Effect of Si or Al interface layers on the properties of Ta and Mo contacts to p-type SiC
Source abstract
Abstract
We present our results on the role of Si or Al interface layers on the structure and electrical properties of tantalum and molybdenum contacts to p-type 6H-SiC. Thin films of Ta or Mo were deposited on p-type SiC with and without p-doped Si or Al interface layers. The Ta/p-SiC, Ta/p-Si/p-SiC, Ta/Al/p-SiC, Mo/p-SiC, and Mo/Al/p-SiC structures were annealed at high temperatures up to 1200°C using the rapid thermal annealing process, in Ar-H2 or N2-H2 ambient. X-ray diffraction analysis showed TaSi2 in both Ta/p-SiC and Ta/p-Si/p-SiC structures annealed in Ar-H2 ambient. For the N2-H2 ambient anneal tantalum nitride (TaN) was formed in Ta/p-SiC and Ta/Al/p-SiC, and TaN plus TaSi2 in Ta/p-Si/p-SiC. While there was evidence of interaction between Mo and Si or Al no intermetallic phases were observed. Electrical measurements revealed that both TaN in Ta/p-SiC and TaN + TaSi2 in Ta/p-Si/p-SiC structures made ohmic contacts, with specific contact resistances of about 2.13 × 10−3 and 1.47 × 10−1 Ω-cm2, respectively. The specific contact resistance for Ta/Al and Mo/Al layers on p-SiC decreases with increasing temperature and varies with anneal ambient. The values calculated for Ta/Al/p-SiC and Mo/Al/p-SiC were about 4.22 × 10−4 at 1100°C and 4.5 × 10−5 Ω-cm2 at 1200°C, respectively. The heavy surface doping provided by Al in Ta/Al/p-SiC and Mo/Al/p-SiC is responsible for the low specific contact resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and interfaces · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. N. Braslau, J.B. Gun, and J.L. Staples, Solid State Electron. 10, 381 (1967).10.1016/0038-1101(67)90037-8 ↗
2. N.F. Mott, Proc. Cambr. Philos. Soc. 34, 568 (1938).10.1017/S0305004100020570 ↗
3. L.M. Porter and R.F. Davis, Mater. Sci. Eng. B 34, 83 (1995).10.1016/0921-5107(95)01276-1 ↗
4. D.M. Brown, M. Ghezzo, J. Kretchmer, V. Krishnamurthy, G. Michon, and G. Gati, Trans. 2nd Int. High Temp. Electron. Conf. (Albuquerque, NM: Sandia National Laboratories, 1994), p. 11.
5. J. Croften, P.A. Barnes, J.R. Williams, and J.A. Edmond, Appl. Phys. Lett. 62, 384 (1993).10.1063/1.108964 ↗
6. T. Uemoto, Jpn. J. Appl. Phys. 34, L7 (1995).10.1143/JJAP.34.L7 ↗
7. O. Nennewitz, L. Spiess, and V. Breternitz, Appl. Surf. Sci. 91, 347 (1995).10.1016/0169-4332(95)00144-1 ↗
8. S. Adams, C. Severt, J. Leonard, and S. Liu, Trans. 2nd Int. High Temp. Electron. Conf. (Albuquerque, NM: Sandia National Laboratories, 1994).
9. T. Teraji, S. Hara, H. Okushi, and K. Kajimura, Appl. Phys. Lett. 71, 689 (1997).10.1063/1.119831 ↗
10. N. Lundberg and M. Ostling, Solid State Electron. 39, 1559 (1996).10.1016/0038-1101(96)00071-8 ↗
11. J.H. Zhao, K. Tone, S.R. Weiner, M. Caleca, H. Du, and S.P. Withrow, IEEE Electron. Dev. Lett. 18, 375 (1997).10.1109/55.605444 ↗
12. T.N. Oder, J.R. Williams, S.E. Mohney, and J. Croften, J. Electron. Mater. 27, 12 (1998).
13. A.A. Iliadis, S.N. Andronescu, W. Yang, R.D. Vispute, A. Stanishevsky, J.H. Orloff, R.P. Sharma, T. Venkatesan, M.C. Wood, and K.A. Jones, J. Electron. Mater. 28, 136 (1999).10.1007/s11664-999-0002-5 ↗
14. L.R. Doolittle, Nucl. Instrum. Methods Phys. Rs. B9, 344 (1985).10.1016/0168-583X(85)90762-1 ↗
15. J.W. Mayer and S.S. Lau, Electronic Materials Science: For Integrated Circuits in Si and GaAS (New York: Macmillan Publishing Co., 1990).
16. S.P. Murarka, Silicides for VLSI Applications (New York: Academic Press, Inc., 1983).