journal article·2013-03

Cu–Cu Hermetic Seal Enhancement Using Self-Assembled Monolayer Passivation

D. F. Lim, J. Fan, L. Peng, K. C. Leong, C. S. Tan

Journal of Electronic Materials· Volume 42· Issue 3
Publisher page

Abstract

Low-temperature Cu–Cu thermocompression bonding enabled by self-assembled monolayer (SAM) passivation for hermetic sealing application is investigated in this work. Cavities are etched to a volume of 1.4 × 10−3 cm3 in accordance with the MIL-STD-883E standard prescribed for microelectronics packaging. The wafer pairs (nonfunctional cavity wafer and cap wafer) are annealed and bonded at 250°C under a bonding force of 5500 N. The encapsulated cavities undergo helium overpressure in a bombing chamber, and the helium leak rate is detected by a mass spectrometer. The measurement results show that the cavities sealed with Cu–Cu bonding after SAM passivation exhibit excellent hermeticity with a leak rate below 10−9 atm cm3/s, which is an improvement of at least 2× compared with the control sample without SAM passivation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. S.H. Lee, J. Mitchell, W. Welch, S. Lee, and K. Najafi, Proc. SPIE—Int. Soc. Opt. Eng. p. 759205 (2010).10.1117/12.843831 ↗
2. K. Najafi, Proc. SPIE—Int. Soc. Opt. Eng. p. ix (2003).
3. E.J. Jang, B. Kim, T. Matthias, S. Hyun, H.J. Lee, and Y.B. Park, Interconnect Technology Conference, IEEE, p. 165 (2009).10.1109/IITC.2009.5090375 ↗
4. L. Di Cioccio, P. Gueguen, T. Signamarcheix, M. Rivoire, D. Scevolab, R.Cahours, P. Leduc, M. Assous, and L. Clavelier, International Interconnect Technology Conference, IEEE, p. 152 (2009).10.1109/IITC.2009.5090369 ↗
5. S. Taniyama, W. Ying-Hui, M. Fujino, and T. Suga, 9th VLSI Packaging Workshop, IEEE, p. 141 (2008).
6. C.S. Tan, K.N. Chen, A. Fan, and R. Reif, J. Electron. Mater. 34, 1598 (2005).10.1007/s11664-005-0171-9 ↗
7. C.S. Tan, J. Fan, D.F. Lim, G.Y. Chong, and K.H. Li, J. Micromech. Microeng. 21, 7 (2011).
8. D.F. Lim, X.F. Ang, J. Wei, C.M. Ng, and C.S. Tan, Electrochem. Solid State Lett. 13, 12 (2010).
9. C.S. Tan, D.F. Lim, S.G. Singh, S.K. Goulet, and M. Bergkvist, Appl. Phys. Lett. 95, 192108 (2009).10.1063/1.3263154 ↗
10. D.F. Lim, S.K. Goulet, M. Bergkvist, J. Wei, K.C. Leong, and C.S. Tan, J. Electrochem. Soc. 158, 10 (2011).10.1149/1.3519846 ↗
11. L. Peng, H.Y. Yu, D.F. Lim, S. Gao, and C.S. Tan, IEEE. Trans. Electron Devices 58, 8 (2011).
12. MIL-STD-883E. Test method standard 1014.10, Department of Defense, FSC 5962, pp. 1–12 (1995).
13. Y. Tao and A.P. Malshe, Microelectron. Reliab. 45, 55 (2005).
14. P.E. Laibinis and G.M. Whitesides, J. Am. Chem. Soc. 114, 23 (1992).