Room Temperature Synthesis of Transparent and Conducting Indium Tin Oxide Films with High Mobility and Figure of Merit by RF-Magnetron Sputtering
Source abstract
Abstract
Tin doped indium oxide (ITO) films with high conductivity and charge carrier mobility were deposited at room temperature using RF-magnetron sputtering, without any post annealing treatment. It is observed that structural, optical, morphological and electrical properties of these ITO films depend on deposition time. All the synthesized films show optical transmittance > 90% and band gap of ∼ 3.6 eV. A change in crystal orientation from (222) to (400) with slight shift of peaks toward lower 2θ has been observed with the increase in deposition time. The synthesized films are compact, uniform and free from cracks. Moreover, there was an increase in grain size and shape with the progress in deposition time. Synthesized ITO films with (400) orientation have high conductivity (∼ 2 × 103 Ω−1 cm−1), high charge carrier mobility (∼ 348 cm2 V−1 s−1) and a high figure of merit (104 × 10−3 Ω−1). The synthesized thin films can have prospective applications in opto-electronic devices such as solar cells, light emitting diodes, etc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. G. Liang, Y. Luo, J. Hu, X. Chen, Y. Zeng, Z. Su, J. Luo, and P. Fan, Surf. Coat. Technol. 358, 762 (2019).10.1016/j.surfcoat.2018.11.079 ↗
2. Y. Liu, J. Sun, H. Liu, and D. Seo, Liq. Cryst. (2018). https://doi.org/10.1080/02678292.2018.1554770 .10.1080/02678292.2018.1554770 ↗
3. M. Abdullah, M. Mamat, A. Ismail, M. Malek, A. Suriani, M. Ahmad, I. Banu, R. Amiruddin, and M. Rusop, Mater. Lett. 236, 460 (2019).10.1016/j.matlet.2018.10.163 ↗
4. B. Sahu, W. Long, and J. Han, ScriptaMaterialia 149, 98 (2018).
5. M. Misra, D. Hwang, Y. Kim, J. Myoung, and T. Lee, Ceram. Int. 44, 2927 (2018).10.1016/j.ceramint.2017.11.041 ↗
6. K. Pan, L. Lin, L. Chang, and H. Shih, Appl. Surf. Sci. 273, 12 (2013).10.1016/j.apsusc.2012.12.149 ↗
7. M. Socol, N. Preda, O. Rasoga, A. Costas, A. Stanculescu, C. Breazu, F. Gherendi, and G. Socol, Coatings 9, 19 (2019).10.3390/coatings9010019 ↗
8. H. Nishinaka and M. Yoshimoto, Cryst. Growth Des. 18, 4022 (2018).10.1021/acs.cgd.8b00387 ↗
9. H. Salami, A. Uy, A. Vadapalli, C. Grob, V. Dwivedi, and R. Adomaitis, J. Vac. Sci. Technol. A 37, 010905 (2019).10.1116/1.5058171 ↗
10. V. Brinzari, I. Damaskin, L. Trakhtenberg, B.K. Cho, and G. Korotcenkov, Thin Solid Films 552, 225 (2014).10.1016/j.tsf.2013.12.009 ↗
11. M. Thirumoorthia and J. Thomas Joseph Prakash, J. Asian Ceram. Soc. 4, 124 (2016).10.1016/j.jascer.2016.01.001 ↗
12. M. Tsai, C. Wang, and M. Hon, Surf. Coat. Technol. 172, 95 (2003).10.1016/S0257-8972(03)00314-1 ↗
13. H. Kobayashi, T. Ishida, K. Nakamura, Y. Nakato, and H. Tsubomura, J. Appl. Phys. 72, 5288 (1992).10.1063/1.352013 ↗
14. R. Eason, Pulsed Laser Deposition of Thin Films (Hoboken: Wiley, 2007), p. 240.10.1002/0470052120 ↗
15. P.R. Willmott and J.R. Huber, Rev. Mod. Phys. 72, 315 (2000).10.1103/RevModPhys.72.315 ↗
16. P.S. Patil, Mater. Chem. Phys. 59, 185 (1999).10.1016/S0254-0584(99)00049-8 ↗
17. M. Fujimoto, T. Urano, S. Murai, and Y. Nishi, Jpn. J. Appl. Phys. 28, 2587 (1989).10.1143/JJAP.28.2587 ↗
18. G. Korotcenkov and B.K. Cho, Prog. Cryst. Growth Charact. Mater. 63, 1 (2017).10.1016/j.pcrysgrow.2016.12.001 ↗
19. A. Jadhavar, A. Bhorde, V. Waman, A. Funde, A. Pawbake, R. Waykar, D. Patil, and S. Jadkar, Eng. Sci. Int. Res. J. 3, 126 (2015).
20. J. Tauc, Mater. Res. Bull. 3, 37–46 (1968).10.1016/0025-5408(68)90023-8 ↗
21. R. Swanepoel, J. Phys. E 16, 1214 (1983).10.1088/0022-3735/16/12/023 ↗
22. F. Gu, R. Nie, Z. Tian, D. Han, and Z. Wang, RSC Adv. 5, 99018 (2015).10.1039/C5RA19525J ↗
23. M.K. Trivedi, R.M. Tallapragada, A. Branton, D. Trivedi, G. Nayak, O. Latiyal, and S. Jana, Ind. Eng. Manag. 4, 1000177 (2015).
24. B.D. Cullity and S.R. Stock, Elements of X-ray Diffraction (Upper Saddle River: Prentice Hall, 2011).
25. R. Yogamalar, R. Srinivasan, A. Vinu, K. Ariga, and A.C. Bose, Solid State Commun. 149, 1919 (2009).10.1016/j.ssc.2009.07.043 ↗
26. A.K. Zak, W.H.A. Majid, M.E. Abrishami, and R. Yousefi, Solid State Sci. 13, 251256 (2011).
27. A. Zak, W. Majid, M. Abrishami, and R. Yousefi, Solid State Sci. 13, 251 (2011).10.1016/j.solidstatesciences.2010.11.024 ↗
28. M. Birkholz, J. Appl. Cryst. 143 (2006).
29. T.M. Hammad, Phys. Status Solidi A 206, 2128 (2009).10.1002/pssa.200881781 ↗
30. G. Haacke, J. Appl. Phys. 47, 4086 (1976).10.1063/1.323240 ↗
31. D.B. Fraser and H.D. Cook, J. Electrochem. Soc. 119, 1368 (1972).10.1149/1.2403999 ↗
32. K.N. Tonny, R. Rafique, A. Sharmin, M. Bashar, and Z. Mahmood, AIP Adv. 8, 065307 (2018).10.1063/1.5023020 ↗