journal article·2011-11

Influence of Bonding Parameters on the Interaction Between Cu and Noneutectic Sn-In Solder Thin Films

Wardhana A. Sasangka, Chee Lip Gan, Carl V. Thompson, Won Kyoung Choi, Jun Wei

Journal of Electronic Materials· Volume 40· Issue 11
Publisher page

Abstract

Thermocompression bonding of through-layer copper interconnects is of great interest for fabrication of three-dimensional (3D) integrated circuits. We have investigated interactions of Cu films with noneutectic Sn-In at length scales of 1 μm to 5 μm. The effects of bonding time, bonding temperature, and post- bonding annealing temperature on intermetallic compound (IMC) formation, joint microstructure, and shear strength were investigated using scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDS), x-ray diffractometry (XRD), and shear testing. It is shown that bonding temperature plays an important role in increasing the true contact area, while the postbonding annealing temperature affects the formation of a single IMC, the η-phase [Cu6(Sn,In)5]. Both of these phenomena were found to contribute to the shear strength of the joints. It is shown that two-step bonding processes, involving short bonding times and longer postbonding annealing, can be used to optimize the bond formation for increased throughput.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. F. Bartels, J.W. Morris, G. Dalke, and W. Gust, J. Electron. Mater. 23, 787 (1994).10.1007/BF02651374 ↗
2. R. Made, C. Gan, L. Yan, A. Yu, S. Yoon, J. Lau, and C. Lee, J. Electron. Mater. 38, 365 (2009).10.1007/s11664-008-0555-8 ↗
3. R.W. Chuang and C.C. Lee, IEEE Trans. Comp. Packag. Technol. 25, 453 (2002).10.1109/TCAPT.2002.801113 ↗
4. L.-l. Yan, C.-k. Lee, D.-q. Yu, A.-b. Yu, W.-K. Choi, J.-H. Lau, and S.-U. Yoon, J. Electron. Mater. 38, 200 (2009).
5. K. Sakuma, P.S. Andry, B. Dang, J. Maria, C.K. Tsang, C. Patel, S.L. Wright, B. Webb, E. Sprogis, S.K. Kang, R. Polastre, R. Horton, and J.U. Knickerbocker, Electronic Components and Technology Conference, 2007. ECTC’07. Proceedings. 57th, 2007, pp. 627–632.10.1109/ECTC.2007.373862 ↗
6. W.K. Choi, D. Yu, C. Lee, L. Yan, A. Yu, S.W. Yoon, J.H. Lau, M.G. Cho, Y.H. Jo, and H.M. Lee, Electronic Components and Technology Conference, 2008. ECTC 2008. 58th, 2008, pp. 1294–1299.
7. I. Ohnuma, Y. Cui, X.J. Liu, Y. Inohana, S. Ishihara, H. Ohtani, R. Kainuma, and K. Ishida, J. Electron. Mater. 29, 1113 (2000).10.1007/s11664-000-0002-y ↗
8. J.M. Koo and S.B. Jung, Microsyst. Technol. 13, 1567 (2007).10.1007/s00542-006-0344-3 ↗
9. D.G. Kim and S.B. Jung, J. Alloy. Compd. 386, 151 (2005).10.1016/j.jallcom.2004.05.055 ↗
10. T.H. Chuang, C.L. Yu, S.Y. Chang, and S.S. Wang, J. Electron. Mater. 31, 640 (2002).10.1007/s11664-002-0136-1 ↗
11. S.J. Wang and C.Y. Liu, Acta Mater. 55, 3327 (2007).10.1016/j.actamat.2007.01.031 ↗
12. S.W. Chen, S.H. Wu, and S.W. Lee, J. Electron. Mater. 32, 1188 (2003).10.1007/s11664-003-0010-9 ↗
13. S.J. Wang and C.Y. Liu, J. Electron. Mater. 32, 1303 (2003).10.1007/s11664-003-0027-0 ↗
14. Y.-W. Yen, H.W. Tseng, K. Zeng, S.J. Wang, and C.Y. Liu, J. Electron. Mater. 38, 2257 (2009).10.1007/s11664-009-0920-2 ↗
15. S. Sommadossi and A.F. Guillermet, Intermetallics 15, 912 (2007).10.1016/j.intermet.2006.10.050 ↗
16. W.A. Sasangka, C.L. Gan, C.V. Thompson, W.K. Choi, and J. Wei, Electronics Packaging Technology Conference, 2009. EPTC’09. 11th, IEEE, 2010, pp. 336–341.10.1109/EPTC.2009.5416527 ↗
17. J. Pullen and J.B.P. Williamson, Proc. R. Soc. Lond. A 327, 159 (1972).10.1098/rspa.1972.0038 ↗
18. L.S. Palatnik, M.E. Shcherbina, and A.A. Litvinenko, Strength Mater. 13, 496 (1981).10.1007/BF00762506 ↗
19. X. Liu, H. Liu, I. Ohnuma, R. Kainuma, K. Ishida, S. Itabashi, K. Kameda, and K. Yamaguchi, J. Electron. Mater. 30, 1093 (2001).10.1007/s11664-001-0135-7 ↗
20. S. Sommadossi, W. Gust, and E.J. Mittemeijer, Mater. Chem. Phys. 77, 924 (2003).10.1016/S0254-0584(02)00192-X ↗
21. M. Lane, A. Vainchtein, H. Gao, and Dauskardt, J. Mater. Res. 15, 2758 (n.d.).10.1557/JMR.2000.0395 ↗
22. R.I. Made, C.L. Gan, and L. Yan, Materials and Technologies for 3-D Integration, MRS Fall Meeting, 2008.
23. X.F. Ang, G.G. Zhang, J. Wei, Z. Chen, and C.C. Wong, Thin Solid Films 504, 379 (2006).10.1016/j.tsf.2005.09.071 ↗
24. J. Wang, E. Besnoin, O.M. Knio, and T.P. Weihs, Acta Mater. 52, 5265 (2004).10.1016/j.actamat.2004.07.012 ↗
25. S.R. Chun, W.A. Sasangka, C. Gan, H. Cai, and C.M. Ng, Advances in Metal Thin-Film Deposition, Materials Research Society Spring Meeting, San Francisco, 2010.
26. R.I. Made (PhD Thesis, Nanyang Technological University, 2011).
27. B. Lee, J. Park, S.-jae. Jeon, K.-won. Kwon, and H.-jeong. Lee, J. Electrochem. Soc. 157, H420 (2010).10.1149/1.3301931 ↗
28. S.A. Sommadossi (PhD Thesis, Max Planck Institute, 2002).
29. G.T. Lim, B.J. Kim, K. Lee, J. Kim, Y.C. Joo, and Y.B. Park, J. Electron. Mater. 38, 2228 (2009).10.1007/s11664-009-0922-0 ↗