journal article·2019-05

Aqueous Chemical Synthesis and Consolidation of Size-Controlled Bi2Te3 Nanoparticles for Low-Cost and High-Performance Thermoelectric Materials

Tatsuichiro Nakamoto, Shun Yokoyama, Tomohisa Takamatsu, Koichi Harata, Kenichi Motomiya, Hideyuki Takahashi, Yuzuru Miyazaki, Kazuyuki Tohji

Journal of Electronic Materials· Volume 48· Issue 5
Publisher page

Abstract

Bi2Te3 nanoparticles (NPs) were synthesized with controlled mean diameters of 58 nm, 82 nm, and 100 nm using an aqueous chemical reduction, in which ascorbic acid was used instead of the commonly employed toxic reducing agent. In general, organic capping agents remained on the Bi2Te3 NP surfaces, which prevented the sintering of Bi2Te3 NPs and affected their thermoelectric properties. Not only the capping agent, but also water from the synthesis process, remained on the Bi2Te3 NPs even after their consolidation by spark plasma sintering. Consequently, evaporation of the water led to the collapse of sintered Bi2Te3 NPs when heated above 100°C. After the complete removal of the surface impurities and water, the sintered Bi2Te3 NPs became stable. To achieve enhanced thermoelectric properties, a high relative density of ∼ 96% was achieved in the sintered Bi2Te3 NPs without large grain growth by optimizing the sintering temperature and holding time. Subsequently, their thermoelectric properties showed that zT of the sintered Bi2Te3 NPs 100 nm in size is higher (0.41 at 390 K) than those of smaller sizes (58 nm and 82 nm). Finally, the effect of grain size, particle size and density on their thermoelectric properties is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. L.E. Bell, Science 321, 1457 (2008).10.1126/science.1158899 ↗
2. M. Scheele, N. Oeschler, K. Meier, A. Kornowski, C. Klinke, and H. Weller, Adv. Funct. Mater. 19, 3476 (2009).10.1002/adfm.200901261 ↗
3. M. Saleemi, M.S. Toprak, S.H. Li, M. Johnsson, and M. Muhammed, J. Mater. Chem. 22, 725 (2012).10.1039/C1JM13880D ↗
4. Y. Min, J.W. Roh, H. Yang, M. Park, S.I. Kim, S. Hwang, S.M. Lee, K.H. Lee, and U. Jeong, Adv. Mater. 25, 1425 (2013).10.1002/adma.201203764 ↗
5. H.L. Cao, R. Venkatasubramanian, C. Liu, J. Pierce, H.R. Yang, M.Z. Hasan, Y. Wu, and Y.P. Chen, Appl. Phys. Lett. 101, 162104 (2012).
6. N. Watanabe, J. Kawamata, and N. Toshima, Chem. Lett. 33, 1368 (2004).10.1246/cl.2004.1368 ↗
7. Y. Xu, Z. Ren, W. Ren, G. Cao, K. Deng, and Y. Zhong, Mater. Lett. 62, 4273 (2008).10.1016/j.matlet.2008.06.055 ↗
8. J.P. Fu, S.Y. Song, X.G. Zhang, F. Cao, L. Zhou, X.Y. Li, and H.J. Zhang, CrystEngComm 14, 2159 (2012).10.1039/c2ce06348d ↗
9. M. Salavati-Niasari, M. Bazarganipour, and F. Davar, J. Alloys Compd. 489, 530 (2010).10.1016/j.jallcom.2009.09.101 ↗
10. X.B. Zhao, X.H. Ji, Y.H. Zhang, G.S. Cao, and J.P. Tu, Appl. Phys. Mater. 80, 1567 (2005).10.1007/s00339-004-2956-8 ↗
11. H.J. Kim, M.K. Han, H.Y. Kim, W. Lee, and S.J. Kim, B Kor. Chem. Soc. 33, 3977 (2012).10.5012/bkcs.2012.33.12.3977 ↗
12. Y.H. Zhang, G.Y. Xu, P. Ren, Z. Wang, and C.C. Ge, J. Electron. Mater. 40, 835 (2011).10.1007/s11664-011-1588-y ↗
13. T. Sun, X.B. Zhao, T.J. Zhu, and J.P. Tu, Mater. Lett. 60, 2534 (2006).10.1016/j.matlet.2006.01.033 ↗
14. C. Kim, D.H. Kim, Y.S. Han, J.S. Chung, S. Park, and H. Kim, Powder Technol. 214, 463 (2011).10.1016/j.powtec.2011.08.049 ↗
15. A. Purkayastha, F. Lupo, S. Kim, T. Borca-Tasciuc, and G. Ramanath, Adv. Mater. 18, 496 (2006).10.1002/adma.200501339 ↗
16. L.N. Zhou, X.B. Zhang, X.B. Zhao, T.J. Zhu, and Y.Q. Qin, J. Mater. Sci. 44, 3528 (2009).10.1007/s10853-009-3476-x ↗
17. W. Wang, J. Goebl, L. He, S. Aloni, Y. Hu, L. Zhen, and Y. Yin, J. Am. Chem. Soc. 132, 17316 (2010).10.1021/ja108186w ↗
18. X. Ji, B. Zhang, T.M. Tritt, J.W. Kolis, and A. Kumbhar, J. Electron. Mater. 36, 721 (2007).10.1007/s11664-007-0156-y ↗
19. U. Pelz, K. Kaspar, S. Schmidt, M. Dold, M. Jagle, A. Pfaadt, and H. Hillebrecht, J. Electron. Mater. 41, 1851 (2012).10.1007/s11664-012-2099-1 ↗
20. P. Dharmaiah, C.H. Lee, B. Madavali, and S.J. Hong, Arch. Metall. Mater. 62, 1005 (2017).10.1515/amm-2017-0142 ↗
21. S. Pradhan, R. Das, R. Bhar, R. Bandyopadhyay, and P. Pramanik, J. Nanoparticle Res. 19, 69 (2017).
22. V.R. Akshay, M.V. Suneesh, and M. Vasundhara, Inorg. Chem. 56, 6264 (2017).10.1021/acs.inorgchem.7b00336 ↗
23. N. Mntungwa, P.V.S.R. Rajasekhar, K. Ramasamy, and N. Revaprasadu, Superlattice Microst 69, 226 (2014).10.1016/j.spmi.2014.02.021 ↗
24. F. Wu, H.Z. Song, F. Gao, W.Y. Shi, J.F. Jia, and X. Hu, J. Electron. Mater. 42, 1140 (2013).10.1007/s11664-013-2541-z ↗
25. Y. Li, Q. Zhao, Y.G. Wang, and K. Bi, Mater. Sci. Semicond. Proc. 14, 219 (2011).10.1016/j.mssp.2011.02.019 ↗
26. Q. Zhao and Y.G. Wang, J. Alloys Compd. 497, 57 (2010).10.1016/j.jallcom.2010.03.077 ↗
27. W. Guo, J.M. Ma, and W.J. Zheng, J. Alloys Compd. 659, 170 (2016).10.1016/j.jallcom.2015.10.228 ↗
28. R.C. Jin, J.S. Liu, and G.H. Li, Cryst. Res. Technol. 49, 460 (2014).10.1002/crat.201400012 ↗
29. P. Srivastava and K. Singh, J. Therm. Anal. Calorim. 110, 523 (2012).10.1007/s10973-012-2553-6 ↗
30. H. Mamur, M.R.A. Bhuiyan, F. Korkmaz, and M. Nil, Renew. Sust. Energy Rev. 82, 4159 (2018).10.1016/j.rser.2017.10.112 ↗
31. S. Yokoyama, K. Sato, M. Muramatsu, T. Yamasuge, T. Itoh, K. Motomiya, H. Takahashi, and K. Tohji, Adv. Powder Technol. 26, 789 (2015).10.1016/j.apt.2015.02.002 ↗
32. M.E. Anderson, S.S.N. Bharadwaja, and R.E. Schaak, J. Mater. Chem. 20, 8362 (2010).10.1039/c0jm01424a ↗
33. M. Takashiri, K. Miyazaki, S. Tanaka, J. Kurosaki, D. Nagai, and H. Tsukamoto, J. Appl. Phys. 104, 084302 (2008).
34. M.R. Dirmyer, J. Martin, G.S. Nolas, A. Sen, and J.V. Badding, Small 5, 933 (2009).10.1002/smll.200801206 ↗
35. M. Takashiri, S. Tanaka, H. Hagino, and K. Miyazaki, J. Appl. Phys. 112, 084315 (2012).
36. Z.G. Zeng, P.H. Yang, and Z.Y. Hu, Appl. Surf. Sci. 268, 472 (2013).10.1016/j.apsusc.2012.12.134 ↗
37. Q.M. Liu, D.B. Zhou, K. Nishio, R. Ichino, and M. Okido, Mater. Trans. 51, 1386 (2010).10.2320/matertrans.M2010067 ↗
38. R. Drissi-Daoudi, A. Irhzo, and A. Darchen, J. Appl. Electrochem. 33, 339 (2003).10.1023/A:1024191404595 ↗
39. V.J.S.S.P.J. Reddy, 28th International Symposium on Shock Waves (2012).
40. J. Xiong, Y. Wang, Q.J. Xue, and X.D. Wu, Green Chem. 13, 900 (2011).10.1039/c0gc00772b ↗
41. S.H. Xuan, L.Y. Hao, W.Q. Jiang, X.L. Gong, Y.A. Hu, and Z.Y. Chen, J. Magn. Magn. Mater. 308, 210 (2007).10.1016/j.jmmm.2006.05.017 ↗
42. J.C. Deutsch, J. Chromatogr. A 881, 299 (2000).10.1016/S0021-9673(00)00166-7 ↗
43. S. Yokoyama, K. Motomiya, H. Takahashi, and K. Tohji, J. Mater. Chem. C 4, 7494 (2016).10.1039/C6TC02280D ↗
44. S. Lerdkanchanaporn, D. Dollimore, and K.S. Alexander, J. Therm. Anal. 49, 887 (1997).10.1007/BF01996774 ↗
45. D.D. Wagman, W.H. Evans, V.B. Parker, R.H. Schumm, I. Halow, S.M. Bailey, K.L. Churney, and R.L. Nuttall, J. Phys. Chem. Ref. Data 11, 1 (1982).10.1063/1.555661 ↗
46. E.M. Kosower, J. Am. Chem. Soc. 80, 3253 (1958).10.1021/ja01546a020 ↗
47. A. Seidell and W.F. Linke, Solubilities of inorganic and metal organic compounds; a compilation of quantitative solubility data from the periodical literature, 3rd ed. (New York: D. Van Nostrand Company, Inc., 1940).
48. A. Shalmashi and A. Eliassi, J. Chem. Eng. Data 53, 1332 (2008).10.1021/je800056h ↗
49. J.S. Son, M.K. Choi, M.K. Han, K. Park, J.Y. Kim, S.J. Lim, M. Oh, Y. Kuk, C. Park, S.J. Kim, and T. Hyeon, Nano Lett. 12, 640 (2012).10.1021/nl203389x ↗
50. L. Han, S.H. Spangsdorf, N.V. Nong, L.T. Hung, Y.B. Zhang, H.N. Pham, Y.Z. Chen, A. Roch, L. Stepien, and N. Pryds, Rsc. Adv. 6, 59565 (2016).10.1039/C6RA06688G ↗
51. S. Diouf and A. Molinari, Powder Technol. 221, 220 (2012).10.1016/j.powtec.2012.01.005 ↗
52. N.J. Shaw, Powder Metall. Int. 21, 16 (1989).
53. R. Chaim and M. Margulis, Mater. Sci. Eng. Struct. 407, 180 (2005).10.1016/j.msea.2005.07.024 ↗
54. S.S. Lim, J.H. Kim, B. Kwon, S.K. Kim, H.H. Park, K.S. Lee, J.M. Baik, W.J. Choi, D.I. Kim, D.B. Hyun, J.S. Kim, and S.H. Baek, J. Alloys Compd. 678, 396 (2016).10.1016/j.jallcom.2016.03.284 ↗
55. A. Soni, Y.Y. Zhao, L.G. Yu, M.K.K. Aik, M.S. Dresselhaus, and Q.H. Xiong, Nano Lett. 12, 1203 (2012).10.1021/nl2034859 ↗
56. Q.H. Zhang, X. Ai, L.J. Wang, Y.X. Chang, W. Luo, W. Jiang, and L.D. Chen, Adv. Func. Mater. 25, 966 (2015).10.1002/adfm.201402663 ↗
57. D.L. Medlin and G.J. Snyder, Curr. Opin. Colloid Interface Sci. 14, 226 (2009).10.1016/j.cocis.2009.05.001 ↗
58. J.P. Fleurial, L. Gailliard, R. Triboulet, H. Scherrer, and S. Scherrer, J. Phys. Chem. Solids 49, 1237 (1988).10.1016/0022-3697(88)90182-5 ↗