Effect of Aluminum Concentration on the Interfacial Reactions of Sn-3.0Ag-xAl Solders with Copper and ENIG Metallizations
Source abstract
Abstract
Aluminum was added into Sn-3.0Ag (wt.%) solder to investigate the effect of aluminum concentration on the interfacial reaction of Sn-3.0Ag-xAl solders with copper or electroless nickel immersion gold (ENIG) metallizations. Four different Sn-3.0Ag-xAl solders (x = 0 wt.%, 0.1 wt.%, 0.5 wt.%, and 1.0 wt.%) were used for comparison. It was found that the composition, morphology, and thickness of interfacial reaction products were strongly dependent on aluminum concentration. At low aluminum concentration (0.1 wt.%), the typical Cu6Sn5 layer was formed at the interface. When the aluminum concentration was 0.5 wt.%, a continuous CuAl2 layer spalled off from the interfacial Cu-Sn intermetallic compound (IMC) layer. Only a planar CuAl2 layer was observed at the interface when the aluminum concentration was increased to 1.0 wt.%. In Sn-Ag-Al/ENIG reactions, Ni3Sn4 was formed and spallation occurred near the interface in the Sn-3.0Ag and Sn-3.0Ag-0.1Al solder joints. When the aluminum concentration was higher than 0.1 wt.%, a thin planar AuAl compound formed at the interface. There was no P-rich phase formation that retarded the spalling phenomenon. The aluminum additive in Sn-Ag solder inhibited the growth of IMCs in the reaction with copper or ENIG metallizations, which was favorable for the reliability of solder joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. M. Abtew, G. Selvaduray. Mater. Sci. Eng. Rep. 27, 95 (2000) doi: 10.1016/S0927-796X(00)00010-310.1016/S0927-796X(00)00010-3 ↗
2. K. Suganuma. Curr. Opin. Solid State Mater. Sci. 5, 55 (2001) doi: 10.1016/S1359-0286(00)00036-X10.1016/S1359-0286(00)00036-X ↗
3. B. Ebersberger and R. Bauer, Proceedings of Electronic Components and Technology Conference 2004 (Las Vegas, NV, Jun. 2004), p. 683.
4. H.C. Kim, Proceedings Electronic Components and Technology Conference 2007 (Reno, NV, May 2007), p. 962.
5. D.W. Kim, Proceedings Electronic Components and Technology Conference 2007 (Reno, NV, May 2007), p. 1614.
6. T.T. Mattila, Proceedings Electronic Components and Technology Conference 2007 (Reno, NV, May 2007), p. 381.10.1109/ECTC.2007.373826 ↗
7. A. Syed, Proceedings Electronics Packaging Technology Conference 2006 (Singapore, Dec. 2006), p. 404.10.1109/EPTC.2006.342750 ↗
8. I.E. Anderson. J. Electron. Mater. 35, 94 (2006) doi: 10.1007/s11664-006-0190-110.1007/s11664-006-0190-1 ↗
9. T.C. Chiu, Proceedings Electronic Components Technology Conference 2004 (Las Vegas, NV, Jun. 2004), p. 1256.
10. K·S. Kim. Microelectron. Reliab. 43, 259 (2003) doi: 10.1016/S0026-2714(02)00239-110.1016/S0026-2714(02)00239-1 ↗
11. T.C. Chang. J. Cryst. Growth 250, 236 (2003) doi: 10.1016/S0022-0248(02)02252-210.1016/S0022-0248(02)02252-2 ↗
12. T. Junichi and S. Naoto, 10th Symposium on Microjoining and Assembly Technology in Electronics (Yokohama, Japan, Feb. 2004).
13. Y.C. Sohn, J. Yu, S.K. Kang, D.Y. Shih, W.K. Choi. J. Electron. Mater. 33, 790 (2004) doi: 10.1007/s11664-004-0243-210.1007/s11664-004-0243-2 ↗
14. J.Y. Song, J. Yu. J. Mater. Res. 21, 2261 (2006) doi: 10.1557/jmr.2006.027310.1557/jmr.2006.0273 ↗
15. K.S. Kim, K.W. Ryu, C.H. Yu, J.M. Kim. Microelectron. Reliab. 45, 647 (2005) doi: 10.1016/j.microrel.2004.07.00510.1016/j.microrel.2004.07.005 ↗
16. T. Lchitsubo, E. Matsubara, K. Fujiwara. J. Alloy. Comp. 392, 200 (2005) doi: 10.1016/j.jallcom.2004.09.04310.1016/j.jallcom.2004.09.043 ↗
17. K. Zeng, K.N. Tu. Mater. Sci. Eng. Rep. 38, 55 (2002) doi: 10.1016/S0927-796X(02)00007-410.1016/S0927-796X(02)00007-4 ↗
18. C.W. Hwang, K. Suganuma, M. Kiso, S. Hashimoto. J. Mater. Res. 18, 2540 (2003) doi: 10.1557/JMR.2003.035410.1557/JMR.2003.0354 ↗
19. M. He, W.H. Lau, G.J. Qi, Z. Chen. Thin Solid Films 462, 376 (2004) doi: 10.1016/j.tsf.2004.05.05810.1016/j.tsf.2004.05.058 ↗