Improved Ni Schottky Contacts on n-Type 4H-SiC Using Thermal Processing
Source abstract
Abstract
High-temperature processing was used to improve the barrier properties of three sets of n-type 4H-SiC Schottky diodes fabricated with Ni Schottky contacts. We obtained an optimum average barrier height of 1.78 eV and an ideality factor of 1.09 using current–voltage measurements on diodes annealed in vacuum at 500°C for 24 h. Nonannealed contacts had an average barrier height of 1.48 eV and an ideality factor of 1.85. The Rutherford backscattering spectra of the Ni/SiC contacts revealed the formation of a nickel silicide at the interface, accompanied by a substantial reduction in oxygen following annealing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. J. A. Cooper, M. R. Melloch, R. Singh, A. Agarwal, J. W. Palmour. Status and prospects for SiC power MOSFETs. IEEE Trans. Electron. Dev. 49(4), 658–63 (2002). doi: 10.1109/16.99287610.1109/16.992876 ↗
2. R. Singh, J. A. Cooper, M. R. Melloch, T. P. Chow, J. W. Palmour. SiC power Schottky and pin diodes. IEEE Trans. Electron. Dev. 49(4), 665–671 (2002). doi: 10.1109/16.99287710.1109/16.992877 ↗
3. C. I. Harris, A. O. Konstantinov, Phys. Scr. T79, 27 (1999).doi: 10.1238/Physica.Topical.079a0002710.1238/Physica.Topical.079a00027 ↗
4. A. Agarwal, R. Singh, S.H. Ryu, J. Richmond, C. Capell, S. Schwab, B. Moore, and J. Palmour, From http://www.cree.com/products/pdf/PWRTechnicalPaper1.pdf . Accessed on April 18, 2008.
5. X. Ma, P. Sadagopan, and T. S. Sudarshan, Phys. Status Solidi A 203, 643 (2006).doi: 10.1002/pssa.20052101710.1002/pssa.200521017 ↗
6. M. Holz, G. Hultsch, T. Scherg, R. Rupp. Microelectronics Reliability 47 1741–1745 (2007).doi: 10.1016/j.microrel.2007.07.03110.1016/j.microrel.2007.07.031 ↗
7. M. Sochacki, A. Kolendo, J. Szmidt, A. Werbowy. Solid-State Electronics 49, 585–595 (2005). doi: 10.1016/j.sse.2005.01.01510.1016/j.sse.2005.01.015 ↗
8. K. J. Schoen, J. M. Woodall, J. A. Cooper, and M. R. Melloch, IEEE Trans. Electron. Dev. 45, 1595 (1998).doi: 10.1109/16.70149410.1109/16.701494 ↗
9. L. Porter and R.F. Davis, Mater. Sci. Eng. B 34, 83 (1995).doi: 10.1016/0921-5107(95)01276-110.1016/0921-5107(95)01276-1 ↗
10. F. Roccaforte, F. La Via, V. Raineri, R. Pierobon, and E. Zanoni, J. Appl. Phys. 93, 9137–9144 (2003).doi: 10.1063/1.157375010.1063/1.1573750 ↗
11. F. La Via, G. Galvagno, A. Firrincieli, S. Di Franco, A.Severino, S. Leone, M. Mauceri, G. Pistone, G. Abbondanza, F. Portuese, L. Calcagno, and G. Foti. Mater. Res. Soc. Symp. Proc. 911, B02–01 (2006)
12. A. Ohi, J. Labis, Y. Morikawa, T. Fujiki, M. Hirai, M. Kusaka, M. Iwami, Appl. Surf. Sci. 190, 366–370 (2002). doi: 10.1016/S0169-4332(01)00860-110.1016/S0169-4332(01)00860-1 ↗
13. Y. Cao, L. Nyborg, U. Jelvestam, D. Yi. Appl. Surf. Sci. 241, 392–402 (2005). doi: 10.1016/j.apsusc.2004.07.05210.1016/j.apsusc.2004.07.052 ↗
14. E. H. Rhoderick and R. H. Williams, Metal-Semiconductor Contacts (Claredon, Oxford, 1988)
15. S. M. Sze, Physics of Semiconductor Devices, 2nd Ed., (Wiley, New York, 1981).
16. A. Itoh, T. Kimoto, and H. Matsunami, IEEE Electron Device Lett. 16, 280 (1995).doi: 10.1109/55.79073510.1109/55.790735 ↗
17. W. Mönch, J. Vac. Sci. Technol. B 17(4), 1867–1876 (1999). doi: 10.1116/1.59083910.1116/1.590839 ↗
18. R. F. Schmitsdorf, T. U. Kampen, and W. Mönch, J. Vac. Sci. Technol. B 15, 1221 (1997).doi: 10.1116/1.58944210.1116/1.589442 ↗
19. R. F. Schmitsdorf, T. U. Kampen, and W. Mönch, Surf. Sci. 324, 249 (1995) doi: 10.1016/0039-6028(94)00791-810.1016/0039-6028(94)00791-8 ↗
20. D. K. Schroder, Semiconductor Material and Device Characterization, (John Wiley and Sons Inc., 1990)
21. Yu. A. Goldberg, M. Levinshtein and S. L.Rumyantsev, in “Properties of advanced semiconductor materials: GaN, AlN, InN, BN, SiC, SiGe” Chapter 5 (Silicon Carbide), edited by Michael E. Levinshtein, Sergey L. Rumyantsev, Michael S. Shur, (John Wiley & Sons, Inc. New York -Chichester-Weinheim-Brisbane-Singapore-Toronto, 2001)
22. S. Huang, Yun Tian, Fang Lu. Appl. Surf. Sci 234, 362–368 (2004). doi: 10.1016/j.apsusc.2004.05.14810.1016/j.apsusc.2004.05.148 ↗
23. F. Roccaforte, F. La Via, A. Baeri, and V. Raineri, L. Calcagno and F. Mangano. J. Appl. Phys. 96(8), 4313–4318 (2004). doi: 10.1063/1.178713810.1063/1.1787138 ↗
24. D. M. Martin, J. Enlund, V. Yantchev, J. Olsson and I. Katardjiev. Journal of Physics: Conference Series. 100(4), 042014(2008).10.1088/1742-6596/100/4/042014 ↗
25. S. Y. Han, K. H. Kim, J. K. Kim, H. W. Jang, K. H. Lee, N. K. Kim, E. D. Kim, and J. L. Lee. Appl. Phys. Lett. 79, 1816–1818 (2001). doi: 10.1063/1.140499810.1063/1.1404998 ↗
26. M. O. Aboelfotoh and J. P. Doyle, Phys. Rev. B 59, 10823 (1999).doi: 10.1103/PhysRevB.59.1082310.1103/PhysRevB.59.10823 ↗