journal article·2012-06

Metal-Matrix Nanocomposites with Tailored Coefficients of Thermal Expansion for Improved Thermomechanical Reliability

J. E. Trujillo, J. W. Kim, E. H. Lan, S. Sharratt, Y. S. Ju, B. Dunn

Journal of Electronic Materials· Volume 41· Issue 6
Publisher page

Abstract

Ensuring the thermomechanical reliability of various interfaces in thermoelectric (TE) devices during manufacture and operation is challenging, especially for those incorporating TE materials with small coefficients of thermal expansion (CTEs). In this paper, we describe our recent progress in the development of metal-matrix nanocomposites with tailorable CTEs, for use as electrodes or as interfacial bonding layers for creating segmented TE elements. The composites incorporate ceramic nanoscale fillers with isotropic negative thermal expansion (NTE) to effectively offset the high CTE of the metal phase. The NTE fillers, synthesized using a sol–gel route, were mixed with metal powders and hot pressed to yield nanocomposites having CTE values decreasing approximately linearly with filler volume fraction. Composites with 54/46 v/v Ag/zirconium tungstate (ZrW2O8) achieved average CTE of 7.2 ppm/K, with electrical and thermal conductivities approximately 50% of that of Ag nanopowders hot pressed under identical conditions. X-ray diffraction (XRD) analyses suggest that the composites are thermally stable at temperatures as high as 920 K. This research provides a foundation upon which to investigate alternative electrode and interface materials with tailored CTEs for achieving improved thermomechanical reliability of TE modules and other thermal and electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Expansion and Ionic Conductivity · Advanced Battery Materials and Technologies · Thermodynamic and Structural Properties of Metals and Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. V. Ravi, S. Firdosy, T. Caillat, E. Brandon, K.V.D. Walde, L. Maricic, and A. Sayir, J. Electron. Mater. 38, 1433 (2009) and related erratum in J. Electron. Mater. 40, 1334 (2011).
2. Y.S. Ju and U. Ghoshal, J. Appl. Phys. 88, 4135 (2000).10.1063/1.1289776 ↗
3. H. Lange, Phys. Status Solidi B 201, 3 (1997).10.1002/1521-3951(199705)201:1<3::AID-PSSB3>3.0.CO;2-W ↗
4. K. Herz, M. Powalla, and A. Eicke, Phys. Status Solidi A 145, 415 (1994).10.1002/pssa.2211450223 ↗
5. E. Muller, C. Drasar, J. Schliz, and W.A. Kaysser, Mater. Sci. Eng. A-Struct. 362, 17 (2003).10.1016/S0921-5093(03)00581-1 ↗
6. S.K. Thakur, B.K. Dhindaw, N. Hort, and K.U. Kainer, Metall. Mater. Trans. A 35A, 1167 (2004).10.1007/s11661-004-1020-9 ↗
7. Y. Oguni, T. Iida, A. Matsumoto, T. Nemoto, J. Onosaka, H. Takaniwa, T. Sagamoto, D. Mori, M. Akasaka, J. Sato, T. Nakajima, K. Nishio, and Y. Takanashi, Materials Research Society Symposium Proceedings, Boston, MA, Vol. 1044, ed. T.P. Hogan, J. Yang, R. Funahashi, and T. Tritt (Materials Research Society, 2007), 1044-U09-16.
8. G.D. Barrera, J.A.O. Bruno, T.H.K. Barron, and N.L. Allan, J. Phys.: Condens. Mater. 17, R217 (2005).10.1088/0953-8984/17/4/R03 ↗
9. J.S.O. Evans, T.A. Mary, T. Vogt, M.A. Subramanian, and A.W. Sleight, Chem. Mater. 8, 2809 (1996).10.1021/cm9602959 ↗
10. T.A. Mary, J.S.O. Evans, T. Vogt, and A.W. Sleight, Science 272, 90 (1996).10.1126/science.272.5258.90 ↗
11. A.W. Sleight, Annu. Rev. Mater. Sci. 28, 29 (1998).10.1146/annurev.matsci.28.1.29 ↗
12. D.K. Balch and D.C. Dunand, Metall. Mater. Trans. A 35A, 1159 (2004).10.1007/s11661-004-1019-2 ↗
13. A.K. Arora, V.S. Sastry, P.C. Sahu, and T.A. Mary, J. Phys.: Condens. Mater. 16, 1025 (2004).10.1088/0953-8984/16/7/002 ↗
14. P. Lommens, C.D. Meyer, E. Bruneel, K.D. Buyseer, I.V. Driessche, and S. Hoste, J. Eur. Ceram. Soc. 25, 3605 (2005).10.1016/j.jeurceramsoc.2004.09.015 ↗
15. R. Asthana, Adv. Perform. Mater. 5, 213 (1998).10.1023/A:1008634531980 ↗
16. V. Jayaseelan, K. Kalaichelvan, M. Kannan, and S.V. Ananth, Int. J. Appl. Eng. Res. 1, 194 (2010).
17. K. DeBuysser, P.F. Smet, B. Schoofs, E. Bruneel, D. Poelman, S. Hoste, and I.V. Driessche, J. Sol-Gel Sci. Technol. 43, 347 (2007).10.1007/s10971-007-1585-z ↗
18. H. Hiramatsu and F.E. Osterloh, Chem. Mater. 16, 2509 (2004).10.1021/cm049532v ↗
19. Y. Li, Y. Wu, and B.S. Ong, J. Am. Chem. Soc. 127, 3266 (2005).10.1021/ja043425k ↗
20. Y. Wu, Y. Li, and B.S. Ong, J. Am. Chem. Soc. 128, 4202 (2006).10.1021/ja058725w ↗
21. A. Mills, Heat Transfer, 1st ed. (Boston: Richard D. Irwin, Inc., 1992).
22. J.A. McCormack and J.-P. Fleurial, Materials Research Society Symposium Proceedings, ed. D.D. Allred, C.B. Vining, and G.A. Slack (Pittsburgh: Materials Research Society, 1991), p. 135.
23. T.J. Hendricks and J.A. Lustbader, International Conference on Thermoelectrics (CA: Long Beach, 2002).
24. H.A. Bruck and B.H. Rabin, J. Am. Ceram. Soc. 82, 2927 (1999).10.1111/j.1151-2916.1999.tb02182.x ↗