Thermoelectric Properties and Conduction Mechanism of CaCu3Ti4O12 Ceramics at High Temperatures
Source abstract
Abstract
The Seebeck coefficient and electrical conductivity of CaCu3Ti4O12 (CCTO) ceramics were measured and analyzed in the high temperature range of 300°C to 800°C, and then the electrical conduction mechanism was investigated by using a combination of experimental data fitting and first-principles calculations. The Seebeck coefficient of the CCTO ceramic sintered at 1050°C is negative with largest absolute value of ∼650 μV/K at 300°C, and the electrical conductivity is 2–3 orders greater than the value reported previously by other researchers. With increasing sintering temperature, the Seebeck coefficient decreases while the electrical conductivity increases. The temperature dependence of the electrical conductivity follows the rule of adiabatic hopping conduction of small polarons. The calculated density of states of CCTO indicates that the conduction band is mainly contributed by the antibonding states of Cu 3d electrons, therefore small-polaron hopping between CuO4 square planar clusters was proposed. Possible ways to further improve the thermoelectric properties of CCTO are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Advanced Thermoelectric Materials and Devices · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. G. Mahan, B. Sales, and J. Sharp, Phys. Today 50, 42–47 (1997).10.1063/1.881752 ↗
2. K. Koumoto, Y. Wang, R. Zhang, A. Kosuga, and R. Funahashi, Ann. Rev. Mater. Res. 40, 363–394 (2010).10.1146/annurev-matsci-070909-104521 ↗
3. K. Koumoto, R. Funahashi, E. Guilmeau, Y. Miyazaki, A. Weidenkaff, Y. Wang, and C. Wan, J. Am. Ceram. Soc. 96, 1–23 (2013).10.1111/jace.12076 ↗
4. I. Terasaki, Y. Sasago, and K. Uchinokura, Phys. Rev. B 56, R12685 (1997).10.1103/PhysRevB.56.R12685 ↗
5. F. Funahashi and S.U. Urata, Int. J. Appl. Ceram. Technol. 4, 297–307 (2007).10.1111/j.1744-7402.2007.02144.x ↗
6. S. Lee, R.H.T. Wilke, S. Trolier-McKinstry, S. Zhang, and C.A. Randall, Appl. Phys. Lett. 96, 031910–031913 (2010).10.1063/1.3291563 ↗
7. K. Koumoto, I. Terasaki, and R. Funahashi, MRS Bull. 31, 206–210 (2006).10.1557/mrs2006.46 ↗
8. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105–114 (2008).10.1038/nmat2090 ↗
9. B.C. Sales, D. Mandrus, and R.K. Williams, Science 272, 1325–1328 (1996).10.1126/science.272.5266.1325 ↗
10. C.C. Homes, T. Vogt, S.M. Shapiro, S. Wakimoto, and A.P. Ramirez, Science 293, 673 (2001).10.1126/science.1061655 ↗
11. J.L. Zhang, P. Zheng, C.L. Wang, M.L. Zhao, J.C. Li, and J.F. Wang, Appl. Phys. Lett. 87, 142901 (2005).10.1063/1.2077864 ↗
12. D. Chakravarty, P. Singh, S. Singh, D. Kumar, and O. Parkash, J. Alloys Compd. 438, 253 (2007).10.1016/j.jallcom.2006.08.024 ↗
13. D. Capsoni, M. Bini, V. Massarotti, G. Chiodelli, M.C. Mozzatic, and C.B. Azzoni, J. Solid State Chem. 177, 4494 (2004).10.1016/j.jssc.2004.09.009 ↗
14. J. Li, M.A. Subramanian, H.D. Rosenfeld, C.Y. Jones, B.H. Toby, and A.W. Sleight, Chem. Mater. 16, 5223 (2004).10.1021/cm048345u ↗
15. H.B. Xiao, C.P. Yang, C. Huang, L.F. Xu, D.W. Shi, V.V. Marchenkov, I.V. Medvedeva, and K. Bärner, J. Appl. Phys. 111, 063713–063718 (2012).10.1063/1.3697899 ↗
16. L. Zhang and Z.J. Tang, Phys. Rev. B 70, 174306 (2004).10.1103/PhysRevB.70.174306 ↗
17. D. Chakravarty, P. Singh, S. Singh, D. Kumar, and O. Parkash, J. Alloy. Compd. 438, 253–257 (2007).10.1016/j.jallcom.2006.08.024 ↗
18. P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G.L. Chiarotti, M. Cococcioni, I. Dabo, A.D. Corso, S. Gironcoli, S. Fabris, G. Fratesi, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello, L. Paulatto, C. Sbraccia, S. Scandolo, G. Sclauzero, A.P. Seitsonen, A. Smogunov, P. Umari, and R.M. Wentzcovitch, J. Phys. Condens. Matter 21, 395502 (2009).10.1088/0953-8984/21/39/395502 ↗
19. R.Z. Zhang, C.L. Wang, J.C. Li, W.B. Su, J.L. Zhang, M.L. Zhao, J.A. Liu, Y.F. Zhang, and L.M. Mei, Solid State Sci. 12, 1168 (2010).10.1016/j.solidstatesciences.2010.03.021 ↗
20. R.Z. Zhang, C.L. Wang, J.C. Li, and K. Koumoto, J. Am. Ceram. Soc. 93, 1677 (2010).10.1111/j.1551-2916.2010.03619.x ↗
21. Y. Liu, X.Y. Qin, H.X. Xin, J. Zhang, and H.J. Li, J. Appl. Phys. 101, 083709 (2007).10.1063/1.2721381 ↗
22. D.P. Karim and A.T. Aldred, Phys. Rev. B 20, 2255 (1979).10.1103/PhysRevB.20.2255 ↗
23. M. Ohtaki, T. Tokunaga, K. Eguchi, and H. Arayi, Proceedings of the 16th International Conference on Thermoelectrics (IEEE, 1997), p. 224.
24. M.-H. Whangbo and M.A. Subramanian, Chem. Mater. 18, 3257 (2006).10.1021/cm060323f ↗
25. S. Ohta, T. Nomura, H. Ohta, and K. Koumoto, J. Appl. Phys. 97, 4–034106 (2005).10.1063/1.1847723 ↗
26. A.N. Vasil’ev and O.S. Volkova, Low Temp. Phys. 33, 895–914 (2007).10.1063/1.2747047 ↗