Thermoelectric Characteristics of p-Type (Bi,Sb)2Te3/(Pb,Sn)Te Functional Gradient Materials with Variation of the Segment Ratio
Source abstract
Abstract
The p-type (Bi,Sb)2Te3/(Pb,Sn)Te functional gradient materials (FGMs) were fabricated by hot-pressing mechanically alloyed (Bi0.2Sb0.8)2Te3 and 0.5 at.% Na2Te-doped (Pb0.7Sn0.3)Te powders together at 500°C for 1 h in vacuum. Segment ratios of (Bi,Sb)2Te3 to (Pb,Sn)Te were varied as 3:1, 1.3:1, and 1:1.6. A reaction layer of about 350-μm thickness was formed at the (Bi,Sb)2Te3/(Pb,Sn)Te FGM interface. Under temperature differences larger than 340°C applied across a specimen, superior figures of merit were predicted for the (Bi,Sb)2Te3/(Pb,Sn)Te FGMs to those of (Bi0.2Sb0.8)2Te3 and (Pb0.7Sn0.3)Te. With a temperature difference of 320°C applied across a specimen, the (Bi,Sb)2Te3/(Pb,Sn)Te FGMs with segment ratios of 3:1 and 1.3:1 exhibited the maximum output powers of 72.1 mW and 72.6 mW, respectively, larger than the 63.9 mW of (Bi0.2Sb0.8)2Te3 and the 26 mW of 0.5 at.% Na2Te-doped (Pb0.7Sn0.3)Te.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Phase-change materials and chalcogenides · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. M. A. Ryan and J-P. Fleurial, Electochem. Soc. Interface, 11, 30 (2002).10.1149/2.F04022IF ↗
2. B. Poudel, Q. Hao, Y. Ma, Y. Lan, A. Minnich, B. Yu, X. Yan, D. Wang, A. Muto, D. Vashaee, X. Chen, J. Liu, M. S. Dresselhaus, G. Chen, and Z. Ren, Science, 320, 634 (2008). doi: 10.1126/science.1156446 .10.1126/science.1156446 ↗
3. W. Kim, J. Zide, A. Gossard, D. Klenov, S. Stemmer, A. Shakouki, and A. Majumdar, Phys. Rev. Lett., 96, 045901 (2006). doi: 10.1103/PhysRevLett.96.045901 .10.1103/PhysRevLett.96.045901 ↗
4. R. Venkatasubramanian, Phys. Rev. B 61, 3091 (2000). doi: 10.1103/PhysRevB.61.3091 .10.1103/PhysRevB.61.3091 ↗
5. X. Sun, Z. Zhang, and M. S. Dresselhaus, Appl. Phys. Lett. 74, 4005 (1999). doi: 10.1063/1.123242 .10.1063/1.123242 ↗
6. M. S. Dresselhaus, G. Chen, M. Y. Tang, R. Yang, H. Lee, D. Wang, Z. Ren, J-P. Fleurial, and P. Gogna, Adv. Mater., 19, 1 (2007). doi: 10.1002/adma.200600527 .10.1002/adma.200600527 ↗
7. B. Yoo, F. Xiao, K. N. Bozhilov, J. Herman, M. A. Ryan, N. V. Myung, Adv. Mater., 19, 296 (2007). doi: 10.1002/adma.200600606 .10.1002/adma.200600606 ↗
8. R. Venkatasubramanian, E. Siivola, T. Colpitts, B. O’Quinn, Nature, 413, 597 (2001). doi: 10.1038/35098012 .10.1038/35098012 ↗
9. T. C. Harman, P. J. Taylor, M. P. Walsh, B. E. Laforge, Science, 297, 2229 (2002). doi: 10.1126/science.1072886 .10.1126/science.1072886 ↗
10. T. Koga, S. B. Cronin, M. S. Dresselhaus, J. L. Liu, K. L. Wang, Appl. Phys. Lett. 77, 1490 (2000). doi: 10.1063/1.1308271 .10.1063/1.1308271 ↗
11. O. Yamashita and H. Odahara, J. Mater. Sci., 42, 5867 (2007). doi: 10.1007/s10853-006-1457-x .10.1007/s10853-006-1457-x ↗
12. K. Y. Lee and T. S. Oh, Mater. Sci. Forum, 534–536, 1493 (2007). doi: 10.4028/0-87849-419-7.1493 .10.4028/www.scientific.net/MSF.534-536.1493 ↗
13. M. Koshigoe, Y. Kudo, M. Hashimoto, I. Shiota, and I.A. Nishida, Proceedings of the 17th International Conference on Thermoelectrics (1998), p. 479.
14. J. L. Cui, Mater. Lett., 57, 4074 (2003). doi: 10.1016/S0167-577X(03)00268-4 .10.1016/S0167-577X(03)00268-4 ↗
15. T. C. Harman, J. H. Cahn and M. J. Logan, J. Appl. Phys., 30, 9 (1959). doi: 10.1063/1.1735334 .10.1063/1.1735334 ↗
16. G. J. Snyder and T. S. Ursell, Phys. Rev. Lett., 91, 148301 (2003). doi: 10.1103/PhysRevLett.91.148301 .10.1103/PhysRevLett.91.148301 ↗
17. G. J. Snyder, Appl. Phys. Lett., 84, 2436 (2004). doi: 10.1063/1.1689396 .10.1063/1.1689396 ↗