Pulsed-magnetron-sputtered low-temperature indium tin oxide films for flat-panel display applications
Source abstract
Abstract
In this paper, indium tin oxide (ITO) thin films were prepared by unipolar and bipolar direct current (DC)-pulsed magnetron sputtering in a mixture of argon and oxygen onto unheated glass substrates. The target of ITO with 10 wt.% tin is used. The influences of polar modes (unipolar and bipolar); output frequencies (0 to 33 kHz); and times and off times on the optical, electrical, and structural properties of ITO films are investigated. The correlations between the deposition parameters and the film properties are discussed. It is found that the resistivity with 10-3 Ω-cm and transmittance with ≥90% of amorphous ITO films can be prepared by the reactive bipolar DC-pulsed sputtering with t-on between 45 µs and 85 µs (i.e., t-on/t+on is 9-17), and t+on, t-off and t+off are constant at 5 µs, 10 µs, and 5 µs, respectively. An optimal condition, based on the polar mode and frequency of reactive-pulsed sputtering, for obtaining the high transmittance and low resistivity of ITO films is suggested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. J.L. Vossen, Phys. Thin Films 9, 1 (1977).
2. R.P. Howson and M.I. Ridge, Proc. SPIE 324, 16 (1982).10.1117/12.933249 ↗
3. T. Karasawa and Y. Miyata, Thin Solid Film 223, 135 (1993).10.1016/0040-6090(93)90737-A ↗
4. T. Oyama, N. Hashimoto, J. Shimizu, Y. Akao, H. Kojima, K. Aikawa, and K. Suzuki, J. Vac. Sci. Technol. A10, 1682 (1992).10.1116/1.577769 ↗
5. J.A. Doborwolski, F.C. Ho, D. Menagh, R. Simpson, and A. Waldorf, Appl. Opt. 26, 5204 (1987).10.1364/AO.26.005204 ↗
6. R.Y. Tsai, F.C. Ho, and M.Y. Hua, Opt. Eng. 36, 2335 (1997).10.1117/1.601461 ↗
7. S.B. Lee, J.C. Pincenti, A. Cocco, and D.L. Naylor, J. Vac. Sci. Technol. A11, 2742 (1993).10.1116/1.578635 ↗
8. K. Carl, H. Schmitt, and I. Friedrich, Thin Solid Films 295, 151 (1997).10.1016/S0040-6090(96)09167-5 ↗
9. W.F. Wu and B.S. Chiou, Appl. Surf. Sci. 68, 497 (1993).10.1016/0169-4332(93)90233-2 ↗
10. S. Schiller, K. Goedicke, J. Reschke, V. Kirchhoff, S. Schneider, and F. Milde, Surf. Coatings Technol. 61, 331 (1993).10.1016/0257-8972(93)90248-M ↗
11. M. Scherer, J. Schmitt, R. Latz, and M. Schanz, J. Vac. Sci. Technol. A10, 1772 (1992).10.1116/1.577745 ↗
12. G. Este and W.D. Westwood, J. Vac. Sci. Technol. A6, 1845 (1988).10.1116/1.575266 ↗
13. S. Honda, A. Tsujimoto, M. Watamori, and K. Oura, J. Vac. Sci. Technol. A13, 1100 (1995).10.1116/1.579593 ↗
14. Iorganic File, Plate 6-416 (Swarthmore, PA: International Center for Diffraction Data, 1998).
15. B.D. Cullity, Elements of X-ray Diffraction (Reading, MA: Addison-Wesley Publishing Company, Inc., 1978).
16. T. Minami, T. Kakumu, Y. Takeda, and S. Takata, Thin Solid Films 290–291, 1 (1996).10.1016/S0040-6090(96)09094-3 ↗
17. K. Sreenivas, T.S. Rao, A. Mansingh, and S. Chandra, J. Appl. Phys. 57, 384 (1985).10.1063/1.335481 ↗
18. D.A. Glocker, J. Vac. Sci. Technol. A11, 2989 (1993).10.1116/1.578286 ↗