journal article·2014-11

Structural and Electrical Properties of Ta ax La(1−a)x O y Thin Films

Zahra Khorshidi, Ali Bahari, Reza Gholipur

Journal of Electronic Materials· Volume 43· Issue 11
Publisher page

Abstract

Effect of annealing temperature on the characteristics of sol–gel-driven TaaxLa(1−a)xOy thin film spin-coated on Si substrate as a high-k gate dielectric was studied. TaaxLa(1−a)xOy thin films with different amounts of a were prepared (as-prepared samples). X-ray diffraction measurements of the as-prepared samples indicated that Ta0.3xLa0.7xOy film had an amorphous structure. Therefore, Ta0.3xLa0.7xOy film was chosen to continue the present studies. The morphology of Ta0.3xLa0.7xOy films was studied using scanning electron microscopy and atomic force microscopy techniques. The obtained results showed that the size of grain boundaries on Ta0.3xLa0.7xOy film surfaces was increased with increasing annealing temperature. Electrical and optical characterizations of the as-prepared and annealed films were investigated as a function of annealing temperature using capacitance–voltage (C–V) and current density–voltage (J–V) measurements and the Tauc method. The obtained results demonstrated that Ta0.3xLa0.7xOy films had high dielectric constant (≈27), wide band gap (≈4.5 eV), and low leakage current density (≈10−6 A/cm2 at 1 V).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A. Bahari and R. Ghlipur, J. Electron. Mater. 42, 3529 (2013).10.1007/s11664-013-2772-z ↗
2. A. Bahari and R. Gholipur, Int. J. Mod. Phys. B 26, 1250191 (2012).10.1142/S0217979212501913 ↗
3. J.A. Ng, Y. Kuroki, N. Sugii, K. Kakushima, S.I. Ohmi, K. Tsutsui, T. Hattori, H. Iwai, and H. Wong, Microelect. Eng. 80, 206 (2005).10.1016/j.mee.2005.04.019 ↗
4. Y.C. Yeo, P. Ranade, T.J. King, and C. Hu, IEEE Electron Device Lett. 23, 342 (2002).10.1109/LED.2002.1004229 ↗
5. A. Bahari and M. Riazian, Int. J. Chem. Tech. Res. 2, 1167 (2010).
6. A. Bahari and R. Gholipur, Int. J. Green Nanotechnol. 4, 225 (2012).10.1080/19430892.2012.706096 ↗
7. A. Bahari and R. Gholipur, Ferroelectrics 437, 62 (2012).10.1080/00150193.2012.741938 ↗
8. R.P. Ortiz, A. Facchetti, and T.J. Marks, Chem. Rev. 110, 205 (2010).10.1021/cr9001275 ↗
9. M. Bhat, L.K. Han, D. Wristers, J. Yan, D.L. Kwong, and J. Fulford, Appl. Phys. Lett. 66, 1225 (1995).10.1063/1.113244 ↗
10. M. Zaharescu, V.S. Teodorescu, M. Gartner, M.G. Blanchin, A. Barau, and M. Anastasescu, J. Noncryst. Solids 354, 409 (2008).10.1016/j.jnoncrysol.2007.07.097 ↗
11. M.H. Chowdhury, M.A. Mannan, and S.A. Mahmood, Int. J. EME Tech. Sci. Eng. 2, 1 (2010).10.7763/IJET.2010.V2.91 ↗
12. D. Tsoutsou, G. Scarel, A. Debernardi, S.C. Capelli, S.N. Volkos, L. Lamagna, S. Schamm, P.E. Coulon, and M. Fanciulli, Microelect. Eng. 85, 2411 (2008).10.1016/j.mee.2008.09.033 ↗
13. J. Robertson, Eur. Phys. J. Appl. Phys. 28, 265 (2004).10.1051/epjap:2004206 ↗
14. J. Liu, A. Wel, X. Zhao, and H. Zhang, Bull. Mater. Sci. 34, 443 (2011).10.1007/s12034-011-0106-4 ↗
15. K. Xiong, J. Robertson, and S.J. Clark, J. Appl. Phys. 102, 83710 (2007).10.1063/1.2798910 ↗
16. Y. Zhu, F. Yu, Y. Man, Q. Tian, Y. He, and N. Wu, J. Solid State Chem. 178, 224 (2005).10.1016/j.jssc.2004.11.015 ↗
17. K.S. Ahn and Y.E. Sung, J. Vac. Sci. Technol. A 19, 2840 (2001).10.1116/1.1409377 ↗
18. A. Bahari, R. Gholipur, and M. Derakhshi, Int. J. Mod. Phys. B 27, 1350153 (2013).10.1142/S0217979213501531 ↗
19. R.E. Mallawany, M.D. Abdalla, and I.A. Ahmed, Mater. Chem. Phys. 109, 291 (2008).10.1016/j.matchemphys.2007.11.040 ↗