journal article·2008-11

Intermetallic Reactions in Sn-0.4Co-0.7Cu Solder BGA Packages with an ENIG Surface Finish

T.H. Chuang, C.C. Jain, H.M. Wu

Journal of Electronic Materials· Volume 37· Issue 11
Publisher page

Abstract

As-cast Sn-0.4Co-0.7Cu solder contains both (Cu0.98Co0.02)6Sn5 and (Co0.85Cu0.15) Sn3 intermetallic phases in the matrix. After reflowing, the Au thin film in the electroless Ni/immersion Au (ENIG) surface-finished Sn-0.4Co-0.7Cu solder ball grid array (BGA) packages dissolved rapidly into the solder matrix to form AuSn4 intermetallics, and a thin layer of (Cu0.57Ni0.35Au0.08)6Sn5 intermetallic compound appeared at the solder/pad interface, growing very slowly during aging at 100°C. Increasing the aging temperature to 150°C caused the formation of a new intermetallic layer, (Ni0.79Cu0.21)3Sn4, at the (Cu0.57Ni0.35Au0.08)6Sn5/Ni interface. The reflowed Sn-0.4Co-0.7Cu BGA packages have a ball shear strength of 6.8 N, which decreases to about 5.7 N and 5.5 N after aging at 100°C and 150°C, respectively. The reflowed and aged solder joints fractured across the solder balls with ductile characteristics in ball shear tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. K. Zeng, K.N. Tu. (2002) Mater. Sci. Eng. R38, 5510.1016/S0927-796X(02)00007-4 ↗
2. L.B. Liu, C. Andersson, J. Liu, Y.C. Chan, Interpack 2003–35126, Int. Electronic Packaging Technical Conf. Exhib. (New York: ASME, 2003), pp. 141–14610.1115/IPACK2003-35126 ↗
3. L.B. Liu, C. Andersson, J. Liu. (2004) J. Electron. Mater. 33, 935. doi: 10.1007/s11664-004-0019-810.1007/s11664-004-0019-8 ↗
4. C. Andersson, P. Sun, and J. Liu, J. Alloys Compd. 457, 97 (2008)10.1016/j.jallcom.2007.03.028 ↗
5. P. Sun, C. Andersson, X. Wei, Z. Cheng, D. Shangguan, J. Liu (2006) Mater. Sci. Eng. B 135, 134. doi: 10.1016/j.mseb.2006.08.05110.1016/j.mseb.2006.08.051 ↗
6. S.K. Kang, V. Ramachandran. (1980) Scripta Metall. 14, 421. doi: 10.1016/0036-9748(80)90338-510.1016/0036-9748(80)90338-5 ↗
7. K.Y. Lee, M. Li. (2001) Metall. Mater. Trans. 32A, 2666. doi: 10.1007/s11661-001-0058-110.1007/s11661-001-0058-1 ↗
8. M.Y. Chiu, S.Y. Chang, Y.H. Tseng, Y.C. Chan, T.H. Chuang, (2002) Z. Metallkd. 93, 24810.3139/146.020248 ↗
9. T.H. Chuang, S.Y. Chang, L.C. Tsao, W.P. Weng, H.M. Wu. (2003) J. Electron. Mater. 32, 195. doi: 10.1007/s11664-003-0193-010.1007/s11664-003-0193-0 ↗
10. J.H. Lau, C.P. Wong, N.C. Lee, R.S.W. Lee, Electronics Manufacturing: With Lead-Free, Halogen-Free, Conductive Adhesive Materials (New York: McGraw-Hill Handbooks, 2003)
11. T.H. Chuang, S.F. Yen, M.D. Cheng. (2006) J. Electron. Mater. 35, 302. doi: 10.1007/BF0269245010.1007/BF02692450 ↗
12. T.H. Chuang, S.F. Yen, H.M. Wu. (2006) J. Electron. Mater. 35, 310. doi: 10.1007/BF0269245110.1007/BF02692451 ↗
13. K. Ishida, T. Nishizawa, (1991) J. Phase Equil. 12, 8810.1007/BF02663681 ↗
14. H. Okamato, (1993) J. Phase Equil. 14, 3
15. U. Gosele, K.N. Tu. (1982) J. Appl. Phys. 53, 3252. doi: 10.1063/1.33102810.1063/1.331028 ↗
16. I.E. Anderson, J.C. Foley, B.A. Cook, J. Harringa, R.L. Terpstra, O. Unal. (2001) J. Electron. Mater. 30, 1050. doi: 10.1007/s11664-001-0129-510.1007/s11664-001-0129-5 ↗