journal article·2006-05

Characterization of small-sized eutectic Sn-Bi solder bumps fabricated using electroplating

Hoe-Rok Jung, Hyuk-Hwan Kim, Won-Jong Lee

Journal of Electronic Materials· Volume 35· Issue 5
Publisher page

Abstract

We studied the effects of the cooling rate during the reflow process on the microstructure of eutectic Sn-Bi solder bumps of various sizes fabricated by electroplating. To fabricate eutectic Sn-Bi solder bumps of less than 50 µm in diameter, Sn-Bi alloys were electroplated on Cu pads and reflowed at various cooling rates using the rapid thermal annealing system. The interior microstructure of electroplated bumps showed a fine mixture of Sn-rich phases and Bi-rich phases regardless of the cooling rate. Such an interior microstructure of electroplated bumps was quite different from the reported microstructure of vacuum-evaporated bumps. Ball shear tests were performed to study the effects of the cooling rate on the shear strength of the solder bumps and showed that the shear strength of the bumps increased with increasing cooling rate probably due to the reduced grain size. Soft fractures inside the solder bump were observed during the ball shear test regardless of the cooling rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Z. Mei and J.W. Morris,J. Electron. Mater. 21, 599 (1992).10.1007/BF02655427 ↗
2. P. Elenius,Proceedings of the 2nd Pan-Pacific Microelectronics Symposium (Edina, MN: SMTA, 1997), pp. 345–349.
3. S.K. Kang and A.K. Sarkhel,J. Electron. Mater. 23, 701 (1994).10.1007/BF02651362 ↗
4. K. Seelig and D. Suraski,Proceedings of the 50th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2000), pp. 1405–1409.
5. M.R. Harrison and J.H. Vincent,Soldering Surf. Mount Technol. 13, 21 (2001).10.1108/09540910110407388 ↗
6. E. Hashino, K. Shimokawa, Y. Yamamoto, and K. Tatsumi,Proceedings of the 51st Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2001), pp. 957–964.
7. Y.J. Park, N.M. Hwang, and D.Y. Yoon,Mater. Sci. Forum 204–206, 411 (1996).10.4028/www.scientific.net/MSF.204-206.411 ↗
8. M.S. Suh (Ph.D. thesis, Korean Advanced Institute of Science and Technology, 2000).
9. U.B. Kang and Y.H. Kim,J. Electron. Mater. 33, 61 (2004).10.1007/s11664-004-0295-3 ↗
10. S.Y. Jang and K.W. Paik,Proceedings of the 50th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2000), pp. 64–68.