journal article·2010-01

Physical Properties of Sn96.5Ag3.5-Based Solders with Additions of Bi, Ge, and In

I. Kaban, K. Khalouk, M. Köhler, W. Hoyer, J.-G. Gasser

Journal of Electronic Materials· Volume 39· Issue 1
Publisher page

Abstract

The melting temperature, electrical resistivity, surface tension, and density of the (Sn0.965Ag0.035)95.17Bi4.83, (Sn0.965Ag0.035)95.17Bi4.73Ge0.1, and (Sn0.965Ag0.035)94-Bi2In4 alloys have been studied in comparison with the Sn60Pb40 and Sn96.5Ag3.5 binary alloys (all wt.%). The electrical conductivity of the solid alloys based on Sn96.5Ag3.5 is comparable to that of the Sn60Pb40 alloy. The wetting behavior on Cu and Ni surfaces has been investigated in a wide temperature interval. It is established that the addition of Bi to Sn96.5Ag3.5 decreases the surface tension and improves the wetting properties of the alloy. The addition of a small quantity of Ge to the Sn-Ag-Bi alloy did not improve the wetting behavior on either Cu or Ni surfaces. The wetting ability of the (Sn0.965Ag0.035)94Bi2In4 alloy was slightly worse as compared with (Sn0.965Ag0.035)95.17Bi4.83.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Thermodynamic and Structural Properties of Metals and Alloys · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. T.B. Massalski, J.L. Murray, K.H. Bennet, and H. Baker, Binary Alloy Phase Diagrams, Vol. 2 (Metals Park, OH: American Society for Metals, 1986), p. 1848.
2. D.R. Frear, J. Mater. Sci.: Mater. Electron. 18, 319 (2007).
3. Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, Official Journal of the European Union, 13.02.2003, L37/19; Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE), Official Journal of the European Union, 13.02.2003, L37/24
4. S. Mhiaoui (Ph.D. thesis, Université de Metz, 2007).
5. P.T. Vianco and J.A. Rejent, J. Electron. Mater. 28, 1138 (1999).10.1007/s11664-999-0251-3 ↗
6. K. Habu, N. Takeda, H. Watanabe, H. Ooki, J. Abe, T. Saito, Y. Taniguchi, and K. Takayama, 1st Int. Symp. on Environmentally Conscious Design and Inverse Manufacturing (Los Alamitos, CA: IEEE Computer Society, 1999), p. 606.10.1109/ECODIM.1999.747684 ↗
7. F. Sar and J.-G. Gasser, Intermetallics 11, 1369 (2003).10.1016/j.intermet.2003.09.007 ↗
8. D. Kreichgauer and W. Jaeger, Wied. Ann. 47, 513 (1892).10.1002/andp.18922831202 ↗
9. I. Kaban, S. Mhiaoui, W. Hoyer, and J.-G. Gasser, J. Phys.: Condens. Matter 17, 7867 (2005).10.1088/0953-8984/17/50/007 ↗
10. M.E. Brown, Introduction to Thermal Analysis: Techniques and Applications, 2nd ed. (Dordrecht, The Netherlands: Kluwer Academic, 2001).
11. G. Höhne, W. Hemminger, and H.-J. Flammersheim, Differential Scanning Calorimetry, 2nd ed. (Berlin: Springer, 2003).10.1007/978-3-662-06710-9 ↗
12. M. Köhler (Diploma thesis, Chemnitz University of Technology, 2008).
13. Y. Rotenberg, L. Boruvka, and A.W. Neumann, J. Colloid Interface Sci. 93, 169 (1983).10.1016/0021-9797(83)90396-X ↗
14. M. Bortolotti, M. Brugnara, C.D. Volpe, and S. Siboni, J. Colloid Interface Sci. 336, 285 (2009).10.1016/j.jcis.2009.03.055 ↗
15. Database for Solder Properties with Emphasis on New Lead-free Solders Release 4.0 (USA: National Institute of Standards & Technology and Colorado School of Mines); http://www.boulder.nist.gov/div853/lead_free/solders.html .
16. L.L. Meekisho and K. Nelson-Owusu, ASME J. Electron. Packag. 126, 52 (2004).10.1115/1.1646429 ↗
17. J.A.V. Butler, Proc. R. Soc. A 135, 348 (1932).10.1098/rspa.1932.0040 ↗
18. I.G. Kaban, S. Gruner, and W. Hoyer, Chemical Monthly (Monatshefte für Chemie) 136, 1823 (2005). doi: 10.1007/s00706-005-0378-8 .10.1007/s00706-005-0378-8 ↗
19. R. Novakovic, E. Ricci, D. Giuranno, and A. Passerone, Surf. Sci. 576, 175 (2005).10.1016/j.susc.2004.12.009 ↗
20. N. Kaiser, A. Cröll, F.R. Szofran, S.D. Cobb, and K.W. Benz, J. Cryst. Growth 231, 448 (2001).10.1016/S0022-0248(01)01480-4 ↗
21. I. Kaban, unpublished results
22. N. Eustathopoulos, N. Sobczak, A. Passerone, and K. Nogi, J. Mater. Sci. 40, 2271 (2005).10.1007/s10853-005-1945-4 ↗
23. J.N. Lalena, N.F. Dean, and M.W. Weiser, J. Electron. Mater. 31, 1244 (2002).10.1007/s11664-002-0016-8 ↗