journal article·2012-09

An Analytical Approach to Determine the Pressure Distribution During Chemical Mechanical Polishing

Christian Ludwig, Meinhard Kuna

Journal of Electronic Materials· Volume 41· Issue 9
Publisher page

Abstract

During chemical mechanical polishing the distribution of wear is primarily affected by the pressure distribution on the wafer surface. Moreover, understanding the effects that influence the contact pressure plays a key role in improving the process quality. In this paper a multizone chuck is considered. Two ways to calculate the distribution of contact pressure between wafer and pad are shown. First, an analytical approach is presented, which uses the plate theory to describe the behavior of the carrier. Secondly, a finite-element simulation, which is able to handle more details, is performed to verify that the included assumptions have a negligible impact on the results. It is found that both approaches produce similar results. The reasons for the differences can be explained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. F.W. Preston, J. Soc. Glass Technol. 11, 214 (1927).
2. A. Bastawros, A. Chandra, Y. Guo, and B. Yan, J. Electron. Mater. 31, 1022 (2002).10.1007/s11664-002-0038-2 ↗
3. K.-S. Chen, H.-M. Yeh, J.-L. Yan, and Y.-T. Chen, Int. J. Adv. Manuf. Technol. 42, 1118 (2009).10.1007/s00170-008-1672-5 ↗
4. G. Fu and A. Chandra, J. Electron. Mater. 30, 400 (2001).10.1007/s11664-001-0051-x ↗
5. G. Fu and A. Chandra, J. Electron. Mater. 31, 1066 (2002).10.1007/s11664-002-0044-4 ↗
6. G. Fu and A. Chandra, Thin Solid Films 474, 217 (2005).10.1016/j.tsf.2004.09.010 ↗
7. Y.-Y. Lin and S.-P. Lo, Eng. Appl. Artif. Intel. 18, 373 (2005).10.1016/j.engappai.2004.09.008 ↗
8. S.-P. Lo and Y.-Y. Lin, J. Mater. Process. Technol. 168, 250 (2005).10.1016/j.jmatprotec.2005.01.010 ↗
9. S.R. Runnels and L.M. Eyman, J. Electrochem. Soc. 141, 1698 (1994).10.1149/1.2054985 ↗
10. S.R. Runnels, J. Electrochem. Soc. 141, 1900 (1994).10.1149/1.2055024 ↗
11. C. Srinivasa-Murthy, D. Wang, S.P. Beaudoin, T. Bibby, K. Holland, and T.S. Cale, Thin Solid Films 308–309, 533 (1997).10.1016/S0040-6090(97)00433-1 ↗
12. F.G. Shi and B. Zhao, Appl. Phys. A 67, 249 (1998).10.1007/s003390050766 ↗
13. Y. Sun, R. Kang, and D. Guo, Key Eng. Mater. 364–366, 686 (2008).10.4028/www.scientific.net/KEM.364-366.686 ↗
14. W.-T. Tseng and Y.-L. Wang, J. Electrochem. Soc. 144, L15 (1997).10.1149/1.1837417 ↗
15. W.-T. Tseng, Y.-H. Wang, and J.-H. Chin, J. Electrochem. Soc. 146, 4273 (1999).10.1149/1.1392627 ↗
16. D. Wang, J. Lee, K. Holland, T. Bibby, S. Beaudoin, and T. Cale, J. Electrochem. Soc. 144, 1121 (1997).10.1149/1.1837542 ↗
17. C.-H. Cho, S.-S. Park, and Y. Ahn, Thin Solid Films 389, 254 (2001).10.1016/S0040-6090(01)00883-5 ↗
18. W.J. Patrick, W.L. Guthrie, C.L. Standley, and P.M. Schiable, J. Electrochem. Soc. 138, 1778 (1991).10.1149/1.2085872 ↗
19. C. Ludwig and H. Chaves, J. Electron. Mater. 40, 2264 (2011).10.1007/s11664-011-1735-5 ↗
20. J. Seok, C.P. Sukam, A.T. Kim, J.A. Tichy, and T.S. Cale, Wear 257, 496 (2004).10.1016/j.wear.2004.01.011 ↗
21. K. Hirschfeld, Baustatik, Theorie und Beispiele (Berlin: Springer, 2006).
22. I.S. Gradshteyn and I.M. Ryzhik, Table of Integrals, Series, and Products (San Diego: Academic, 2000).