Deposition Characteristics of AlN Thin Film Prepared by the Dual Ion Beam Sputtering System
Source abstract
Abstract
In this experiment, a radio frequency dual ion beam sputtering (DIBS) system was used to prepare aluminum nitride (AlN) films with a bottom Al electrode on a Si (100) substrate. After systematic testing of the processing variables, a high-quality film with preferred c-axis orientation was grown successfully on the Si (100) substrate with an Al target under 700 eV energy flux, N2/(N2 + Ar) ratio of 55%, and 4 × 10−4 torr in vacuum. The characteristics of the deposited AlN thin films were studied by x-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), secondary ion mass spectrometry (SIMS), and electronic spectroscopy for chemical analysis (ESCA). The surface roughness was also measured. It was found that AlN films prepared by DIBS at room temperature are better than those prepared at 300°C, and those prepared with an Al target are better than those prepared with an AlN target. The inferiority of AlN films prepared with AlN targets is due to the AlN bond being broken down by the ion beam source.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Metal and Thin Film Mechanics · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Caliendo C., Saggio G., Verardi P., Verona E. (1993) IEEE 1:249
2. Dumitru V., Cimpoiasu E., Morosanu C., Nenu C., Necsoiu D (1996) IEEE 2:641
3. Kerness N.D., Hossain T.Z., McGuire S.C. (1997) Appl. Radiat. Isot. 48:510.1016/S0969-8043(96)00127-3 ↗
4. Harper J.M.E., Cuomo J.J., Hentzell H.T.G. (1985) J. Appl. Phys. 58:55010.1063/1.335661 ↗
5. Shuji K., Taguchi Y.Y., Tsunemasa (1998) J. Cryst. Growth 189(190):223
6. Sun J., Wu J., Lin H., Shi W., Ying Z., Li F. (2001) Phys. Lett. A 280:38110.1016/S0375-9601(01)00087-1 ↗
7. Uehara K., Nakamura H., Nakase H., Tsubouchi K. (2002) IEEE 1:135
8. Nakamura F., Hashimoto S., Hara M., Imanaga S., Ikeda M., Kawai H. (1998) J. Cryst. Growth 195:28010.1016/S0022-0248(98)00668-X ↗
9. Ogawa T., Okamoto M., Mori Y., Sasaki T (1997) Appl. Surf. Sci. 113(114):5710.1016/S0169-4332(96)00827-6 ↗
10. Liu W.J., Wu S.J., Chen C.M., Lai Y.C., Chuang C.H. (2005) J. Cryst. Growth 276:52510.1016/j.jcrysgro.2004.11.421 ↗
11. Zhang J.X., Cheng H., Cheng Y.Z., Uddin A., Yuan S., Geng S.J., Zhang S. (2005) Surface Coating Technol. 198:6810.1016/j.surfcoat.2004.10.075 ↗
12. Figueroa U., Salas O., Oseguera J. (2005) Surface Coating Technol. 200:176810.1016/j.surfcoat.2005.08.051 ↗
13. Assoura M.B., Hakiki M. EI., Elmazria O., Alnot P., Tiusan C. (2004) Diamond Related Mater. 13:111110.1016/j.diamond.2003.11.064 ↗
14. Cheng L.L., Yu Y.H., Sundaravel B., Luo E.Z., Lin S., Lei Y.M. (2000) Nucl. Instrum. Meth. B 169:9410.1016/S0168-583X(00)00023-9 ↗
15. Jie Y., Yang C., Chen W., Xinshui Y., Kun T., Baixin L., Yudian F. (1993) Appl. Phys. Lett. 62:279010.1063/1.109210 ↗
16. Netterfield R.P., Müller K.-H., McKenzie D.R., Goonan M.J., Martin P.J. (1988) J. Appl. Phys. 63:76010.1063/1.340068 ↗
17. Aspar B., Rodriguez Clemente R., Figueras A., Armas B., Combescure C. (1993) J. Cryst. Growth 129:5610.1016/0022-0248(93)90433-W ↗
18. Lee W.J., Soh J.W., Jang S.S., Jeong I.S. (1996) Thin Solid Films 279:1710.1016/0040-6090(95)08027-9 ↗
19. Meng W.J., Sell J.A., Perry T.A., Rehn L.E., Baldo P.M. (1994) J. Appl. Phys. 75:344610.1063/1.356105 ↗
20. Roy R.A., Yee D.S., Cuomo J.J. (1989) Mater. Res. Soc. Symp. Proc. 128:2310.1557/PROC-128-23 ↗
21. Harper J.M.E., Cuomo J.J., Hentzell H.T.G. (1983) Appl. Phys. Lett. 43:54710.1063/1.94414 ↗
22. Ribeiro C.T.M., Alvarez F., Zanatta A.R. (2002) Appl. Phys. Lett. 81:100510.1063/1.1498002 ↗
23. Zhao Y.N., Wang B., He Z. (1997) Vacuum 48:42710.1016/S0042-207X(97)00001-8 ↗