environment. A test vehicle with three different board thicknesses was used for board drop shock performance tests. These vehicles have three different strain and shock level condition couples per board, and are used to identify the joint stability and failure modes based on the board responses. The results revealed that joint stability is sensitive to board thickness. The board drop shock test showed that the first failure location shifts from the corner location near the standoff to the center with increased board thickness due to the shock wave response. From analysis of the thickness variation and failure cycle number, the strain rate during the pulse strain cycle is the dominant factor, which defines the life cycle number per board thickness, and not the maximum strain value. The failure location shift and the shock performance differentiation are discussed from the perspective of maximum principal strain, cycle frequency and strain rate per cycle.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. J. Glazer, Int. Mater. Rev. 40, 65 (1995).10.1179/imr.1995.40.2.65 ↗
2. H.K. Kim and K.N. Tu, Phys. Rev. B 53, 16027 (1996).10.1103/PhysRevB.53.16027 ↗
3. P. Lall, R. Lowe, and K. Goebel, IEEE 60th Electronic Components and Technology Conference (ECTC) (Las Vegas, NV, June 2010), p. 889.10.1109/ECTC.2010.5490691 ↗
4. W. Pengand and M.E. Marques, J. Electron. Mater. 36, 1679 (2007).10.1007/s11664-007-0260-z ↗
5. B. Noh, J. Yoon, S. Ha, and S. Jung, J. Electron. Mater. 40, 224 (2011).10.1007/s11664-010-1423-x ↗
6. L. Zhu and W. Marcinkiewicz, IEEE Trans. Compon. Packag. Technol. 28, 449 (2005).10.1109/TCAPT.2005.853591 ↗
7. G. Godbole, B. Roggeman, P. Borgesen, and K. Srihari, IEEE 59th Electronic Components and Technology Conference (ECTC) (San Diego, CA, June 2010).
8. H. Ma, T.-K. Lee, D.H. Kim, H.G. Park, S.H. Kim, and K.-C. Liu, Compon. IEEE Trans. Packag. Manuf. Technol. 1, 714 (2011).10.1109/TCPMT.2011.2118757 ↗
9. T.-K. Lee, B. Zhou, T. Bieler, and K.-C. Liu, J. Electron. Mater. 41, 273 (2012).10.1007/s11664-011-1775-x ↗