Synthesis and Optical Properties of Eu2+ and Eu3+ Doped SrBP Phosphors Prepared by Using a Co-precipitation Method for White Light-Emitting Devices
Source abstract
Abstract
The Eu3+ and Eu2+-doped SrBP phosphor powders were synthesized via the co-precipitation method and subsequent reduction of the dopants in N2/H2 gas for application in white light-emitting devices (WLED). The as-prepared powders were annealed at a temperature range of 600°C to 1300°C in air ambient to form Eu3+-doped phosphors with an average particle size in the range of 100 nm to 1 μm. The phosphors were then reduced in the forming gas (90%N2:10%H2) to achieve Eu2+-doped phosphors. It has been found that typical phases of Sr6P5BO20, Sr2P2O7, and Sr3(PO4)2 co-exist in the as-prepared powders. The strong and narrow orange-red emission from 570 nm to 700 nm in the photoluminescence spectra (PL) of the SrBP:Eu3+ phosphors are attributed to the 5D0 → 7Fj transitions of Eu3+ ion (where j gets the value of 1 to 6). In contrast, the broad luminescence band of the SrBP:Eu2+ phosphors in the range of 400 nm to 500 nm are attributed to the 5d–4f transitions of Eu2+ ion in the same host crystal. The Eu3+/Eu2+-doped SrBP phosphors are considered to be promising phosphors for WLED. The co-precipitation method is simple and rapid, but allows for the controlling of particle size and composition with ease.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Radiation Detection and Scintillator Technologies · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. K. Sohn, S.H. Cho, S.S. Park, and N. Shin, Appl. Phys. Lett. 89, 051106 (2006).10.1063/1.2245218 ↗
2. B.M.J. Smets, Mater. Chem. Phys. I6, 283 (1987).10.1016/0254-0584(87)90103-9 ↗
3. D.Y. Wang, C.H. Huang, Y.C. Wu, and T.M. Chen, J. Mater. Chem. 21, 10818 (2011).10.1039/c1jm00080b ↗
4. W. Lü, Y.S. Luo, Z.D. Hao, X. Zhang, X.J. Wang, and J.H. Zhang, J. Lumin. 132, 2439 (2012).10.1016/j.jlumin.2012.04.016 ↗
5. D. Hou, X. Xu, M. Xie, and H. Liang, J. Lumin. 146, 18 (2014).10.1016/j.jlumin.2013.09.041 ↗
6. H.V. Bui, T. Nguyen, M.C. Nguyen, T.A. Tran, H.L. Tien, H.T. Tong, T.K.L. Nguyen, and T.H. Pham, Advances in Natural Sciences: Nanoscience and Nanotechnology, vol. 6 (3), 035013 (2015).
7. H.V. Bui, T.H. Pham, N.K. Tran, N.T.T. Nguyen, and D.H. Pham, J. Phys: Conf. Ser. 187, 012074 (2009).
8. K. Murakami, J. Narito, Y. Anzai, H. Itoh, S. Doi, and K. Awazu, J. Illuminesc. Eng. Jpn. 3, 6 (1979).
9. V.R. Kharabe, S.J. Dhoble, and S.V. Moharil, J. Phys. D Appl. Phys. 41, 205413 (2008).10.1088/0022-3727/41/20/205413 ↗
10. Y. Komatsu, A. Komeno, K. Toda, K. Uematsu, and M. Sato, J. Alloy. Compd. 408–412, 903 (2006).10.1016/j.jallcom.2005.01.098 ↗
11. D. Hou, C.-G. Ma, H. Liang, and M.G. Brik, ECS J. Solid State Sci. Technol. 3, R39 (2014).10.1149/2.007404jss ↗
12. M. Zhang, J. Wang, W. Ding, Q. Zhang, and Q. Su, Appl. Phys. B 86, 647 (2007).10.1007/s00340-006-2535-0 ↗
13. H. Ehrenberg, S. Laubach, P.C. Schmidt, R. McSweeney, M. Knapp, and K.C. Mishra, J. Solid State Chem. 179, 968 (2006).10.1016/j.jssc.2005.12.033 ↗
14. N. Shin, J.Y. Kim, D. Ahn, and K.S. Sohn, Acta Cryst. C 61, i54 (2005).10.1107/S0108270105009819 ↗
15. S. Ye, Z.S. Liu, J.G. Wang, and X.P. Jing, Mater. Res. Bull. 43, 1057 (2008).10.1016/j.materresbull.2007.07.039 ↗
16. K.V.-D. Eeckhout, P.F. Smet, and D. Poelman, Materials 3, 2536 (2010).10.3390/ma3042536 ↗