journal article·2016-07

Conductivity of p(AAc) Cryogel and Its Li+, Na+, and K+ Salts for NH3 Sensing

Nurettin Sahiner, Sahin Demirci, Kivanc Sel

Journal of Electronic Materials· Volume 45· Issue 7
Publisher page

Abstract

Poly(acrylic acid) [p(AAc)] cryogel has been synthesized by a cryopolymerization technique under cryogenic conditions. The synthesized p(AAc) cryogel was treated with LiOH, NaOH, and KOH to generate corresponding salt forms of carboxylic acid groups within the p(AAc) cryogel network for activation as p(AAc)-Li+, p(AAc)-Na+, and p(AAc)-K+, respectively. The synthesized p(AAc)-based cryogels were characterized via Fourier-transform infrared (FT-IR) spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The room-temperature electrical conductivity of the p(AAc), p(AAc)-Li+, p(AAc)-Na+, and p(AAc)-K+ cryogels was measured as 10−11 S cm−1, 10−10 S cm−1, 10−9 S cm−1, and 10−8 S cm−1, respectively. Furthermore, the p(AAc) cryogel and its salt forms were tested as sensor materials for NH3 gas by exposing them to NH3 vapor for 60 min under ambient conditions. Upon exposure to NH3 vapor, it was found that the conductivity of the bare p(AAc) and p(AAc)-K+ cryogels increased by up to 105- and 102-fold, respectively, compared with their NH3 unexposed states. The increase in conductivity for the other salt forms of p(AAc) cryogel was about 60-fold compared with their bare form. The conductivity increase for the p(AAc) and p(AAc)-K+ cryogels was therefore further investigated by changing the NH3 vapor exposure time, revealing that these materials could be used as sensors for NH3. It was further found that a 5 min NH3 gas exposure time was sufficient for p(AAc)-K+ cryogel to generate a detectable response via a change in the conductivity of the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Analytical Chemistry and Sensors · Advanced Sensor and Energy Harvesting Materials · Hydrogels: synthesis, properties, applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A. Labudzinska and A. Ziabicki, Kolloid Z. Z. Polym. 243, 21 (1971).10.1007/BF01500610 ↗
2. V.I. Lozinsky, I.Y. Galaev, F.M. Plieva, I.N. Savina, H. Jungvid, and B. Mattiasson, Trends Biotechnol. 21, 445 (2003).10.1016/j.tibtech.2003.08.002 ↗
3. V.I. Lozinsky, Russ. Chem. Rev. 71, 489 (2002).10.1070/RC2002v071n06ABEH000720 ↗
4. O. Okay, Adv. Polym. Sci. 263, 49–101 (2014).10.1007/978-3-319-05846-7_2 ↗
5. M.M. Ozmen and O. Okay, Polymer 46, 8119 (2005).10.1016/j.polymer.2005.06.102 ↗
6. K. Bloch, V.I. Lozinsky, I.Y. Galaev, K. Yavriyanz, M. Vorobeychik, D. Azarov, L.G. Damshkaln, B. Mattiasson, and P. Vardi, J. Biomed. Mater. Res. A 75, 802 (2005).10.1002/jbm.a.30466 ↗
7. N. Kathuria, A. Tripathi, K.K. Kar, and A. Kumar, Acta Biomater. 5, 406 (2009).10.1016/j.actbio.2008.07.009 ↗
8. N. Sahiner and F. Seven, RSC Adv. 4, 23886 (2014).10.1039/c4ra01386g ↗
9. T.M.A. Henderson, K. Ladewig, D.N. Haylock, K.M. McLean, and J. O’Connor, J. Mater. Chem. 1, 2682 (2013).10.1039/c3tb20280a ↗
10. M.B. Dainiak, I.U. Allan, N. Savina, L. Cornelio, E.S. James, S.L. James, S.V. Mikhalovsky, H. Jungvid, and I.Y. Galaev, Biomaterials 31, 67 (2010).10.1016/j.biomaterials.2009.09.029 ↗
11. V.M. Gunkoa, V.V. Turov, V.I. Zarko, E.M. Pakhlov, G.P. Prykhodko, O.S. Remeza, R. Leboda, J.Z. Skubiszewska, and J.P. Blitz, Colloids Surfaces A 436, 618 (2013).10.1016/j.colsurfa.2013.07.036 ↗
12. N. Orakdogen, P. Karacan, and O. Okay, React. Funct. Polym. 73, 442 (2013).10.1016/j.reactfunctpolym.2012.11.014 ↗
13. S. Yildiz, M. Sahiner, and N. Sahiner, Eur. Polym. J. 70, 66 (2015).10.1016/j.eurpolymj.2015.07.005 ↗
14. N. Sahiner, Prog. Polym. Sci. 38, 1329 (2013).10.1016/j.progpolymsci.2013.06.004 ↗
15. N. Bolgen, I. Vargel, P. Korkusuz, E. Guzel, F. Plieva, I. Galaev, B. Matiasson, and E. Piskin, J. Biomed. Mater. Res. A 91, 60 (2009).10.1002/jbm.a.32193 ↗
16. S. Deraz, F.M. Plieva, I.Y. Galaev, E.N. Karlsson, and B. Mattiasson, Enzyme Microb. Technol. 40, 786 (2007).10.1016/j.enzmictec.2006.06.024 ↗
17. Y.N. Belokon, K.A. Kochetkov, F.M. Plieva, N.S. Ikonikkov, V.I. Maleev, V.S. Parmar, R. Kumar, and V.I. Lozinsky, Appl. Biochem. Biotech. 88, 97 (2000).10.1385/ABAB:88:1-3:097 ↗
18. M.N.V.R. Kumar, N. Kumar, A.J. Domb, and M. Arora, Adv. Polym. Sci. 160, 45–117 (2002).10.1007/3-540-45362-8_2 ↗
19. N. Sahiner, S. Demirci, M. Sahiner, S. Yilmaz, and H. Al-Lohedan, J. Environ. Manage. 152, 66 (2015).10.1016/j.jenvman.2015.01.023 ↗
20. F. Seven and N. Sahiner, J. Power Sources 272, 128 (2014).10.1016/j.jpowsour.2014.08.047 ↗
21. A. Fatoni, A. Numnuam, P. Kanatharana, W. Limbut, C. Thammakhet, and P. Thavarungkul, Sensors Actuators B Chem. 185, 725 (2013).10.1016/j.snb.2013.05.056 ↗
22. Y.C. Tsai, J.D. Huang, and C.C. Chiu, Biosens. Bioelectron. 22, 3501 (2007).
23. N. Sahiner and F. Seven, Energy 71, 170 (2014).10.1016/j.energy.2014.04.031 ↗
24. N. Tuzmen, T. Kalburcu, and A. Denizli, Process Biochem. 47, 26 (2012).10.1016/j.procbio.2011.09.021 ↗
25. E.S. Dragan and D.F.A. Loghin, Chem. Eng. J. 234, 211 (2013).10.1016/j.cej.2013.08.081 ↗
26. S. Zheng, T. Wang, D. Liu, X. Liu, C. Wang, and Z. Tong, Polymer 54, 1846 (2013).10.1016/j.polymer.2013.02.008 ↗
27. N. Sahiner and S. Yildiz, Fuel Process. Technol. 126, 324 (2014).10.1016/j.fuproc.2014.05.025 ↗
28. Q. Wan and T.H. Wang, Chem. Commun. 30, 3841 (2005).10.1039/b504094a ↗
29. R.D. Shannon, Cryst. A 32, 751 (1976).10.1107/S0567739476001551 ↗