Interfacial reactions in the pb-free composite solders with indium layers
Source abstract
Abstract
A Pb-free composite solder is prepared with a Pb-free solder substrate and a plated-indium layer. The indium layer melts during the soldering process, wets the substrates, and forms a sound solder joint. Since the melting temperature of indium is 156.6°C, lower than that of the eutectic Sn-Pb, which is at 183°C, the soldering process can be carried out at a temperature lower than that of the conventional soldering process. Composite solder joints with three different Pb-free solders, Sn, Sn-3.5 wt.% Ag, and Sn-3.5 wt.% Ag-0.5 wt.% Cu, and two substrates, Ni and Cu, are prepared. The interfaces between the indium layer, Pb-free solder, and Ni and Cu substrate are examined. A good solder joint is formed after a 2-min reflow at 170°C. A very thick reaction zone at the indium/Pb-free solder interface and a thin reaction layer at the indium/substrate interface are observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. R.J.K. Wassink, Soldering in Electronics, 2nd ed. (British Isles: Electrochemical Publications Ltd. 1989), pp. 300–370.
2. M.E. Loomans, M.E. Fine, and K. Suganuma, Metall. Mater. Trans. A 31A, 1155 (2000).10.1007/s11661-000-0111-5 ↗
3. Y.D. Jeon, S. Nieland, A. Ostmann, H. Reichl, and K.W. Paik, J. Electron. Mater. 32, 548 (2003).10.1007/s11664-003-0141-z ↗
4. National Electronics Manufacturing, “Lead-Free Assembly Projects,” National Electronics Manufacturing Initiatives (1999), http://www.nemi.org/projects/ese/lf_assembly.html.
5. J.Y. Tsai, Y.C. Hu, C.M. Tsai, and C.R. Kao, J. Electron. Mater. 32, 1203 (2003).10.1007/s11664-003-0012-7 ↗
6. S.-W. Chen, S.H. Wu, and S.W. Lee, J. Electron. Mater. 32, 1188 (2003).10.1007/s11664-003-0010-9 ↗
7. L.C. Shiau C.E. Ho, and C.R. Kao, Soldering Surf. Mount Technol. 14, 25 (2002).10.1108/09540910210444692 ↗
8. S.-W. Chen, S.-K. Lin, C.-F. Yang, Y.-C. Huang, T.-Y. Chung, Y.-M. Tsai, and A.-R. Zi, Taiwan Patent TW I238095, U.S. patent application, 20050269385, (2005).
9. J.W. Nah, K.W. Paik, J.O. Suh, and K.N. Tu, J. Appl. Phys. 94 (12), 7560 (2003).10.1063/1.1628388 ↗
10. J.S. Lee, W.H. Bang, J.P. Jung, K.J. Oh, and N. Zhou (Paper presented at TMS Annual Meeting, Charlotte, NC, 2004).
11. C.Y. Huang and S.-W. Chen, J. Electron. Mater. 31, 152 (2002).10.1007/s11664-002-0162-z ↗
12. L.H. Su, Y.W. Yen, C.C. Lin, and S.-W. Chen, Metall. Mater. Trans. B 28B, 927 (1997).10.1007/s11663-997-0020-8 ↗
13. C.L. Yu, S.S. Wang, and T.H. Chuang, J. Electron. Mater. 31, 488 (2002).10.1007/s11664-002-0104-9 ↗
14. P.T. Vianco, P.F. Hlava, and A.C. Kilgo, J. Electron. Mater. 23, 583 (1994).10.1007/BF02653343 ↗
15. C. Zhang, J.K. Shang, and P. Liu, Electronic Components & Technology, Conf. 50th Proc. (Piscataway, NJ: IEEE, 2000), pp. 138–141.