Under bump metallurgy study for Pb-free bumping
Source abstract
Abstract
The demand for Pb-free and high-density interconnection technology is rapidly growing. The electroplating-bumping method is a good approach to meet fine-pitch requirements, especially for high-volume production, because the volume change of patterned-solder bumps during reflow is not so large compared with the stencil-printing method. This paper proposes a Sn/3.5Ag Pb-free electroplating-bumping process for high-density Pb-free interconnects. It was found that a plated Sn/Ag bump becomes Sn/Ag/Cu by reflowing when Cu containing under bump metallurgy (UBM) is used. Another important issue for future flip-chip interconnects is to optimize the UBM system for high-density and Pb-free solder bumps. In this work, four UBM systems, sputtered TiW 0.2 µm/Cu 0.3 µm/electroplated Cu 5 µm, sputtered Cr 0.15 µm/Cr-Cu 0.3 µ/Cu 0.8 µm, sputtered NiV 0.2 µm/Cu 0.8 µm, and sputtered TiW 0.2 µ/NiV 0.8 µm, were investigated for interfacial reaction with electroplated Pb/63Sn and Sn/3.5Ag solder bumps. Both Cu-Sn and Ni-Sn intermetallic compound (IMC) growth were observed to spall-off from the UBM/solder interface when the solder-wettable layer is consumed during a liquid-state "reflow" process. This IMC-spalling mechanism differed depending on the barrier layer material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. M. Cotte, M. Datta, T.E. Dinan, and R.V. Shenoy, U.S. patent 5,800,726 (1998).
2. H. Reichl and J. Wolf (Paper presented at the HDI Conf., Santa Clara, CA, 2001).
3. A.Z. Mirac, Proc. Electronics Goes Green 2000+ (Berlin: Fraunhofer IZM, 2000), pp. 31–36.
4. L. Dietrich, J. Wolf, O. Ehrmann, and H. Reichl, Proc. ISEPT (Beijing: 1998), pp. 17–20.
5. S.-Y. Jang and K.-W. Paik, Solder. Surf. Mt. Technol. 10, 29 (1998).10.1108/09540919810237093 ↗
6. S.-Y. Jang, J. Wolf, O. Ehrmann, H. Gloor, H. Reichl, and K.-W. Paik (Paper presented at the Electronic Components and Technology Conf., Orlando, FL, 2001).
7. H.M. Choi (Ph.D. thesis, KAIST, 1999).
8. F.M. d’Heule and J.M.E. Harper, Thin Solid Films 171, 81 (1989).10.1016/0040-6090(89)90035-7 ↗
9. M. Datta, R.V. Shenoy, C. Jahnes, P.C. Andricacos, J. Horkans, J.O. Dukovic, L.T. Romankiw, J. Roeder, H. Deligianni, H. Nye, B. Agarwala, H.M. Tong, and P. Totta, J. Electrochem. Soc. 142, 3779 (1995).10.1149/1.2048413 ↗
10. E. Suhir, J. Appl. Mech. 55, 143 (1988).10.1115/1.3173620 ↗
11. G. Stoney, Proc. R. Soc. London, Ser. A82, 172 (1909).10.1098/rspa.1909.0021 ↗
12. D.L. Chambers, K.A. Taylor, C.T. Wan, and G.T. Susi, J. Vac. Sci. Technol. A9, 1104 (1991).10.1116/1.577584 ↗
13. D.R. Lide, Handbook of Chemistry and Physics, 72nd ed. (Boca Raton, FL: CRC Press, 1992), pp. 8–17.
14. E. Klokholm and B.S. Berry, J. Electrochem. Soc. 115, 823 (1968).10.1149/1.2411441 ↗
15. D.S. Patterson, P. Elenius, and J.A. Leal, Proc. Inter Pack (1997).
16. B.J. Lee, N.M. Hwang, and H.M. Lee, Acta Mater. 45, 1867 (1997).10.1016/S1359-6454(96)00325-4 ↗
17. S. Bader, W. Gust, and H. Hieber, Acta Mater. 43, 329 (1995).
18. Z. Mei, A.J. Sunwoo, and J.W. Morris, Jr., Metal. Trans. A, 23A, 857 (1992).10.1007/BF02675563 ↗
19. D.R. Flanders, E.G. Jacobs, and R.F. Pinizzotto, J. Electron. Mater. 26, 883 (1997).10.1007/s11664-997-0268-4 ↗
20. K.N. Tu and K. Zeng, Mater. Sci. Eng. R 34, 1 (2001).10.1016/S0927-796X(01)00029-8 ↗
21. R.J. Fields, S.R. Low III, and G.K. Lucey, Met. Sci. Joining, 165 (1992).
22. W.K. Choi and H.M. Lee, J. Electron. Mater. 29, 1207 (2000).10.1007/s11664-000-0014-7 ↗
23. H.K. Kim and K.N. Tu, Phys. Rev. B, 53, 16027 (1996).10.1103/PhysRevB.53.16027 ↗
24. C.Y. Liu, H.K. Kim, K.N. Tu, and P.A. Totta, Appl. Phys. Lett. 69, 4014 (1996).10.1063/1.117855 ↗
25. B.S. Berry and I. Ames, IBM J. Res. Dev. 13, 286 (1969).10.1147/rd.133.0286 ↗
26. P.A. Totta and R.P. Sopher, IBM J. Res. Dev. 13, 226 (1969).10.1147/rd.133.0226 ↗
27. T. Liu, D. Kim, D. Leung, M.A. Korhenen, and C.-Y. Li, Scripta Mater. 35, 65 (1996).10.1016/1359-6462(96)00104-2 ↗
28. G.Z. Pan, A.A. Liu, H.K. Kim, K.N. Tu, and P. Totta, Appl. Phys. Lett. 71, 2946 (1997).10.1063/1.120224 ↗
29. S.-Y. Jang, J. Wolf, O. Ehrmann, H. Gloor, H. Reichl, and K.-W. Paik, IEEE Trans. Comp. Packag. Technol., in press.
30. H.P.R. Rederikse, R.J. Fields, and A. Feldman, J. Appl. Phys. 72, 2879 (1992).10.1063/1.351487 ↗
31. R.J.K. Wassink, Soldering in Electronics, 2nd ed. (Ayr, Scotland: Electrochemical Publication Ltd., 1989), p. 103.
32. P. Elenius, J. Leal, J. Ney, D. Stepniak, and S. Yeh, Proc. Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1999), pp. 260–65.
33. C.Y. Liu, K.N. Tu, T.T. Sheng, C.H. Tung, D.R. Frear, and P. Elenius, J. App. Phys. 87, 2, 750 (2000).
34. S.-Y. Jang and K.-W. Paik, IEEE Trans. Electron. Packag. Manuf., 24, 269 (2001).10.1109/6104.980035 ↗
35. S. Honma, K. Tateyama, H. Yamada, and M. Saito, Proc. ISHM (1996), pp. 87–92.
36. H. Ezawwa, M. Miyata, and S. Hronoma, Proc. of Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2000), pp. 1095–1100.
37. W.K. Choi, S.-Y. Jang, J.H. Kim, K.-W. Paik, and H.M. Lee, J. Mater. Res., 17, 597 (2002).10.1557/JMR.2002.0084 ↗
38. A.A. Liu, H.K. Kim, K.N. Tu, and P.A. Totta, Appl. Phys. Lett. 80, 2774 (1996).
39. G. Ghosh, Acta Mater. 49, 2609 (2001).10.1016/S1359-6454(01)00187-2 ↗
40. K. Zeng, V. Vuorinen, and J.K. Kivilahti, Proc. of Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2001), pp. 693–698.
41. J.W. Jang, D.R. Frear, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 88, 6359 (2000).10.1063/1.1321787 ↗
42. I. Shonhji, F. Mori, and K. Kobarashi, Mater. Trans.-JIM 42, 790 (2001).10.2320/matertrans.42.790 ↗
43. D.R. Frear, J.W. Jang, J.K. Lin, and C. Zhang, JOM 53 (2001), p. 28.10.1007/s11837-001-0099-3 ↗
44. S.K. Kang, R.S. Rai, and S. Purushothaman, J. Electron. Mater. 25, 7 (1996).10.1007/BF02666167 ↗
45. S.-W. Chen and Y.-W. Yen, J. Electron. Mater. 28, 11 (1999).
46. K. Zeng and J.K. Kivilahti, J. Electron. Mater. 30, 1 (2001).10.1007/s11664-001-0215-8 ↗
47. K. Suganuma, H.-H. Huh, K. Kim, H. Nakase, Y. Nakamura, and H. Nakase, Mater. Trans.-JIM 42, 286 (2001).10.2320/matertrans.42.286 ↗
48. W. Yang, R.W. Messler, and L.E. Felton, J. Electron. Mater. 23, 765 (1994).10.1007/BF02651371 ↗