Critical Current Density for Inhibiting (Cu,Ni)6Sn5 Formation on the Ni Side of Cu/Solder/Ni Joints
Source abstract
Abstract
The Cu/solder/Ni structure is a common joint configuration used in microelectronic packages today. In high-temperature operation of this joint structure, an appreciable amount of Cu can readily diffuse across the entire solder to the Ni side, where it might grow into a brittle bilayer structure of (Cu,Ni)6Sn5/(Ni,Cu)3Sn4. The driving force for Cu diffusion is the chemical potential gradient. To counterbalance this chemical-force-induced Cu flux (JchemCu), an attempt to apply a reverse electric current into a Cu/Sn(50 μm)/Ni structure was made in this study. Ten current densities (j = 0 A/cm2 to 2 × 104 A/cm2) were examined at 150°C upon current stressing. The results indicated that, under current stressing of jcrit, and (III) j ≈ jcrit were also examined in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. S.K. Kang, W.K. Choi, D.Y. Shih, P. Lauro, D.W. Henderson, T. Gosselin, and D.N. Leonard, Proceeding of 52nd Electronic Components and Technology Conference (ECTC) (San Diego, May 2002), pp. 146–153.
2. S.W. Chen, S.H. Wu, and S.W. Lee, J. Electron. Mater. 32, 1188 (2003).10.1007/s11664-003-0010-9 ↗
3. S.J. Wang and C.Y. Liu, J. Electron. Mater. 32, 1303 (2003).10.1007/s11664-003-0027-0 ↗
4. T.L. Shao, T.S. Chen, Y.M. Huang, and C. Chen, J. Mater. Res. 19, 3654 (2004).10.1557/JMR.2004.0478 ↗
5. S.J. Wang and C.Y. Liu, J. Electron. Mater. 35, 1955 (2006).10.1007/s11664-006-0299-2 ↗
6. Y. Xia, C. Lu, J. Chang, and X. Xie, J. Electron. Mater. 35, 897 (2006).10.1007/BF02692545 ↗
7. C.E. Ho, S.C. Yang, and C.R. Kao, J. Mater. Sci. Mater. Electron. 18, 155 (2007).10.1007/s10856-006-0675-8 ↗
8. J.Y. Kim, Y.C. Sohn, and J. Yu, J. Mater. Res. 22, 770 (2007).10.1557/jmr.2007.0085 ↗
9. H.T. Chen, C.Q. Wang, C. Yan, M.Y. Li, and Y. Huang, J. Electron. Mater. 36, 26 (2007).10.1007/s11664-006-0005-4 ↗
10. C.W. Chang, S.C. Yang, C.T. Tu, and C.R. Kao, J. Electron. Mater. 36, 1455 (2007).10.1007/s11664-007-0235-0 ↗
11. K.K. Hong, J.B. Ryu, C.Y. Park, and J.Y. Huh, J. Electron. Mater. 37, 61 (2008).10.1007/s11664-007-0283-5 ↗
12. J.W. Jang, J.K. Lin, and D.R. Frear, J. Electron. Mater. 36, 207 (2007).10.1007/s11664-007-0089-5 ↗
13. L. Snugovsky, C. Cermignani, D.D. Perovic, and J.W. Rutter, J. Electron. Mater. 33, 1313 (2004).10.1007/s11664-004-0159-x ↗
14. W.H. Wu, H.L. Chung, C.N. Chen, and C.E. Ho, J. Electron. Mater. 38, 2563 (2009).10.1007/s11664-009-0876-2 ↗
15. W.K. Warburton and D. Turnbull, Diffusion in Solids— Recent Developments, ed. A.S. Nowick and J.J. Burton (New York: Academic, 1975), p. 171.10.1016/B978-0-12-522660-8.50009-X ↗
16. K.N. Tu, Solder Joint Technology-Materials, Properties, and Reliability (New York: Springer, 2007).
17. C.E. Ho, A. Lee, and K.N. Subramanian, J. Mater. Sci. Mater. Electron. 18, 569 (2007).10.1007/s10854-007-9263-z ↗
18. T. Laurila, V. Vuorinen, and J.K. Kivilahti, Mater. Sci. Eng. R49, 1 (2005).10.1016/j.mser.2005.03.001 ↗
19. C.E. Ho, L.C. Shiau, and C.R. Kao, J. Electron. Mater. 31, 1264 (2002).10.1007/s11664-002-0019-5 ↗
20. I.A. Blech, J. Appl. Phys. 47, 1203 (1976).10.1063/1.322842 ↗
21. C.C. Wei and C. Chen, Appl. Phys. Lett. 88, 182105 (2006).10.1063/1.2200158 ↗
22. B.F. Dyson, T.R. Anthony, and D. Turnbull, J. Appl. Phys. 38, 3408 (1967).10.1063/1.1710127 ↗
23. H. Schoeller, S. Bansal, A. Knobloch, D. Shaddock, and J. Cho, J. Electron. Mater. 38, 802 (2009).10.1007/s11664-009-0767-6 ↗