journal article·2014-09

Effect of Pd Interlayer on Electrochemical Properties of ENIG Surface Finish in 3.5 wt.% NaCl Solution

N. D. Nam, Q. V. Bui, H. T. Nhan, D. V. Phuong, M. Z. Bian

Journal of Electronic Materials· Volume 43· Issue 9
Publisher page

Abstract

The corrosion resistance of a multilayered (NiP-Pd-Au) coating with various thicknesses of palladium (Pd) interlayer deposited on copper by an electroless method was investigated using electrochemical techniques including potentiodynamic polarization and electrochemical impedance spectroscopy. In addition, the surface finish was examined by x-ray diffraction analysis and scanning electron microscopy, and the contact angle of the liquid–solid interface was recorded. The corrosion resistance of the copper substrate was considerably improved by Pd interlayer addition. Increase of the thickness of the Pd interlayer enhanced the performance of the Cu-NiP-Pd-Au coating due to low porosity, high protective efficiency, high charge-transfer resistance, and contact angle. These are attributed to the diffusion of layers in the Cu-NiP-Pd-Au coating acting as a physical barrier layer, leading to the protection provided by the coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and devices · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. J.G. Ryan, R.M. Geffken, N.R. Poulin, and J.R. Parasczak, IBM J. Res. Dev. 39, 371 (1995).10.1147/rd.394.0371 ↗
2. S.P. Murapka, Mater. Sci. Eng. R 19, 87 (1997).10.1016/S0927-796X(97)00002-8 ↗
3. A. Kohn, M. Eizenberg, Y.S. Diamand, and Y. Sverdlov, Mater. Sci. Eng. A 302, 18 (2001).10.1016/S0921-5093(00)01348-4 ↗
4. I.S. Bae, S.H. Cho, Y.S. Park, B. Hong, Z.T. Park, J.G. Kim, and J.H. Boo, Thin Solid Films 506–507, 2 (2006).10.1016/j.tsf.2005.08.014 ↗
5. D.J. Godbey, L.J. Buckley, A.P. Purdy, and A.W. Snow, Thin Solid Films 308–309, 470 (1997).10.1016/S0040-6090(97)00488-4 ↗
6. S.B. Jung, H.H. Park, and H.C. Kim, Thin Solid Films 447–448, 575 (2004).10.1016/j.tsf.2003.07.019 ↗
7. D. Gupta, Mater. Chem. Phys. 41, 199 (1995).10.1016/0254-0584(95)01514-0 ↗
8. N.D. Nam, J.G. Kim, S.M. Park, and N.E. Lee, Met. Mater. Int. 14, 197 (2008).10.3365/met.mat.2008.04.197 ↗
9. N.D. Nam, J.H. Ahn, N.E. Lee, and J.G. Kim, Mater. Res. Bull. 45, 269 (2010).10.1016/j.materresbull.2009.12.024 ↗
10. G. Salvago, G. Fumagalli, and F. Brunella, Surf. Coat. Technol. 37, 449 (1989).10.1016/0257-8972(89)90083-2 ↗
11. Y.Y. Li and F.B. Wu, Thin Solid Films 518, 7527 (2010).10.1016/j.tsf.2010.05.039 ↗
12. Q.V. Bui, N.D. Nam, A. Kar, J.G. Kim, and S.B. Jung, Mater. Res. Bull. 45, 305 (2010).10.1016/j.materresbull.2009.12.006 ↗
13. Y. Wang, Y. Deng, Y. Ma, and F. Gao, Surf. Coat. Technol. 206, 1203 (2011).10.1016/j.surfcoat.2011.08.027 ↗
14. Q.V. Bui, N.D. Nam, J.W. Yoon, D.H. Choi, A. Kar, J.G.␣Kim, and S.B. Jung, J. Electron. Mater. 40, 1937 (2011).10.1007/s11664-011-1682-1 ↗
15. J.W. Yoon, H.S. Chun, H.B. Kang, M.H. Park, C.W. Yang, H.J. Lee, and S.B. Jung, Surf. Rev. Lett. 14, 827 (2007).10.1142/S0218625X07010111 ↗
16. R.P. Frankenthal, Corros. Sci. 31, 59 (1990).10.1016/0010-938X(90)90091-I ↗
17. P.T. Liu, Y.T. Chou, and H.M. Chen, Surf. Coat. Technol. 205, 1497 (2010).10.1016/j.surfcoat.2010.10.011 ↗
18. J.W. Jang, D.R. Frear, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 88, 6359 (2000).10.1063/1.1321787 ↗
19. J.W. Yoon and S.B. Jung, Surf. Coat. Tech. 200, 4440 (2006).10.1016/j.surfcoat.2005.03.038 ↗
20. M.N. Islam and Y.C. Chan, J. Electron. Mater. 34, 662 (2005).10.1007/s11664-005-0081-x ↗
21. G. Milad and M. Orduz, Met. Finish. 105, 25 (2007).10.1016/S0026-0576(07)80007-9 ↗
22. Y.W. Yen, P.H. Tsai, Y.K. Fang, S.C. Lo, Y.P. Hsieh, and C.␣Lee, J. Alloys Compd. 503, 25 (2010).10.1016/j.jallcom.2010.04.241 ↗
23. J.W. Yoon, B.I. Noh, and S.B. Jung, J. Electron. Mater. 40, 1950 (2011).10.1007/s11664-011-1686-x ↗
24. S.P. Peng, W.H. Wu, C.E. Ho, and Y.M. Huang, J. Alloys Compd. 493, 431 (2010).10.1016/j.jallcom.2009.12.119 ↗
25. W.H. Wu, C.S. Lin, S.H. Huang, and C.E. Ho, J. Electron. Mater. 39, 2387 (2010).10.1007/s11664-010-1351-9 ↗
26. N.D. Nam, J.G. Kim, and W.S. Hwang, Thin Solid Films 517, 4772 (2009).10.1016/j.tsf.2009.03.079 ↗
27. D.A. Jones, Principles and Prevention of Corrosion, 2nd ed. (Singapore: Prentice Hall, 1997), p. 148.
28. N.D. Nam, J.G. Kim, Y.J. Lee, and Y.K. Son, Corros. Sci. 51, 3007 (2009).10.1016/j.corsci.2009.08.034 ↗
29. D. Taneichi, R. Haneda, and K. Aramaki, Corros. Sci. 43, 1589 (2001).10.1016/S0010-938X(00)00152-9 ↗
30. N.D. Nam and J.G. Kim, Jpn. J. Appl. Phys. 47, 6887 (2008).10.1143/JJAP.47.6887 ↗
31. J.R. Scully and S.T. Hensley, Corrosion 50, 705 (1994).10.5006/1.3293547 ↗
32. N.D. Nam, J.G. Kim, D.J. Kim, and N.E. Lee, Jpn. J. Appl. Phys. 47, 6982 (2008).10.1143/JJAP.47.6982 ↗