journal article·2015-11

Protection of Electronics from Environmental Temperature Spikes by Phase Change Materials

M. E. Kiziroglou, E. M. Yeatman

Journal of Electronic Materials· Volume 44· Issue 11
Publisher page

Abstract

Protection of electronics from high temperature environments is desirable in applications such as harsh environment industrial sensor networks for continuous monitoring and probing. In this paper, the use of phase!change!material (PCM) encapsulation of electronics is proposed as protection from environment!induced, probing!induced or electronic power burst ! induced temperature spikes. An outline of the encapsulation method is given and a heat flow analysis is performed. A lumped element model is introduced and a numerical simulator is implemented. An encapsulation setup is fabricated and tested, allowing an experimental validation of the proposed method and model. The numerical simulation model is then used to study particular temperature spike scenarios. The results demonstrate that at reasonable encapsulation sizes and for commercially available phase!change and insulation materials, short!term protection from la rge temperature spikes can be provided by the proposed method. As an indicative example, for a typical sensor node normally operating at a 20 o C environment, PCM encapsulation may provide protection for 28 s of exposure to 1000 o C per PCM gram.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Phase Change Materials Research · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. R. Kandasamy, X.-Q. Wang, and A.S. Mujumdar, Appl. Therm. Eng. 27, 2822 (2007).10.1016/j.applthermaleng.2006.12.013 ↗
2. R. Kandasamy, X.-Q. Wang, and A.S. Mujumdar, Appl. Therm. Eng. 28, 1047 (2008).10.1016/j.applthermaleng.2007.06.010 ↗
3. R. Baby and C. Balaji, Int. J. Therm. Sci. 79, 240 (2014).10.1016/j.ijthermalsci.2013.12.018 ↗
4. S.C. Fok, W. Shen, and F.L. Tan, Int. J. Therm. Sci. 49, 109 (2010).10.1016/j.ijthermalsci.2009.06.011 ↗
5. A. Hasan, S.J. McCormack, M.J. Huang, and B. Norton, Sol. Energy 84, 1601 (2010).10.1016/j.solener.2010.06.010 ↗
6. J. Leland, G. Recktenwald, in Proceedings of the 19th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, (2003), p. 351.
7. A. Alrashdan, A.T. Mayyas, and S. Al-Hallaj, J. Mater. Process. Tech. 210, 174 (2010).10.1016/j.jmatprotec.2009.07.011 ↗
8. X. Duan and G.F. Naterer, Int. J. Heat Mass Tran. 53, 5176 (2010).10.1016/j.ijheatmasstransfer.2010.07.044 ↗
9. Z. Rao and S. Wang, Renew. Sust. Energ. Rev. 15, 4554 (2011).10.1016/j.rser.2011.07.096 ↗
10. Z. Ling, Z. Zhang, G. Shi, X. Fang, L. Wang, X. Gao, Y. Fang, T. Xu, S. Wang, and X. Liu, Renew. Sust. Energ Rev. 31, 427 (2014).10.1016/j.rser.2013.12.017 ↗
11. M.K. Rathod and J. Banerjee, Renew. Sust. Energ. Rev. 18, 246 (2013).10.1016/j.rser.2012.10.022 ↗
12. D. Smith, Texas Instruments Technical White Paper (2013), http://www.ti.com/lit/pdf/slay025 .
13. PlusICE, PCM Products Limited (2014), http://www.pcmproducts.net .
14. M.E. Kiziroglou, A. Elefsiniotis, S.W. Wright, T.T. Toh, P.D. Mitcheson, Th Becker, and E.M. Yeatman, Appl. Phys. Lett. 103, 193902 (2013).10.1063/1.4829044 ↗
15. S. Mahmoud, R. Al-Dadah, D.K. Aspinwall, S.L. Soo, and H. Hemida, Appl. Therm. Eng. 31, 627 (2011).10.1016/j.applthermaleng.2010.09.017 ↗
16. A. Sinha and Y. Joshi, in Proceedings of the 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), (2010), pp. 1–9.