journal article·2012-08

Dielectric and Thermal Properties of Polyimide–Poly(ethylene oxide) Nanofoamed Films

Yi-He Zhang, Li Yu, Li-Hang Zhao, Wang-Shu Tong, Hai-Tao Huang, Shan-Ming Ke, H. L. W. Chan

Journal of Electronic Materials· Volume 41· Issue 8
Publisher page

Abstract

Polyimide nanofoamed films have been prepared by incorporating poly(ethylene oxide) (PEO) into poly(amide acid) (PAA) precursors with subsequent imidization of PAA precursors at high temperature. The porous structure, thermal decomposition temperature, and dielectric property of nanofoamed films were investigated by scanning electron microscopy, thermogravimetric analysis, and impedance spectroscopy. Nanopores with sizes around 40 nm to 200 nm were formed in nanofoamed films by pyrolysis of PEO during the imidization progress. The decomposition temperature of nanofoamed films decreased slightly with increasing volume fraction of nanopores and maintained the high decomposition temperature of 499.7 °C when the volume fraction of nanopores was 10.9 %. The dielectric constant of nanofoamed films decreased from 3.4 for pure PI to 2.4 at 103 Hz through the introduction of nanopores with volume fraction of 10.9 %.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Synthesis and properties of polymers · Polymer Nanocomposites and Properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. S. Muruganand, S.K. Varayandass, D. Mangalaraj, and T.M. Vijayan, Polym. Int. 50, 1089 (2001).10.1002/pi.749 ↗
2. A. Kuntman and H. Kuntman, J. Microelectron. 3, 1629 (2000).
3. W.J. Chou, C.C. Wang, and C.Y. Chen, Compos. Sci. Technol. 68, 2208 (2008).10.1016/j.compscitech.2008.04.008 ↗
4. Y.H. Yu, J.M. Yeh, S.J. Liou, and Y.P. Chang, Acta Mater. 52, 475 (2004).10.1016/j.actamat.2003.09.031 ↗
5. Z.M. Liang, H. Yin, and H.H. Xu, Polymer 44, 1391 (2003).10.1016/S0032-3861(02)00911-4 ↗
6. X.S. Wang, Y.H. Zhang, S.Y. Fu, and X.Q. Feng, Acta Mech. Solida Sin. 18, 200 (2005).
7. M. Bin Ahmad, Y. Gharayebi, M.S. Salit, M.Z. Hussein, and K. Shameli, Int. J. Mol. Sci. 12, 6040 (2011).10.3390/ijms12096040 ↗
8. L.Y. Jiang, C.M. Leu, and K.H. Wei, Adv. Mater. 14, 426 (2002).10.1002/1521-4095(20020318)14:6<426::AID-ADMA426>3.0.CO;2-O ↗
9. Y.H. Yu, J.M. Yeh, S.J. Liou, C.L. Chen, D.J. Liaw, and H.Y. Lu, J. Appl. Polym. Sci. 92, 3573 (2004).10.1002/app.20400 ↗
10. C.C. Huang, G.W. Jang, K.C. Chang, W.I. Hung, and J.M. Yeh, Polym. Int. 57, 605 (2008).10.1002/pi.2381 ↗
11. C. Nah, S.H. Han, J.H. Lee, M.H. Lee, and K.H. Chung, Polym. Int. 53, 891 (2004).10.1002/pi.1454 ↗
12. K.Y. Mya, K. Wang, L. Chen, T.T. Lin, P.K. Pallathadka, J.S. Pan, and C.B. He, Macromol. Chem. Phys. 209, 643 (2008).10.1002/macp.200700470 ↗
13. C.C. Chang and W.C. Chen, Chem. Mater. 14, 4242 (2002).10.1021/cm0202310 ↗
14. Y. Huang and Y. Gu, J. Appl. Polym. Sci. 88, 2210 (2003).10.1002/app.11885 ↗
15. S.Y. Fu and B. Zheng, Chem. Mater. 20, 1090 (2008).10.1021/cm7020966 ↗
16. Y.H. Zhang, Y.Q. Li, S.Y. Fu, J.H. Xin, W.A. Daoud, and L.F. Li, Polymer 46, 8373 (2005).10.1016/j.polymer.2005.07.012 ↗
17. S. Vural, S. Koytepe, T. Seckin, and I. Adiguzel, Mater. Res. Bull. 46, 1679 (2011).10.1016/j.materresbull.2011.05.036 ↗
18. M.B.H. Othman, N.A.S. Ming, H.M. Akil, and Z. Ahmad, J. Appl. Polym. Sci. 121, 3192 (2011).10.1002/app.33837 ↗
19. Y.H. Zhang, S.G. Lu, Y.Q. Li, Z.M. Dang, J.H. Xin, S.Y. Fu, G.T. Li, R.R. Guo, and L.F. Li, Adv. Mater. 17, 1056 (2005).10.1002/adma.200401330 ↗
20. Y.H. Zhang, Z.M. Dang, J.H. Xin, W.A. Daoud, J.H. Ji, Y.Y. Liu, B. Fei, Y.Q. Li, J.T. Wu, S.Y. Yang, and L.F. Li, Macromol. Rapid. Comm. 26, 1473 (2005).10.1002/marc.200500310 ↗
21. Z. Ahmad and J.E. Mark, Chem. Mater. 13, 3320 (2001).10.1021/cm010175n ↗
22. Z.M. Dang, Y.Q. Lin, H.P. Xu, C.Y. Shi, S.T. Li, and J. Bai, Adv. Funct. Mater. 18, 1509 (2008).10.1002/adfm.200701077 ↗
23. A. Alias, Z. Ahmad, and A.B. Ismail, Mater. Sci. Eng. B 176, 799 (2011).10.1016/j.mseb.2011.04.001 ↗