journal article·2013-01

Transformation-Induced Plasticity in Sn-In Solder Joints

K.-O. Lee, J.W. Morris, Fay Hua

Journal of Electronic Materials· Volume 42· Issue 1
Publisher page

Abstract

The research reported here concerns the contribution of transformation- induced plasticity (TRIP) to the shear deformation of Sn-x wt.%In solders with Cu or Ni metallization, where the In content (x) ranges from 9 wt.% to 15 wt.%. In this concentration range the high-temperature γ-phase (hexagonal structure) transforms to the low-temperature β-phase (β-Sn structure) on cooling, and the transformation can be martensitic. The results show that Sn-9In and Sn-11In solder joints do exhibit TRIP that significantly enhances their ductility when tested at temperatures between the deformation-induced martensite temperature (Md) and the stress-induced martensite temperature (My). For Sn-9In, Md ≈ 105°C, and the TRIP effect is optimal near My ≈ 80°C, where the total elongation reaches ~100% when the substrate metallization is Cu. The TRIP elongation is less spectacular with Ni metallization because of weakness at the solder–substrate interface. Sn-11 wt.%In joints also show extensive TRIP effect, with an Md temperature near 60°C, and an My of 35°C or less. The total elongation of 11 wt.% In joints on Cu reaches 350% at 35°C. Sn-15 wt.%In joints with Cu metallization also have excellent ductility at low temperature, with total elongation of ~50% at 35°C. In this case, however, the excellent ductility is due to the fine-grained, two-phase microstructure of the solder rather than any TRIP effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. J.W. Morris Jr., J.L. Freer Goldstein, and Z. Mei, JOM 45, 25 (1993).10.1007/BF03222376 ↗
2. Y. Koyama, H. Suzuki, and O. Nittono, Scr. Metall. 18, 715 (1984).10.1016/0036-9748(84)90326-0 ↗
3. T.B. Massalski, Binary Alloy Phase Diagrams (Materials Park: American Society for Metals, 1987).
4. G.V. Raynor and J.A. Lee, Acta Met. 2, 616 (1954).10.1016/0001-6160(54)90197-2 ↗
5. Y. Koyama, T. Ukena, and O. Nittono, Trans. JIM 23, 518 (1982).10.2320/matertrans1960.23.518 ↗
6. Y. Koyama and O. Nittoon, Trans. JIM 23, 736 (1982).10.2320/matertrans1960.23.736 ↗
7. K.O. Lee, J.W. Morris Jr., and F. Hua, J. Electron. Mater. 41, 336 (2012).10.1007/s11664-011-1818-3 ↗
8. M.A. Meyers and K.K. Chawla, Mechanical Metallurgy (Englewood Cliffs: Prentice Hall, 1984), p. 467.
9. P. Xu and J.W. Morris Jr., Metall. Mater. Trans. A 27A, 1187 (1996).10.1007/BF02649857 ↗
10. S.J. Zaefferer, Appl. Cryst. 30, 10 (2000).10.1107/S0021889899010894 ↗
11. K.O. Lee, J.W. Morris Jr., and Fay. Hua, Metall. Mater. Trans. A 41A, 1805 (2010).10.1007/s11661-010-0214-6 ↗
12. K.O. Lee, J. Yu, T.S. Park, and S.B. Lee, J. Electron Mater. 33, 682 (2003).
13. M.N. Islam and Y.C. Chan, Mater. Sci. Eng. B 17, 246 (2005).10.1016/j.mseb.2004.11.027 ↗
14. F. Zhang, C.C. Chum, M. Li, and K.N. Tu, J. Mater. Res. 17, 2757 (2002).10.1557/JMR.2002.0397 ↗
15. Z. Mei and J.W. Morris Jr., J. Electron. Mater. 21, 401 (1992).10.1007/BF02660403 ↗