Thermal Effect of Ceramic Substrate on Heat Distribution in Thermoelectric Generators
Source abstract
Abstract
In thermoelectric generators (TEG), poor system design and load matching, which make the system less efficient, have been limiting factors in achieving high conversion efficiency. In this work, to consider the effect of the inlet plenum arrangement and the laminar coolant flow temperature variation in the heat sink, a parallel microchannel heat sink is applied to a real TEG. The focus of this study is a discussion of the temperature difference variation between the cold/hot sides of the TEG legs versus the variation of the thermal conductivity of the ceramic substrate and the thickness of the substrate on the hot side. While the imposed heat flux on the TEG is homogeneously constant, different pressure drops are applied along the microchannel heat sink. The three-dimensional governing equations for the fluid flow and heat transfer are solved using the finite-volume method. The results show that the temperature difference is affected remarkably by the pressure drops in the heat sink, the thermal conductivity of the ceramic substrate, and the thickness of the substrate on the hot side.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat Transfer and Optimization · Heat Transfer and Boiling Studies · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. A. Rezania and L.A. Rosendahl, J. Electron. Mater. 40, 481 (2011).10.1007/s11664-011-1622-0 ↗
2. K. Schubert, J. Brandner, M. Fichtner, G. Linder, U. Schygulla, and A. Wenka, Nanoscale Microscale Thermophys. Eng. 5, 17 (2010).10.1080/108939501300005358 ↗
3. X.F. Peng and G.P. Peterson, Int. J. Heat Mass Transf. 39, 2599 (1996).10.1016/0017-9310(95)00327-4 ↗
4. P. Naphon, S. Klangchart, and S. Wongwises, Int. Commun. Heat Mass Transf. 36, 834 (2009).10.1016/j.icheatmasstransfer.2009.06.010 ↗
5. R. Chein and J. Chen, Int. J. Therm. Sci. 48, 1627 (2009).10.1016/j.ijthermalsci.2008.12.019 ↗
6. M. Chen, S.J. Andreasen, L. Rosendahl, S.K. Kær, and T. Condra, J. Electron. Mater. 39, 1593 (2010).10.1007/s11664-010-1270-9 ↗
7. K. Shimizu, Y. Takase, and M. Takeda, J. Electron. Mater. 38, 1371 (2009).10.1007/s11664-009-0657-y ↗
8. D.M., Rowe, CRC Handbook of Thermoelectrics (Boca Raton: CRC Press, 1995), ISBN 0-83-0146-7, p. 19.10.1201/9781420049718 ↗
9. Y. Chen, C. Zhang, M. Shi, and J. Wu, Int. Commun. Heat Mass Transf. 36, 917 (2009).10.1016/j.icheatmasstransfer.2009.06.004 ↗
10. H. Wang, W.D. Porter, and J. Sharp (24th International Conference on Thermoelectrics 2005, IEEE, 2005), p. 91.10.1109/ICT.2005.1519895 ↗