Cellulose Acetate/N-TiO2 Biocomposite Flexible Films with Enhanced Solar Photochromic Properties
Source abstract
Abstract
Flexible cellulose acetate/N-TiO2 nanocomposite films containing various concentrations of nanosized N-TiO2 and an intelligent methylene blue ink have been prepared by solution casting. The hydrothermally prepared nitrogen-doped titania (N-TiO2) and the films were characterized in detail. The photochromic properties of the prepared films were investigated under ultraviolet (UV), visible light, and simulated solar irradiation by UV–Vis spectrophotometry. Upon irradiation, the films exhibited rapid photochromic response that was reversible at room temperature. Films with higher content of nano N-TiO2 showed enhanced decoloration/recoloration under all irradiation conditions, with fast decoloration/recoloration under simulated solar irradiation. These results suggest that the amount of nano N-TiO2 in the composite, the concentration of methylene blue, and the solvent greatly influence the photochromic properties of the films. Such flexible and transparent cellulose acetate/N-TiO2 films with enhanced decoloration/recoloration properties under solar irradiation are promising smart materials for use in photoreversible printed electronics applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. M. Nogi and H. Yano, Adv. Mater. 20, 1849 (2008).10.1002/adma.200702559 ↗
2. T. Abitbol, A. Rivkin, Y. Cao, Y. Nevo, E. Abraham, T. Ben-Shalom, S. Lapidot, and O. Shoseyov, Curr. Opin. Biotechnol. 39, 76 (2016).10.1016/j.copbio.2016.01.002 ↗
3. M. Biancardo, R. Argazzi, and C.A. Bignozzi, Inorg. Chem. 44, 9619 (2005).10.1021/ic0514593 ↗
4. W. Wang, N. Xie, L. He, and Y. Yin, Nat. Commun. 5, 5459 (2014).10.1038/ncomms6459 ↗
5. S.M.A.S. Keshk, M.S. Hamdy, and I.H.A. Badr, Am. J. Polym. Sci. 5, 24 (2015).
6. H. Kato, K. Asakura, and A. Kudo, J. Am. Chem. Soc. 125, 3082 (2003).10.1021/ja027751g ↗
7. O.L. Galkina, K. Onneby, P. Huang, V.K. Ivanov, A.V. Agafonov, G.A. Seisenbaeva, and V.G. Kessler, J. Mater. Chem. B 3, 7125 (2015).10.1039/C5TB01382H ↗
8. B. Naik, S. Martha, and K.M. Parida, Int. Hydrog. Energy 36, 2794 (2011).10.1016/j.ijhydene.2010.11.104 ↗
9. J. Jang, H.S. Lee, and W.S. Lyoo, Fibers Polym. 8, 19 (2007).10.1007/BF02908155 ↗
10. A.W. Morawski, E. Nejman, J. Przepiorski, R. Kordala, and J. Pernak, Cellulose 20, 1293 (2013).10.1007/s10570-013-9906-6 ↗
11. S.D. Wang, Q. Ma, H. Liu, K. Wang, L.Z. Ling, and K.Q. Zhang, Adv. Mater. 5, 40521 (2015).
12. A. Mills, J. Wang, S.K. Lee, and M. Simonsen, Chem. Comm. (2005). doi: 10.1039/b501131k .10.1039/b501131k ↗
13. X. Jin, J. Xu, X. Wang, Z. Xie, Z. Liu, B. Liang, D. Chen, and G. Shen, Adv. Mater. 4, 12640 (2014).
14. R. Dholam, N. Patel, A. Adami, and A. Miotello, Int. J. Hydrog. Energy 34, 5337 (2009).10.1016/j.ijhydene.2009.05.011 ↗
15. T.C. Hong, T. Radhika, R.J. Ramalingam, and F. Adam, Synth. React. Inorg. Metal-Org. Nano-Metal Chem. 46, 741 (2016).10.1080/15533174.2014.989581 ↗
16. W. Wang, M. Ye, L. He, and Y. Yin, Nano Lett. 14, 1681 (2014).10.1021/nl500378k ↗
17. A. Mills and D. Hazafy, Analyst 133, 213 (2008).10.1039/B713450A ↗
18. T. Ohsaka, F. Izumi, and Y. Fujiki, J. Raman Spectrosc. 7, 321 (1978).10.1002/jrs.1250070606 ↗
19. M.H. Razali, A.M.N. Fauzi, A.R. Mohamed, and S. Sreekantan, Int. J. Mater. Mech. Manuf. 1, 314 (2013).
20. A.L. Castro, M.R. Carvalho, M.D. Ferreira, and L.P. Jumas, J. Solid State Chem. 182, 1838 (2009).10.1016/j.jssc.2009.04.020 ↗
21. J. Jang, H.S. Lee, and W.S. Lyoo, Fibers Polym. 8, 19 (2007).10.1007/BF02908155 ↗