Geometrical effect of bump resistance for flip-chip solder joints: Finite-element modeling and experimental results
Source abstract
Abstract
The bump resistance of flip-chip solder joints was measured experimentally and analyzed by the finite-element method. Kelvin structures for flip-chip solder joints were designed and fabricated to measure the bump resistance. The measured value was only about 0.9 mΘ at room temperature, which was much lower than that expected. Three-dimensional (3-D) modeling was performed to examine the current and voltage distribution in the joint. The simulated value was 7.7 mΘ, which was about 9 times larger than the experimental value. The current crowding effect was found to be responsible for the difference in bump resistance. Therefore, the measured bump resistance strongly depended on the layout of the Kelvin structure. Various layouts were simulated to investigate the geometrical effect of bump resistance, and a significant geometrical effect was found. A proper layout was proposed to measure the bump resistance correctly. The Kelvin structure would play an important role in monitoring void formation and microstructure changes during the electromigration of flip-chip solder joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. International Technology Roadmap for Semiconductors (San Jose, CA: Semiconductor Industry Association, 2003), pp. 4–9.
2. K.N. Tu and K. Zeng, Mater. Sci. Eng., R R34, 1 (2001).
3. T.L. Shao, S.H. Chiu, Chih Chen, D.J. Yao, and C.Y. Hsu, J. Electron. Mater. 33, 1350 (2004).10.1007/s11664-004-0164-0 ↗
4. S.J. Proctor and L.W. Linholm, IEEE Electron Dev. Lett. EDL-3, 294 (1982).10.1109/EDL.1982.25574 ↗
5. W.M. Loh, K. Saraswat, and R.W. Dutton, IEEE Electron Dev. Lett. EDL-6, 105 (1985).10.1109/EDL.1985.26061 ↗
6. M. Natan, S. Purushothan, and R. Dobrowski, J. Appl. Phys. 53, 5776 (1982).10.1063/1.331413 ↗
7. D.S. Liu and C.Y. Ni, Microelectron. Eng. 63, 363 (2002).10.1016/S0167-9317(02)00551-8 ↗
8. K.N. Tu, J. Appl. Phys. 94, 5451 (2003).10.1063/1.1611263 ↗
9. S. Gee, N. Nguyen, J. Huang, and K.N. Tu, Proceedings of 2005 International Wafer-level Packaging Conference (IWLPC), (San Jose, CA: Surface Mount Technology Association), pp. 159–167.
10. P. Su, M. Ding, T. Uehling, D. Wontor, and P.S. Ho, Proc. Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2005), pp. 1431–1436.
11. B. Ebersberger, R. Bauer, and L. Alexa, Proc. Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2005), pp. 1407–1415.
12. T.L. Shao, S.W. Liang, T.C. Lin, and C. Chen, J. Appl. Phys. 98, 044509 (2005).10.1063/1.2000667 ↗
13. J.H. Kiely, D.V. Morgan, and D.M. Rowe, Meas. Sci. Technol. 5(2), 182 (1994).10.1088/0957-0233/5/2/015 ↗
14. C.N. Liao, C. Chen, and K.N. Tu, J. Appl. Phys. 86, 3204 (1999).10.1063/1.371190 ↗
15. J. Zhang and D. Baldwin, Proc. IEEE 8th Int. Symp. on Advanced Packaging Materials (Piscataway, NJ: IEEE, 2002), pp. 97–103.
16. M. Amagai, Y. Toyoda, T. Ohnishi, and S. Akita, Proc. Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2004), pp. 1304–1309.