Effect of Sn Doping on the Thermoelectric Properties of n-type Bi2(Te,Se)3 Alloys
Source abstract
Abstract
In the present work, 0.01–0.05wt.% Sn-doped Bi2(Te0.9Se0.1)3 alloys were prepared by mechanical deformation followed by hot pressing, and their thermoelectric properties were studied. We observed that the Sn element is a very effective dopant as an acceptor to control the carrier concentration in the n-type Bi2(Te0.9Se0.1)3 alloys to optimize their thermoelectric property. The n-type carrier concentration can be controlled from 4.2 × 1019/cm3 to 2.4 × 1019/cm3 by 0.05wt.% Sn-doping. While the Seebeck coefficient and the electrical resistivity are both increased with doping, the power factor remains the same. Therefore, we found that the thermoelectric figure-of-merit becomes maximized at 0.75 when the thermal conductivity has a minimum value for the 0.03wt.% Sn-doped sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Thermodynamics and Statistical Mechanics · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. B.C. Sales, Science 295, 1248 (2002).10.1126/science.1069895 ↗
2. L.E. Bell, Science 321, 1457 (2008).10.1126/science.1158899 ↗
3. J. Jiang, L. Chen, Q. Yao, S. Bai, and Q. Wang, Mater. Chem. Phys. 92, 39 (2005).10.1016/j.matchemphys.2004.12.028 ↗
4. D.B. Hyun, J.S. Hwang, B.C. You, T.S. Oh, and C.W. Hwang, J. Mater. Sci. 33, 5595 (1998).10.1023/A:1004460030657 ↗
5. M.H. Ettenberg, J.R. Maddux, P.J. Taylor, W.A. Jesser, and F.D. Rosi, J. Cryst. Growth 179, 495 (1997).10.1016/S0022-0248(97)00133-4 ↗
6. J.P. Fleurial, L. Gailliard, R. Triboulet, H. Scherrer, and S. Scherrer, J. Phys. Chem. Solids 49, 1237 (1988).10.1016/0022-3697(88)90182-5 ↗
7. J.R. Daabble and C.H.L. Goodman, J. Phys. Chem. Solids 5, 142 (1958).10.1016/0022-3697(58)90139-2 ↗
8. D.H. Lee, J.U. Lee, S.J. Jung, S.H. Baek, J.H. Kim, D.I. Kim, D.B. Hyun, and J.S. Kim, J. Electron. Mater. 43, 2255 (2014).10.1007/s11664-014-3037-1 ↗
9. T.S. Oh, D.B. Hyun, and N.V. Kolomoets, Scr. Mater. 42, 849 (2000).10.1016/S1359-6462(00)00302-X ↗
10. X.A. Fan, J.Y. Yang, W. Zhu, H.S. Yun, R.G. Chen, S.Q. Bao, and X.K. Duan, J. Alloys Compd. 420, 256 (2006).10.1016/j.jallcom.2005.10.025 ↗
11. J.Y. Yang, T. Aizawa, A. Yamamoto, and T. Ohta, J. Alloys Compd. 312, 326 (2000).10.1016/S0925-8388(00)01159-2 ↗
12. X.A. Fan, G.Q. Li, W. Zhong, X.K. Duan, and J.Y. Yang, Integr. Ferroelectr. 1128, 1 (2011).10.1080/10584587.2011.576164 ↗
13. L.X. Dong and Y.H. Park, Mater. Trans. 43, 681 (2002).10.2320/matertrans.43.681 ↗
14. G.E. Lee, I.H. Kim, Y.S. Lim, W.S. Seo, B.J. Choi, and C.W. Hwang, J. Electron. Mater. 43, 1650 (2014).10.1007/s11664-013-2822-6 ↗
15. P. Pecheur and G. Toussaint, J. Phys. Chem. Solids 55, 327 (1994).10.1016/0022-3697(94)90229-1 ↗
16. S.J. Jung, J.H. Kim, D.I. Kim, S.K. Kim, H.H. Park, J.S. Kim, D.B. Hyun, and S.H. Baek, Phys. Chem. Chem. Phys. 16, 3529 (2014).10.1039/c3cp54969k ↗
17. S.J. Jung, S.K. Kim, H.H. Park, D.B. Hyun, S.H. Baek, and J.S. Kim, J. Nanomater. 2013, 6 (2013).
18. D.M. Lee, C.H. Lim, D.C. Cho, Y.S. Lee, and C.H. Lee, J.␣Electron. Mater. 35, 360 (2006).10.1007/BF02692457 ↗
19. T.C. Harman, J.H. Cahn, and M.J. Logan, J. Appl. Phys. 30, 1351 (1959).10.1063/1.1735334 ↗
20. W.S. Liu, Q. Zhang, Y. Lan, S. Chen, X. Yan, Q. Zhang, H. Wang, D. Wang, G. Chen, and Z. Ren, Adv. Energy Mater. 1, 577 (2011).10.1002/aenm.201100149 ↗
21. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008).10.1038/nmat2090 ↗