journal article·2007-02-08Open access

Effects of Solder Volume on Formation and Redeposition of Au-Containing Intermetallics in Ni/Au-SnAgCu-Ni(P) Solder Joints

H.T. Chen, C.Q. Wang, C. Yan, Y. Huang, Y.H. Tian

Journal of Electronic Materials· Volume 36· Issue 1

Abstract

SnAgCu is one of the most promising candidates for lead-free solders to replace conventional eutectic SnPb solders. The effects of solder volume on interfacial reactions and microstructure evolution in Ni/Au-SnAgCu-Ni(P) solder joints have been investigated under soldering and thermal aging conditions. The results show that solder volume has a strong effect on the formation of Au-containing intermetallic compounds (IMCs) and their redeposition at the interfaces. The size and volume fraction of Au-containing IMCs dispersed in the solder bulk increased with decreasing solder joint dimensions. For the small solder joint with 300-μm solder ball, the (Au,Ni)Sn4 IMCs redeposited to the interfaces after thermal aging at 150°C for 9 days, but this was not observed for the other two solder joints with large solder volume. These results also indicate that the redeposition of (Au,Ni)Sn4 is closely associated with the migration of Cu toward the interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Abtew M., Selvaduray G., (2000) Mater. Sci. Eng. R27: 9510.1016/S0927-796X(00)00010-3 ↗
2. Zeng K., Tu K.N., (2002) Mater. Sci. Eng. R38: 5510.1016/S0927-796X(02)00007-4 ↗
3. Chang K.C., Chiang K.N., (2004) J. Electr. Mater. 33: 137310.1007/s11664-004-0167-x ↗
4. Islam M.N., Sharif A., Chan Y.C., (2005) J. Electr. Mater. 34: 14310.1007/s11664-005-0225-z ↗
5. Z. Mei, M. Kaufmann, A. Eslambolchi, and P. Johnson, Proc. 48th Electronic Components and Technology Conf. (Piscataway NJ: IEEE, 1998), pp. 952–961
6. Minor A.M., Morris J.M. Jr., (2000) Metall. Mater. Trans. A 31A: 79810.1007/s11661-000-0022-5 ↗
7. Laurila T., Vuorinen V., Mattila T., Kivilahti J.K., (2005) J. Electr. Mater. 34: 10310.1007/s11664-005-0186-2 ↗
8. Shiau L.C., Ho C.E., Kao C.R., (2002) Soldering Surf. Mount Technol. 14: 2510.1108/09540910210444692 ↗
9. Lee K.Y., Li M., (2001) Metall. Mater. Trans. A 32A: 266610.1007/s11661-001-0058-1 ↗
10. Ho C.E., Tsai R.Y., Lin Y.L., Kao C.R., (2002) J. Electr. Mater. 31: 58410.1007/s11664-002-0129-0 ↗
11. P.G. Kim and K.N. Tu, Mater. Chem. Phys. 53, 1998, 165 (2001)10.1016/S0254-0584(97)02076-2 ↗
12. Park J.Y., Kabade R., Kim C.U., Carper T., Dunford S., Puligandla V., (2003) J. Electr. Mater. 32: 147410.1007/s11664-003-0117-z ↗
13. He M., Chen Z., Qi G.J., (2004) Acta Mater. 52: 204710.1016/j.actamat.2003.12.042 ↗
14. Jang J.W., Kim P.G., Tu K.N., Frear D.R., Thompson P., (1999) J. Appl. Phys. 85: 845610.1063/1.370627 ↗
15. C.E. Ho, Y.W. Lin, S.C. Yang, and C.R. Kao, IEEE Proc. Int. Symp. on Advanced Packaging Materials: Processes, Properties and Interfaces (Piscataway, NJ: IEEE, 2005), pp. 39–44
16. Ho C.E., Lin Y.W., Yang S.C., Kao C.R., Jiang D.S., (2006) J. Electr. Mater. 35: 101710.1007/BF02692562 ↗
17. Frederikse H.P.R., Fields R.J., Feldman A., (1992) J. Appl. Phys. 72: 287910.1063/1.351487 ↗
18. Ho C.E., Shiau L.C., Kao C.R., (2002) J. Electr. Mater. 31: 126410.1007/s11664-002-0019-5 ↗
19. Thermodynamic Databank for Interconnection and Packaging Materials (IPMA) (Helsinki: Laboratory of Electronics Production Technology, 2004)
20. Ho C.E., Zheng R., Luo G.L., Lin A.H., Kao C.R., (2000) J. Electr. Mater. 29: 117510.1007/s11664-000-0010-y ↗