journal article·2014-06

Encapsulated Thermoelectric Modules for Advanced Thermoelectric Systems

Mitsuru Kambe, Takahiro Jinushi, Zenzo Ishijima

Journal of Electronic Materials· Volume 43· Issue 6
Publisher page

Abstract

An encapsulated thermoelectric (TE) module consists of a vacuum-tight stainless-steel container in which an SiGe or BiTe TE module is encapsulated. This construction enables maximum performance and durability because: the thermal expansion mismatch between the hot and cold sides of the container can be accommodated by a sliding sheet in the container; the TE module inside is always kept in a vacuum environment, therefore no oxidation can occur; and the pressure difference between the inside and outside of the container reduces thermal contact resistance inside the container. Our encapsulated SiGe module features higher operating temperature—up to 650°C for both hot and cold sides. Other high-temperature modules and conventional BiTe modules, including both-sides and one-side skeleton types, have been encapsulated. Several variants of the encapsulated module are available. Encapsulated thermoelectric modules with integrated coolers contain cooling panels through which water can pass. If the module hot side is heated by a radiating heat source (radiation coupling) or convection of a hot gas or fluid (convection coupling), no pressing force on the module is necessary. It therefore features minimum contact resistance with the cooling duct, because no pressure is applied, maximum TE power, and minimum installation cost. Another, larger, variant is a quadruple flexible container in which four modules (each of maximum size 40 mm × 40 mm) are encapsulated. These encapsulated modules were used in a powder metallurgy furnace and were in use for more than 3000 h. Application to cryogenic temperatures simulating the liquid nitrogen gas vaporizer has been also attempted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heat Transfer and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. M. Kambe and H. Shikata, Acta Astronaut. 51, 161 (2002).10.1016/S0094-5765(02)00071-1 ↗
2. M. Kambe, H. Tsunoda, K. Nakajima, and T. Iwamura, J. Power Energy 218, 335 (2004).10.1243/0957650041562190 ↗
3. M. Kambe, H. Tsunoda, K. Mishima, and T. Iwamura, Nucl. Technol. 143, 11 (2003).10.13182/NT03-A3394 ↗
4. M. Kambe, T. Jinushi, and Z. Ishijima, Proceedings for ICT/ECT2009, Freiburg, July 2009.
5. M. Kambe, T. Jinushi, and Z. Ishijima, J. Electron. Mater. 39, 1418 (2010).10.1007/s11664-010-1315-0 ↗
6. M. Kambe, R. Morita, K. Omoto, Y. Koji, T. Yoshida, and K. Noishiki, JPES 2, 1304 (2008).10.1299/jpes.2.1304 ↗
7. M. Kambe, R. Morita, K. Omoto, Y. Koji, T. Yoshida, and K. Noishiki, JPES 4, 12 (2010).10.1299/jpes.4.12 ↗