journal article·2009-10

Influence of Lanthanum Additions on the Microstructure and Microhardness of Sn-3.5Ag Solder

Hwa-Teng Lee, Yin-Fa Chen

Journal of Electronic Materials· Volume 38· Issue 10
Publisher page

Abstract

This study evaluates the effects of different amounts of lanthanum (La) additions on the microstructure and microhardness of Sn-3.5Ag solders. Sn-3.5Ag-xLa ternary solders were prepared by adding 0 wt.% to 1.0 wt.% La to Sn-3.5Ag alloy. Copper substrates were then dipped in the molten solders and these samples aged at 150°C for up to 625 h. The microstructure and microhardness of the as-solidified solder and the aged solder/copper samples were investigated. The Sn-3.5Ag-xLa solders comprised β-Sn, Ag3Sn, and LaSn3 phases, and their microstructure was refined by La additions. As-cast, the addition of La increased the microhardness of the Sn-Ag solder due to the refining effect of Ag3Sn particles and increased formation of LaSn3 compounds. As the aging time was increased, the microhardness of the solders decreased and the Ag3Sn compounds coarsened. However, the coarsening of Ag3Sn compounds was retarded by La, and the size and amount of LaSn3 compounds did not change perceptibly with aging time. Therefore, La additions can improve the microhardness and thermal resistance of solder joints.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. The European Parliament and the Council of the European Union, Off. J. Eur. Union 37, 24 (2003).
2. ESPEC Technology Report, 1 (2002).
3. D.R. Flanders, E.G. Jacobs, and R.F. Pinizzotto, J. Electron. Mater. 26, 883 (1997).10.1007/s11664-997-0268-4 ↗
4. L. Wang, D.Q. Yu, J. Zhao, and M.L. Huang, Mater. Lett. 56, 1039 (2002).10.1016/S0167-577X(02)00672-9 ↗
5. Z. Xia, Z. Chen, Y. Shi, N. Mu, and N. Sun, J. Electron. Mater. 31, 564 (2002).10.1007/s11664-002-0126-3 ↗
6. C.M.T. Law and C.M.L. Wu, Proceeding of the 6th IEEE CPMT Conf. (IEEE, 2004), pp. 60–65.
7. C.M.L. Wu, D.Q. Yu, C.M.T. Law, and L. Wang, J. Electron. Mater. 31, 928 (2002).10.1007/s11664-002-0185-5 ↗
8. X. Ma, Y. Qian, and F. Yoshida, J. Alloy. Compd. 334, 224 (2002).10.1016/S0925-8388(01)01747-9 ↗
9. C.M.T. Law, C.M.L. Wu, D.Q. Yu, L. Wang, and J.K.L. Lai, J. Electron. Mater. 35, 89 (2006).10.1007/s11664-006-0189-7 ↗
10. X. Mal, Y.Y. Qian, F. Liu, and F. Yoshida, 8th Failure Analysis of Integrated Circuits (Singapore: IEEE, 2001), pp.␣63–66.
11. L. Liang, Q. Wang, and Z. Zhao, 8th International Conference on Electronic Packaging Technology (IEEE, 2007), pp.␣1–4.10.1109/ICEPT.2007.4441436 ↗
12. H. Hao, J. Tian, Y.W. Shi, Y.P. Lei, and Z.D. Xia, J. Electron. Mater. 36, 766 (2007).10.1007/s11664-007-0138-0 ↗
13. M. Dudek, R. Sidhu, N. Chawla, and M. Renavikar, J.␣Electron. Mater. 35, 2088 (2006).10.1007/s11664-006-0318-3 ↗
14. D.Q. Yu, J. Zhao, and L. Wang, J. Alloy. Compd. 376, 170 (2004).10.1016/j.jallcom.2004.01.012 ↗
15. Z.G. Chen, Y.W. Shi, Z.D. Xia, and Y.F. Yan, J. Electron. Mater. 31, 1122 (2002).10.1007/s11664-002-0052-4 ↗
16. H.Y. Lu, H. Balkan, and K.Y. Simon Ng, J Mater Sci-Mater. Electron. 17, 171 (2006).10.1007/s10854-006-6758-y ↗
17. B. Li, Y.W. Shi, Y.P. Lei, F. Guo, Z. Xia, and B. Zong, J.␣Electron. Mater. 34, 217 (2005).10.1007/s11664-005-0207-1 ↗