Textured growth of Cu/Sn intermetallic compounds
Source abstract
Abstract
The growth of Cu-Sn intermetallic compounds (IMCs) at the molten Pb-Sn solder/Cu interface was studied over a range of temperatures and for a range of solder compositions. Strong peaks of $$(10\bar 12)$$ and $$(10\bar 11)$$ planes of η-phase (Cu6Sn5) were detected by x-ray diffraction when the Sn content was high. In the low Sn solder (27Sn-73Pb), the η-phase peaks were absent at the two high temperatures, but the (2 12 0) peak of the ε-phase (Cu3Sn) was prominent. A texture was detected in both layers in $$(10\bar 11)$$ and (002) pole figures constructed for the η phase and ε phase, respectively. The growth directions were identified to be 〈101〉 and 〈102〉 for the η phase and 〈102〉 and 〈031〉 for the ε phase, normal to the Cu surface. The growth direction does not change with the morphology and the thickness of the IMC layer. The morphology of the η layer varied gradually from a cellular film with a rugged interface to a dense film with a scalloped interface as the Pb content, temperature, and reaction time increased. The ε layer was always dense and nearly planar.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. P.T. Vianco, P.F. Hlava, and A.C. Kilgo, J. Electron. Mater. 23, 583 (1994).10.1007/BF02653343 ↗
2. Y.G. Lee and J.G. Duh, J. Mater. Sci.: Mater. Electron. 10, 33 (1999).
3. A.J. Sunwoo, J.W. Morris, Jr., and G.K. Lucey, Jr., Metall. Trans. A 23A, 1323 (1992).10.1007/BF02665064 ↗
4. Y.C. Chan, A.C.K. So, and J.K.L. Lai, Mater. Sci. Eng. B B55, 5 (1998).10.1016/S0921-5107(98)00202-5 ↗
5. K.N. Tu, Acta Metall. 21, 347 (1973).10.1016/0001-6160(73)90190-9 ↗
6. P.T. Vianco, A.C. Kilgo, and R. Grant, J. Electron. Mater. 24, 1493 (1995).10.1007/BF02655468 ↗
7. A. Hayashi, C.R. Kao, and Y.A. Chang, Scripta Mater. 37, 393 (1997).10.1016/S1359-6462(97)00129-2 ↗
8. S. Bader, W. Gust, and H. Hieber, Acta Metall. Mater. 43, 329 (1995).
9. A.C.K. So and Y.C. Chan, IEEE Trans. Comp., Packag., Manuf. Technol. B 19, 661 (1996).10.1109/96.533909 ↗
10. H.K. Kim, H.K. Liou, and K.N. Tu, Appl. Phys. Lett. 66, 2337 (1995).10.1063/1.113975 ↗
11. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
12. C.M. Miller, I.E. Anderson, and J.F. Smith, J. Electron. Mater. 23, 595 (1994).10.1007/BF02653344 ↗
13. U.S. patent 5,527,628 (18 June 1996).
14. Joint Committee on Powder Diffraction Standards, 02-0713, (Pennsylvania: International Center for Diffraction Data, 1997).
15. Joint Committee on Powder Diffraction Standards, 01-1240, (Pennsylvania: International Center for Diffraction Data, 1997).
16. Stefan Weber, http://www.nirin.go.jp
17. B.D. Cullity, Elements of X-ray Diffraction, 2nd ed. (Reading, MA: Addison-Wesley Pub. Co., 1978).
18. D. Yao and J.K. Shang, IEEE Trans. Comp., Packag., Manuf. Technol. B 19, 154 (1996).10.1109/96.486498 ↗