journal article·2013-08

Spreading Behavior and Evolution of IMCs During Reactive Wetting of SAC Solders on Smooth and Rough Copper Substrates

Satyanarayan, K. N. Prabhu

Journal of Electronic Materials· Volume 42· Issue 8
Publisher page

Abstract

The effect of surface roughness of copper substrate on the reactive wetting of Sn-Ag-Cu solder alloys and morphology of intermetallic compounds (IMCs) was investigated. The spreading behavior of solder alloys on smooth and rough Cu substrates was categorized into capillary, diffusion/reaction, and contact angle stabilization zones. The increase in substrate surface roughness improved the wetting of solder alloys, being attributed to the presence of thick Cu3Sn IMC at the interface. The morphology of IMCs transformed from long needle shaped to short protruded type with an increase in the substrate surface roughness for the Sn-0.3Ag-0.7Cu and Sn-3Ag-0.5Cu solder alloys. However, for the Sn-2.5Ag-0.5Cu solder alloy the needle-shaped IMCs transformed to the completely scallop type with increase in the substrate surface roughness. The effect of Ag content on wetting behavior was not significant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. J.S. Hwang, Implementing Lead-Free Electronics (New York: McGraw-Hill, 2005), pp. 1–20.
2. D.Q. Yu and L. Wang, J. Alloys Compd. 458, 542 (2008).10.1016/j.jallcom.2007.04.047 ↗
3. H. Ma and J.C. Suhling, J. Mater. Sci. 44, 1141 (2009).10.1007/s10853-008-3125-9 ↗
4. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
5. Y. Sun, J. Liang, Z.H. Xu, G. Wang, and X. Li, J. Mater. Sci.: Mater. Electron. 19, 514 (2008).10.1007/s10854-007-9374-6 ↗
6. H.R. Kotadia, O. Mokhtari, M.P. Clode, M.A. Green, and S.H. Mannan, J. Alloys Compd. 511, 176 (2012).10.1016/j.jallcom.2011.09.024 ↗
7. D. Suh, D.W. Kim, P. Liu, H. Kim, J.A. Weninger, C.M. Kumar, A. Prasad, B.W. Grimsley, and H.B. Tejada, Mater. Sci. Eng. A 460-461, 595 (2007).10.1016/j.msea.2007.01.145 ↗
8. A. Syed, T.S. Kim, S.W. Cha, J. Scanlon, and C.G. Ryu, Electronic Components and Technology Conference, Reno, 2007, pp. 951–956.
9. K. Zeng and B. Holdford, 12th Electronics Packaging Technology Conference (EPTC), 8–10 Dec 2010, pp. 652–659.
10. F. Cheng, F. Gao, J. Zhang, W. Jin, and X. Xiao, J. Mater. Sci. 46, 3424 (2011).10.1007/s10853-010-5231-8 ↗
11. N. Mookam and K. Kanlayasiri, J. Mater. Sci. Technol. 28, 53 (2012).10.1016/S1005-0302(12)60023-1 ↗
12. N. Mookama and K. Kanlayasiri, J. Alloys Compd. 509, 6276 (2011).10.1016/j.jallcom.2011.03.049 ↗
13. K. Kanlayasiri, M. Mongkolwongrojn, and T. Ariga, J. Alloys Compd. 485, 225 (2009).10.1016/j.jallcom.2009.06.020 ↗
14. L. Wang, F. Sun, Y. Liu, and L.W. Wang, International Conference on Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), Beijing, 2009.
15. S. Fenglian, Z. Pengfei, and L. Yang, The 6th International Forum on Strategic Technology, Aug 22–24 2011, pp. 177–180.
16. G. Montesperelli, M. Rapone, F. Nanni, P. Travaglia, P. Riani, R. Marazza, and G. Gusmano, Mater. Corros. 59, 662 (2008).10.1002/maco.200804098 ↗
17. J.H. Lee, A.M. Yu, J.H. Kim, M.S. Kim, and N. Kang, Metall. Mater. Int. 14, 649 (2008).10.3365/met.mat.2008.10.649 ↗
18. R. Mayappan, A.B. Ismail, Z.A. Ahmed, T. Ariga, and L.B. Hussain, J. Teknol. 46, 1 (2007).
19. Y.Y. Chen and J.G. Duh, J. Mater. Sci.: Mater. Electron. 11, 279 (2000).10.1023/A:1008917530144 ↗
20. S.J. Hitchcock, N.T. Carroll, and M.G. Nicholas, J. Mater. Sci. 16, 714 (1981).10.1007/BF02402789 ↗
21. G. Li, J. Mater. Sci. Lett. 11, 1551 (1992).10.1007/BF00740830 ↗
22. F.G. Yost, R.R. Rye, and J.A. Mann Jr., Acta Mater. 45, 5337–5345 (1997).10.1016/S1359-6454(97)00205-X ↗
23. Z.X. Rui, Y.Z. Fu, Z.H. Xin, Z.L. Kun, and L.J. Qiang, Chin. Sci. Bull. 55, 797 (2010).10.1007/s11434-010-0056-z ↗
24. G. Kumar and K.N. Prabhu, Adv. Colloid Interf. Sci. 133, 61 (2007).10.1016/j.cis.2007.04.009 ↗
25. J.O. Suh, K.N. Tu, and N. Tamura, J. Appl. Phys. 102, 063511 (2007).10.1063/1.2776002 ↗
26. Y.W. Park, T.S.N. Sankara Narayanan, and K.Y. Lee, Wear 262, 320 (2007).10.1016/j.wear.2006.05.020 ↗
27. Satyanarayan and Prabhu, J. Mater. Sci.: Mater. Electron. 23, 1664 (2012).10.1007/s10854-012-0644-6 ↗
28. R.A. Lord and A. Umantsev, J. Appl. Phys. 98, 063525 (2005).10.1063/1.2058186 ↗
29. J.H. Lee, D.H. Shin, and Y.S. Kim, Metall. Mater. Int. 9, 577 (2003).10.1007/BF03027258 ↗
30. Y. Wang, K. Zhang, C. Li, L. Hand, and Q. Zhang, Mater. Sci. Forum 687, 112 (2011).10.4028/www.scientific.net/MSF.687.112 ↗
31. J.H. Lee, J.H. Park, Y.H. Lee, and Y.S. Kim, J. Mater. Res. 16, 1227 (2001).10.1557/JMR.2001.0169 ↗