journal article·2009-06

Thermal Fatigue Endurance of Lead-Free Composite Solder Joints over a Temperature Range of −55°C to 150°C

Olli Nousiainen, Tero Kangasvieri, Risto Rautioaho, Jouko Vähäkangas

Journal of Electronic Materials· Volume 38· Issue 6
Publisher page

Abstract

The thermal fatigue endurance of two lead-free solder/plastic-core solder ball (PCSB) composite joint structures in low-temperature co-fired ceramic (LTCC) modules was investigated using a thermal cycling test over a temperature range of −55°C to 150°C. The investigated solder alloys were Sn-7In-4.1Ag-0.5Cu (SAC-In) and 95.5Sn-4Ag-0.5Cu (SAC). Three failure mechanisms were observed in the test joints. Transgranular (fatigue) cracking mixed with minor intergranular cracking was the dominant failure mechanism at the outer edge of the joints in both test assemblies, whereas separation of the solder/intermetallic compound (IMC) interface and creep cracking occurred in the other parts of the test joints. The propagation rate of the transgranular crack was lower in the SAC-In joints compared with in the SAC joints. Furthermore, the SAC solder seemed to be more prone to separation of the solder/IMC interface, and more severe intergranular (creep) cracking occurred in it compared with in the SAC-In solder. In the thermal cycling test conditions, the better thermal fatigue endurance of the SAC-In solder composite joints resulted in a 75% higher characteristic lifetime compared with the SAC composite joints.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. J. Heyen, T. Kerssenbrock, A. Chernyakov, P. Heide, and A.F. Jacob, IEEE Trans. Microw. Theory Tech. 51, 2589 (2003). doi: 10.1109/TMTT.2003.819210 .10.1109/TMTT.2003.819210 ↗
2. J-H. Lee, G. DeJean, S. Sarkar, S. Pinel, K. Lim, J. Papapolymerou, J. Laskar, and M.M. Tentzeris, IEEE Trans. Microw. Theory Tech. 53, 2220 (2005). doi: 10.1109/TMTT.2005.848777 .10.1109/TMTT.2005.848777 ↗
3. Y.C. Lee, W.-I. Chang, and C.S. Park, Proceedings of the 2005 IEEE MTT-S International Microwave Symposium (IEEE, 2005), pp. 1015–1018.
4. T. Kangasvieri, J. Halme, J. Vähäkangas, and M. Lahti, IEEE Microw. Wirel. Compon. Lett. 18, 34 (2008). doi: 10.1109/LMWC.2007.911986 .10.1109/LMWC.2007.911986 ↗
5. S. Nishigaki, U. Goebel, and W. Röthlingshöfer, Proceedings of the Ceramic Interconnect Technology (IMAPS, 2004), pp.␣231–237.
6. P.J. Olivier, Y. Wang, and C.R. Needes, www2.dupont.com/MCM/en_US/PDF/techpapers/ThermalCycledAdhesion_of_CofiredSolderedConductors_on_LTCC.pdf .
7. R. Ghaffarian, Microelectron. Reliab. 46, 2006 (2006). doi: 10.1016/j.microrel.2006.07.09410.1016/j.microrel.2006.07.094 ↗
8. Directive 2002/95/EC of the European Parliament and of the council of the 27 January 2003 on the restrictions of the use of certain hazardous substances in electrical and electronic equipment.
9. O. Nousiainen, J. Putaala, T. Kangasvieri, R. Rautioaho, and J. Vähäkangas, J. Electron. Mater. 35, 1857 (2006). doi: 10.1007/s11664-006-0168-z .10.1007/s11664-006-0168-z ↗
10. S.B. Park, R. Joshi, and L. Goldmann, Proceedings of the 54th Electronics Components and Technology Conference (IEEE, 2004), pp. 82–89.
11. M. Interrante, J. Coffin, M. Cole, I. De Sousa, M. Farooq, L. Goldmann, C. Goldsmith, J. Jozwiak, T. Lopez, G. Martin, V.T. Truong, and D. Welsh, Proceedings of the IEEE/CPTM/SEMI International Electronics Manufacturing Technology Symposium (IEEE, 2003), pp. 85–92.
12. S.B. Park and R. Joshi, Microelectron. Reliab. 48, 763 (2008). doi: 10.1016/j.microrel.2007.12.008 .10.1016/j.microrel.2007.12.008 ↗
13. S. Movva and G. Aguirre, Proceedings of the 54th Electronics Components and Technology Conference (IEEE, 2004), pp.␣1443–1448.
14. N. Okinaga, H. Kuroda, and Y. Nagai, Proceedings of the 51th Electronics Components and Technology Conference (IEEE, 2001), pp. 134–1349.
15. S.W. Yoon and I.S. Park, Proceedings of the Technical Program of Pan Pacific Microelectronics Symposium (SMTA, 2001), pp. 29–37.
16. M. Klein, H. Oppermann, S. Behnke, K. Hasler, R. Aschenbrenner, and H. Reichl, Proceedings of the IMAPS Nordic Conference (IMAPS, 2002), pp. 157–162.
17. D. Schwanke, T. Haas, C. Zeilmann, K. Halser, and M. Klein, Proceedings of the 14th Microelectronics and Packaging Conference (IMAPS, 2003), pp. 213–218.
18. Z. Wei and L.B. Kuan, Proceedings of the 5th Electronics Packaging Technology Conference (IEEE, 2003), pp. 701–706.
19. J. Galloway, A. Syed, W. Kang, J Kim, J. Cannis, Y. Ka, s. Kim, T. Kim, G. Lee, and S. Ryu, IEEE Trans. Compon. Pack. Technol. 28, 297 (2005). doi: 10.1109/TCAPT.2005.848504 .10.1109/TCAPT.2005.848504 ↗
20. 20. T. Kangasvieri, O. Nousiainen, J. Putaala, R. Rautioaho, and J. Vähäkangas, Microelectron. Reliab. 46, 1335 (2006). doi: 10.1016/j.microrel.2005.11.003 .10.1016/j.microrel.2005.11.003 ↗
21. O. Nousiainen, J. Putaala, T. Kangasvieri, R. Rautioaho, and J. Vähäkangas, J. Electron. Mater. 36, 232 (2007). doi: 10.1007/s11664-006-0066-4 .10.1007/s11664-006-0066-4 ↗
22. O. Nousiainen, T. Kangasvieri, R. Rautioaho, and J. Vähäkangas, Solder. Surf. Mt. Technol. 20/3, 11 (2008). doi: 10.1108/09540910810885679 .10.1108/09540910810885679 ↗
23. J.C. Suhling H.S. Gale, R.W. Johnson, M.N. Islam, T. Shete, P. Lall, M.J. Bozack, J.L. Evans, P. Seto, T. Gupta, and J.R Thompson, Solder. Surf. Mt. Technol. 16/2, 77 (2004). doi: 10.1108/09540910410537354 .10.1108/09540910410537354 ↗
24. JEDEC Standard No. 22-A104C (May 2005).
25. J. Semmens and L.W. Kessler, Proceedings of the 5th Annual IEEE International Reliability Physics Symposium (IEEE, 1997), pp. 141–148.
26. IPC Standard IPC-9701 (January 2002).
27. A. Sharif and Y.C Chan, J. Alloys Compd. 390, 67 (2005). doi: 10.1016/j.jallcom.2004.08.023 .10.1016/j.jallcom.2004.08.023 ↗
28. A. Sharif and Y.C Chan, Thin Solid Films 504, 431 (2006). doi: 10.1016/j.tsf.2005.09.061 .10.1016/j.tsf.2005.09.061 ↗
29. T-M. Korhonen, J.K. Kivilahti, J. Electron. Mater. 27, 149 (1998). doi: 10.1007/s11664-998-0205-1 .10.1007/s11664-998-0205-1 ↗
30. J-M. Song, Z-M. Wu, and D-A. Huang, Scr. Mater. 56, 413 (2007). doi: 10.1016/j.scriptamat.2006.10.044 .10.1016/j.scriptamat.2006.10.044 ↗
31. K-S. Kim, T. Imanishi, K. Suganuma, M. Ueshima, and R. Kato, Microelectron. Reliab. 47, 1113 (2007). doi: 10.1016/j.microrel.2006.06.012 .10.1016/j.microrel.2006.06.012 ↗
32. M. Hansen, Constitution of Binary Alloys (New York, USA: McGraw-Hill Book Company Inc.,1958).
33. S. Terashima, Y Kariya, T. Hosoi, and M. Tanaka, J. Electron. Mater. 32, 1527 (2003). doi: 10.1007/s11664-003-0125-z .10.1007/s11664-003-0125-z ↗
34. T. Chen and I. Dutta, J. Electron. Mater. 37, 347 (2008). doi: 10.1007/s11664-007-0340-0 .10.1007/s11664-007-0340-0 ↗
35. M. Reid, J. Punch, M. Collins, and C. Ryan, Solder. Surf. Mt. Technol. 20/4, 3 (2008). doi: 10.1108/09540910810902651 .10.1108/09540910810902651 ↗
36. J.J. Sundelin, S.T. Nurmi, and T.K. Lepistö, Mater. Sci. Eng. A 474, 201 (2008). doi: 10.1016/j.msea.2007.04.013 .10.1016/j.msea.2007.04.013 ↗
37. O. Nousiainen, T. Kangasvieri, K.Kautio, R. Rautioaho, and J. Vähäkangas, Solder. Surf. Mt. Technol. 19/3, 15 (2007). doi: 10.1108/09540910710843748 .10.1108/09540910710843748 ↗
38. O. Nousiainen, T. Kangasvieri, R. Rautioaho, and J. Vähäkangas, Unpublished paper.
39. J. Putaala, T. Kangasvieri, O. Nousiainen, H. Jantunen, and M. Moilanen, IEEE Trans. Electron. Packag. Manuf. 31, 240 (2008). doi: 10.1109/TEPM.2008.926289 .10.1109/TEPM.2008.926289 ↗
40. O. Nousiainen, L. Lehtiniemi. T. Kangasvieri, R. Rautioaho, and J. Vähäkangas, Microelectron. Reliab. 48, 622 (2008). doi: 10.1016/j.microrel.2007.11.001 .10.1016/j.microrel.2007.11.001 ↗
41. J.S. Hwang, Environment-friendly electronics: Lead-free technology, (Port Erin, UK: Electrochemical Publications, 2001).
42. S. Terashima, K. Takahama, M. Nozaki, and M. Tanaka, Mater. Trans. 45, 1383 (2004). doi: 10.2320/matertrans.45.138310.2320/matertrans.45.1383 ↗
43. D.W. Hendersson, J.J. Woods,T.A. Gosselin, J. Bartelo, D.E. King, T.M. Korhonen, M.A. Korhonen, L.P. Lehman, E.J. Cotts, S.K. Kang, P. Lauro, D-Y. Shih, C. Goldsmith, and K.J. Puttlitz, J. Mater. Res. 19, 1608 (2004). doi: 10.1557/JMR.2004.0222 .10.1557/JMR.2004.0222 ↗
44. T.T. Mattila, V. Vuorinen, and J.K. Kivilahti, J. Mater. Res. 19, 3214 (2004). doi: 10.1557/JMR.2004.0436 .10.1557/JMR.2004.0436 ↗
45. I. Dutta, D. Pan, R.A. Marks, and S.G. Jadhav, Mater. Sci. Eng. A 410-411, 48 (2005). doi: 10.1016/j.msea.2005.08.142 .10.1016/j.msea.2005.08.142 ↗
46. A. Schubert, R. Dudek, R. Döring, H. Walter, E. Auerswald, A. Gollhardt, and B. Michel, Proceedings of the 8th International Symposium on Advanced Packaging Materials (IEEE, 2002), pp. 90–96.10.1109/ISAPM.2002.990369 ↗