journal article·2012-09Open access

Measurement of Thermal Conductivity Using Steady-State Isothermal Conditions and Validation by Comparison with Thermoelectric Device Performance

Patrick J. Taylor, Jay R. Maddux, Parvez N. Uppal

Journal of Electronic Materials· Volume 41· Issue 9

Abstract

A new technique for measuring thermal conductivity with significantly improved accuracy is presented. By using the Peltier effect to counterbalance an imposed temperature difference, a completely isothermal, steady-state condition can be obtained across a sample. In this condition, extraneous parasitic heat flows that would otherwise cause error can be eliminated entirely. The technique is used to determine the thermal conductivity of p-type and n-type samples of (Bi,Sb)2(Te,Se)3 materials, and thermal conductivity values of 1.47 W/m K and 1.48 W/m K are obtained respectively. To validate this technique, those samples were assembled into a Peltier cooling device. The agreement between the Seebeck coefficient measured individually and from the assembled device were within 0.5%, and the corresponding thermal conductivity was consistent with the individual measurements with less than 2% error.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Thermodynamics and Statistical Mechanics · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. H. Wang, S. Bai, H. Böttner, L. Chen, F. Harris, L. Kiss, H. Kleinke, J. Konig, J. Lo, A. Mayolet, W. Porter, J. Sharp, C. Smith, and T. Tritt, International Energy Agency Report: Transport Properties of Bulk Thermoelectrics. ORNL Report #32716 (2011), p. 15.
2. E.H. Putley, Proc. Phys. Soc. B 68, 35 (1955).10.1088/0370-1301/68/1/306 ↗
3. T.C. Harman, J.H. Cahn, and M.J. Logan, J. Appl. Phys. 30, 1351 (1959).10.1063/1.1735334 ↗
4. A.W. Penn, J. Sci. Instrum. 41, 626 (1964).10.1088/0950-7671/41/10/311 ↗
5. A. Bowley, L. Cowles, G. Williams, and H.J. Goldsmid, J. Sci. Instrum. 38, 433 (1961).10.1088/0950-7671/38/11/309 ↗
6. R.J. Buist, Proc. 11th International Conference on Thermoelectrics, (1992).
7. P.J. Taylor, W.A. Jesser, F.D. Rosi, and Z. Derzko, Semiconduc. Sci. Technol. 12, 443 (1997).10.1088/0268-1242/12/4/018 ↗
8. P.J. Taylor, J.R. Maddux, W.A. Jesser, and F.D. Rosi, J. Appl. Phys. 85, 7807 (1999).10.1063/1.370589 ↗
9. H.J. Goldsmid, Proc. Phys. Soc. B69, 203 (1956).10.1088/0370-1301/69/2/310 ↗
10. P.J. Taylor, T.C. Harman, N.K. Dhar, P.S. Wijewarnasuriya, J.C. Fraser, and M.Z. Tidrow, Appl. Phys. Lett. 85, 5415 (2004).10.1063/1.1825056 ↗
11. S. Iwanaga, E. Toberer, A. LaLonde, and G. Snyder, Rev. Sci. Instrum. 82, 063905 (2011).10.1063/1.3601358 ↗