journal article·2011-09

Effects of Cooling Rate and Composition on Mechanical Properties of Directionally Solidified Pb100−x -Sn x Solders

E. Çadirli, H. Kaya, M. Şahin

Journal of Electronic Materials· Volume 40· Issue 9
Publisher page

Abstract

Pb100−x -Sn x solders (x = 5 wt.%, 10 wt.%, 20 wt.%, 35 wt.%, 50 wt.%, 60 wt.%, 61.9 wt.%, and 95 wt.%) were directionally solidified upward over a wide range of cooling rates $$ \dot{T} $$ (0.016 K s−1 to 4.0 K s−1) by using a Bridgman-type directional solidification furnace. Microstructure parameters (primary dendrite arm spacing, λ 1, and eutectic spacing, λ E) and mechanical properties (microhardness, HV, and ultimate tensile strength, σ) of the Pb100−x -Sn x alloys were measured. The dependences of the microhardness and ultimate tensile strength on the cooling rate, microstructure parameters, and composition were determined. According to experimental results, the microhardness and ultimate tensile strength of the solidified samples increase with increasing cooling rate and Sn content, but decrease with increasing microstructure parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Solidification and crystal growth phenomena · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. G.S. Brady, H.R. Clauser, and J.A. Vaccari, Materials Handbook, 15th ed. (New York: McGraw-Hill, 2002).
2. E. Çadırlı and M. Gündüz, J. Mater. Process. Technol. 97, 74 (2000).10.1016/S0924-0136(99)00344-1 ↗
3. R. Mahmudi, A.R. Geranmayeh, and A. Rezaee-Bazzaz, J. Alloy. Compd. 427, 124 (2007).10.1016/j.jallcom.2006.02.053 ↗
4. A. Fawzy, A.S.M. Awadallah, M. Sobhy, and G. Saad, Physica B 355, 286 (2005).10.1016/j.physb.2004.11.011 ↗
5. J. Shen, Y.C. Liu, H.X. Gao, C. Wei, and Y.Q. Yang, J. Electron. Mater. 34, 1591 (2005).10.1007/s11664-005-0170-x ↗
6. Y. Ocak, S. Aksöz, N. Maraşlı, and E. Çadırlı, Fluid Phase Equilib. 295, 60 (2010).10.1016/j.fluid.2010.04.003 ↗
7. M.I. Bergman, D.R. Fearn, J. Bloxham, and M.C. Shannon, Metall. Mater. Trans. A 28, 859 (1997).
8. D.R. Poirier and P. Nandapurkar, Metall. Mater. Trans. A 19, 3057 (1988).10.1007/BF02647732 ↗
9. T. El-Ashram, J. Mater. Sci. Mater. Electron. 16, 501 (2005).10.1007/s10854-005-2724-3 ↗
10. Y. Plevachuk, V. Sklyarchuk, A. Yakymovych, B. Willers, and S. Eckert, J. Alloy. Compd 394, 63 (2005).10.1016/j.jallcom.2004.10.051 ↗
11. E.V. Kalashnikov, Tech. Phys. 67, 330 (1997).10.1134/1.1258703 ↗
12. F. Vnuk, M. Sahoo, R. Van De Merwe, and R.W. Smith, J. Mater. Sci. 14, 975 (1979).10.1007/BF00550730 ↗
13. F. Vnuk, M. Sahoo, D. Baragor, and R.W. Smith, J. Mater. Sci. 15, 2573 (1980).10.1007/BF00550762 ↗
14. A.I. Telli and S.E. Kısakürek, J. Mater. Sci. Technol. 4, 153 (1988).10.1179/mst.1988.4.2.153 ↗
15. H. Kaya, M. Gündüz, E. Çadırlı, and O. Uzun, J. Mater. Sci. 39, 6571 (2004).10.1023/B:JMSC.0000044897.98694.be ↗
16. H. Kaya, E. Çadırlı, M. Gündüz, and A. ülgen, J. Mater. Eng. Perform. 12, 544 (2003).10.1361/105994903100277201 ↗
17. S. Khan, A. Ourdjini, Q.S. Hamed, M.A.A. Najafabadi, and R. Elliott, J. Mater. Sci. 28, 5957 (1993).10.1007/BF00365208 ↗
18. A. Berkdemir, M. Gündüz, and H. Kaya, Materials Science & Technology (Cincinnati, OH: Energy Center, 2006), p. 68.
19. M.M. Smedskjaer, M. Jensen, and Y. Yue, J. Non-Cryst. Solids 356, 893 (2010).10.1016/j.jnoncrysol.2009.12.030 ↗
20. W. Xiang, L.H. Mei, L.X. Lin, and Z.Y. Feng, Trans. Nonferrous Met. Soc. China 17, 122 (2007).10.1016/S1003-6326(07)60059-4 ↗
21. J. Li, Z. Qu, R. Wu, and M. Zhang, Mater. Sci. Eng. A 527, 2780 (2010).10.1016/j.msea.2010.01.021 ↗
22. H. Kumar, N. Mehta, K. Singh, and A. Kumar, Physica B 404, 3761 (2009).10.1016/j.physb.2009.06.136 ↗
23. K. Maruyama, K. Suto, and J. Nishizawa, Jpn. J. Appl. Phys. 39, 5180 (2000).10.1143/JJAP.39.5180 ↗
24. W.R. Osorio and A. Garcia, Mater. Sci. Eng. A 325, 103 (2002).10.1016/S0921-5093(01)01455-1 ↗
25. G.A. Santos, C.M. Neto, W.R. Osorio, and A. Garcia, Mater. Des. 28, 2425 (2007).10.1016/j.matdes.2006.09.009 ↗
26. T. Siewert, S. Liu, D.R. Smith, and J.C. Madeni, Database for Solder Properties with Emphasis on New Lead-Free Solders (Colorado: NIST, 2002).
27. http://www.williams-adv.com/packagingMaterials/lead-free-solder.php
28. N. Wade, T. Akuzawa, S. Yamada, D. Sugiyama, I.S. Kim, and K. Miyahara, J. Electron. Mater. 28, 1286 (1999).10.1007/s11664-999-0169-9 ↗
29. K.W. Moon, U.R. Kattner, and C.A. Handwerker, J. Electron. Mater. 36, 676 (2007).10.1007/s11664-007-0117-5 ↗
30. C.M. Chuang, T.S. Lui, and L.H. Chen, J. Electron. Mater. 30, 1232 (2001).10.1007/s11664-001-0155-3 ↗
31. E.O. Hall, Proc. Phys. Soc. Lond. 64B, 747 (1951).10.1088/0370-1301/64/9/303 ↗
32. N.J. Petch, J. Iron Steel Res. Int. 174, 25 (1953).
33. S. Ganesan, C.L. Chan, and D.R. Poirier, Mater. Sci. Eng. A 151, 97 (1992).10.1016/0921-5093(92)90186-5 ↗
34. M.S. Bhat, D.R. Poirier, and J.C. Heinrich, Metall. Mater. Trans. B 26, 1049 (1995).10.1007/BF02654107 ↗
35. A. Ourdjini, J. Liu, and R. Elliott, Mater. Sci. Technol. 10, 312 (1994).10.1179/mst.1994.10.4.312 ↗
36. S.P. Gadag and S. Patra, J. Electron. Mater. 29, 1392 (2000).10.1007/s11664-000-0124-2 ↗
37. K.S. Kim, S.H. Huh, and K. Suganuma, Mater. Sci. Eng. A 333, 106 (2002).10.1016/S0921-5093(01)01828-7 ↗
38. J. Sigelko, S. Choi, K.N. Subramanian, J.P. Lucas, and T.R. Bieler, J. Electron. Mater. 28, 1184 (1999).10.1007/s11664-999-0155-2 ↗
39. L.C. Peixoto, W.R. Osorio, and A. Garcia, J. Power Sources 195, 621 (2010).10.1016/j.jpowsour.2009.08.011 ↗
40. M. Brunovic, V.V. Konchits, and N.K. Myshkin, Electrical Contacts Fundamental, Applications and Technology (Boca Raton: CRC Press, Taylor & Francis Group, 2007).10.1201/9780849391088 ↗
41. C.L. Hernandez, P.T. Vianco and J.A. Rejent, Proceedings, IPC/SMTA Electronics Assembly Expo (Providence, RI, 1998).
42. P. Biocca, Global update on lead-free solders. Proceedings of Surface Mount International (San Jose, CA, 1998).
43. http://www.scribd.com/doc/21429386/International-Nickel-Properties-of-Some-Metals-and-Alloys
44. NCMS, Technical Reports for the Lead Free Solder Project: Properties Reports: Room Temperature Tensile Properties of Lead-Free Solder Alloys (Michigan: National Center for Manufacturing Sciences NCMS, 1998).
45. J.D. Sigelko and K.N. Subramanian, Adv. Mater. Process. 157, 47 (2000).
46. K. Seelig and D. Suraski, Proceedings of the 50th IEEE 2000 Electronic Components and Technology Conference (Las Vegas: IEEE, 2000).
47. J. Madeni, S. Liu and T. Siewert, Casting of lead-free solder bulk specimens with various solidification rates (ASM-International Conference, Indianapolis, 2001).
48. H. Nose, M. Sakane, Y. Tsukada, and H. Nishimura, J. Electron. Packag. 125, 59 (2003).10.1115/1.1533058 ↗
49. T. Yamamoto and K. Tsubone, Fujitsu Sci. Tech. J. 43, 50 (2007).
50. K.C.R. Abell and Y.L. Shen, Acta Mater. 50, 3191 (2002).
51. R.A. Islam, B.Y. Wu, M.O. Alam, Y.C. Chan, and W. Jillek, J. Alloy. Compd 392, 149 (2005).10.1016/j.jallcom.2004.08.079 ↗
52. F. Wang, M. O’Keefe, and B. Brinkmeyer, J. Alloy. Compd. 477, 267 (2009).10.1016/j.jallcom.2008.10.141 ↗
53. V.S. Rao, B.P. Kashyap, N. Prabhu, and P.D. Hodgson, Mater. Sci. Eng. A 486, 341 (2008).10.1016/j.msea.2007.09.004 ↗
54. B.L. Sharma, J. Alloy. Compd. 385, 74 (2004).10.1016/j.jallcom.2004.04.112 ↗