Texture enhancement of Al films on Ti underlayers by radio-frequency bias sputtering
Source abstract
Abstract
The influence of sputtering pressure and radio-frequency (RF) bias power on the texture of Al/Ti thin films has been investigated. The Al/Ti thin films were deposited sequentially onto thermally oxidized Si wafers in a direct-current (DC) magnetron system. The RF bias was applied during Ti deposition. The texture of Al thin films was quantified by θ-2θ scans and rocking curves of x-ray diffraction (XRD). The Al thin films deposited on bias-sputtered Ti underlayers showed an epitaxial growth and strong (111) texture. The Al (111) texture improved with decreasing sputtering pressure and increasing RF-bias power. The Al/Ti texture was also enhanced when the SiO2/Si substrate surface was RF plasma cleaned prior to Ti deposition. The Al (111) texture was closely related to Ti (0002) texture. The mechanism of Ti-texture improvement by applying bias sputtering was explained based on the ion-bombardment effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. H. Shibata, M. Murota, and K. Hashimoto, Jpn. J. Appl. Phys. 32, 4479 (1993).10.1143/JJAP.32.4479 ↗
2. D.P. Tracy, D.B. Knorr, and K.P. Rodbell, J. Appl. Phys. 76, 1 (1994).10.1063/1.357564 ↗
3. D.B. Knorr, D.P. Tracy, and K.P. Rodbell, Appl. Phys. Lett. 59, 3241 (1991).10.1063/1.105745 ↗
4. D.B. Knorr and T.M. Lu, Appl. Phys. Lett. 54, 2210 (1989).10.1063/1.101126 ↗
5. S. Vaidya and A.K. Sinha, Thin Solid Films 75, 253 (1981).10.1016/0040-6090(81)90404-1 ↗
6. H.T. Jeong, J.A. Szpunar, D. Field, and K. Lee, Proc. 12th Int. Conf. on Textures of Materials (Ottawa: NRC Research Press, 1999), p. 1369.
7. K. Lee, J.A. Szpunar, A. Morawiec, D.B. Knor, and K.P. Rodbell, Can. Met. Q. 34, 287 (1995).10.1179/cmq.1995.34.3.287 ↗
8. B.S. Eun and Y.-H. Kim, J. Kor. Phys. Soc. 35, 353 (1999).
9. T. Sasaki and H. Dohnomae, Jpn. J. Appl. Phys. 37, 6544 (1998).10.1143/JJAP.37.6544 ↗
10. D.S. Gardner, J.D. Meindl, and K.C. Saraswat, IEEE Trans. Electron. Dev. 34, 633 (1987).10.1109/T-ED.1987.22974 ↗
11. J.K. Howard, J.F. White, and P.S. Ho, J. Appl. Phys. 49, 4083 (1978).10.1063/1.325369 ↗
12. H.H. Hoang, R.A. Coy, and J.W. McPherson, Proc. 7th Int. VLSI Multilevel Interconnection Conf. (Piscataway, NJ: IEEE, 1990), pp. 133–141.10.1109/VMIC.1990.127856 ↗
13. T. Mitsuzuka, Jpn. J. Appl. Phys. 31, 1280 (1992).10.1143/JJAP.31.L1280 ↗
14. K.P. Rodbell, D.B. Knorr, and D.P. Tracy, Mater. Res. Soc. Symp. Proc. 265, 107 (1992).10.1557/PROC-265-107 ↗
15. S. Yoo, Y.-H. Kim, and C.S. Yoon, J. Vac. Technol. B19, 856 (2001).10.1116/1.1362681 ↗
16. H. Toyada, T. Kawanoue, M. Hasunuma, H. Kaneko, and M. Miyauchi, 32nd Ann. Proc. Reliab. Phys. 1]78 (1994).
17. D.S. Park, S. Yoo, and Y.-H. Kim, Proc. 8th Korean Conf. on Semiconductors (Seoul, Korea: KSIA, 2001), pp. 173–174.
18. R. Bunshah, ed., Handbook of Deposition Technologies for Films and Coatings, 2nd ed., (Park Ridge, NJ: Noyes Pub., 1994), pp. 306–309.
19. M. Marinnov, Thin Solid Films 46, 267 (1977).10.1016/0040-6090(77)90182-1 ↗
20. K. Kamoshida and Y. Ito, J. Vac. Sci. Technol. B15, 961 (1997)10.1116/1.589515 ↗
21. D.S. Park (M.S. thesis, Hanyang University, 2001).