Comparative study of electrically conductive thick films with and without glass
Source abstract
Abstract
An air-fireable, glass-free, electrically conductive thick-film material (96.6% Ag, 1.38% Cu, 0.28% Al, 0.35% Ti, and 1.39% Sn by weight) and a conventional glass-containing, electrically conductive thick-film materials (96.6% Ag and 3.4% glass frit by weight), both on alumina substrates, were studied by electrical, mechanical, thermal, and microscopic methods. The volume electrical resistivity of the glass-free thick film (2.5×10−6 Ω·cm, 30-μm thick) is lower than that of the glass-containing thick film (3.9×10−6 Ω·cm, 19-μm thick), with each film processed at its optimum firing temperature. The optimum firing temperature is 930°C and 850°C for glass-free and glass-containing thick films, respectively, as indicated by the criteria of low resistivity and high scratch resistance. The glass-free thick film has a higher scratch resistance than the glass-containing thick film, both fired at their respective optimum temperatures, suggesting that the former has higher bond strength to the alumina substrate. The formation process of the glass-free and glass-containing thick films is similar. The process involves solid-state diffusion of silver, which results in a silver network and grain boundaries. However, the sintering of silver particulates in the glass-containing thick film is enhanced by the viscous flow of glass.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Thermal Properties of Materials · Glass properties and applications · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. C.J.M. Lasance, H. Vinke, and H. Rosten, IEEE Trans. Comp., Packaging, Manufacturing Technol. 18, 1 (1995).
2. M. Novotny, Precious Metals 1983 Proc. (New York: Pergamon Press Inc., 1984), p. 69.
3. S.G. Yu, Precious Metals 1987 (Allentown, PA: International Precious Metals Institute, 1987), p. 81.
4. R.R. Getty, B.E. Taylor, and C.R.S. Needs, Solid State Technol. 26, 163 (1983).
5. V.K. Nagesh and R.M. Fulrath, Am. Ceram. Soc. Bull. 58, 455 (1979).
6. S.J. Stein, C. Huang, and L. Cang, Solid State Technol. 24, 73 (1981).
7. T.R. Bloom, European patent EP 0558841 (Sept. 8, 1993).
8. F. Sirotti, M. Prudenziati, T. Manfredini, B. Giardullo, and W. Anzolin, J. Mater. Sci. 25, 4688 (1990).10.1007/BF01129925 ↗
9. S.B. Rane, T. Seth, G.J. Phatak, D.P. Amalnerkar, and M. Ghatpande, J. Mater. Sci: Mater. Electron. 15, 103 (2004).
10. A.G. Saunders, Post Office Electr. Eng. J. 73, 2 (1980).
11. S. Rane, V. Puri, and D. Amalnerkar, J. Mater. Sci: Mater. Electron. 11, 667 (2000).
12. M. Zhu and D.D.L. Chung, J. Electron. Mater. 23, 541 (1994).10.1007/BF02670657 ↗
13. Z. Liu and D.D.L. Chung, J. Electron. Packaging 123, 64 (2001).10.1115/1.1329131 ↗
14. Z. Liu and D.D.L. Chung, J. Electron. Mater. 30, 1458 (2001).10.1007/s11664-001-0202-0 ↗
15. C.-K. Leong and D.D.L. Chung, Carbon 41, 2459 (2003).10.1016/S0008-6223(03)00247-1 ↗
16. G. Garter, Principles of Physical and Chemical Metallurgy (Metals Park, OH: ASM, 1979), p. 103.